Fortinet FortiMail-100 Manual de usuario

POWER

STATUS

4321

LINK / ACT

10/100

Back

Internal Interface,

switch connectors

1,2,3,4

Power

Connection

USB

(future)

1234

DC+12V

USB

RS-232 Serial

Connection

Ethernet Cables:

Orange - Crossover

Grey - Straight-through

Null-Modem Cable

(RS-232) Documentation

Front

Power Cable Power Supply

Power LED

Status LED Interface

status LEDs

FortiGate- 30B

oolsand Documenation

Trademarks

1234

USB

CONSOLE

400B

QuickStart Guide

For more information

• Documentation CD: all major FortiMail documents

• Fortinet Technical Documentation: http://docs.fortinet.com

• Fortinet Knowledge Base: http://kb.fortinet.com

• Fortinet Technical Support: http://support.fortinet.com

• Fortinet Training Service: http://campus.training.fortinet.com

LED State Description

Power On The FortiMail unit is on.

Off The FortiMail unit is off.

Status On The FortiMail unit is running

normally.

100/1000 On Port connected at up to 100 Mbps.

Off Port connected at 10 Mbps.

Link Act

Flashing Network activities on the FortiMail

unit.

On Port connected.

Trademarks

Products mentioned in this document are trademarks or registered

trademarks of their respective holders.

Regulatory Compliance

FCC Class A Part 15, CE, and UL

Version 4.0

9 February 2010

http://www.fortinet.com

POWER

STATUS

4321

LINK / ACT

10/100

QuickStart Guide

FortiMail-100

Installation and configuration of the FortiMail unit involves the

following steps:

1. Place the unit on a stable surface.

2. Connecting the unit to the network. For details, see the

FortiMail Install Guide.

3. Powering up the unit. See instructions below.

4. Connecting to the web-based manager. See instructions

below.

5. Selecting an operation mode: Gateway, Transparent, or

Server. For details, see the FortiMail Install Guide.

6. Running the QuickStart wizard to configure the basic settings.

For details, see the FortiMail Install Guide.

7. For all other installation instructions, see the FortiMail Install

Guide on the documentation CD.

8. For all the configuration instructions, see the FortiMail

Administration Guide and the FortiMail online help.

9. If you want to use the CLI commands to configure the unit, see

the FortiMail CLI Reference on the documentation CD.

Connector Type Speed Protocol Description

Port 1 to 4 RJ-45 10/100Base-T Ethernet Connection to the network.

CONSOLE DB-9 9600 bps RS-232 serial Connection to the management computer.

Provides access to the command line interface (CLI).

Package Contents

Installation Overview

Collecting Information

Interface settings General settings

Factory default settings

Port 1: IP: ____.____.____.____

Netmask: ____.____.____.____

Port 2 IP: ____.____.____.____

Netmask: ____.____.____.____

Port 3: IP: ____.____.____.____

Netmask: ____.____.____.____

Port 4 IP: ____.____.____.____

Netmask: ____.____.____.____

Transparent

mode Management IP: ____.____.____.____

Administrator

password:

Network

Settings:

Default Gateway: ____.____.____.____

Primary DNS Server: ____.____.____.____

Secondary DNS Server: ____.____.____.____

Default mode Gateway mode

Administrator

account on Port 1

User name/

Password: admin/(No password)

Web-based

manager URL: https://192.168.1.99/admin

Management

Access HTTPS, Ping, SSH

Deploying the FortiMail unit

Now that the FortiMail unit is up and running, you can start to

deploy the unit into your network by configuring the system

settings and mail settings. The FortiMail Install Guide will help you

with this task.

Configuring the FortiMail unit

Then you can configure detailed antispam, antivirus, and logging

settings to protect your mail servers and users. For details, see

the FortiMail online help or the FortiMail Administration Guide on

the documentation CD.

The web-based manager has two display modes: Basic and

Advanced. The default mode when you first log on is Advanced.

You can switch between the two modes by clicking

Basic Mode >> or Advanced Mode >>.

In either mode, you can run the quick start configuration wizard to

configure the basic network and antispam settings. For detailed

information about the quick start wizard, see the FortiMail Install

Guide.

Configuration changes made with the web-based manager are

effective immediately.

The FortiMail unit has the operation mode: gateway, transparent,

and server. For details about operation modes and which mode

you should use, see the FortiMail Install Guide.

The default operation mode is gateway mode. You can change to

transparent mode or server mode after connecting to the unit.

Changing operation mode causes system reboot.

To connect to the web-based manager, you need:

• An Ethernet connection between the FortiMail unit and your

management computer.

• A web browser such as Firefox or Internet Explorer with Adobe

Flash Player 10 or greater plug-in.

To connect to the web-based manager for the first time

1. On your management computer, configure the Ethernet port

with the static IP address 192.168.1.2 and a netmask of

255.255.255.0.

2. Using the Ethernet cable, connect you computer’s Ethernet

port to the FortiMail unit’s port 1.

Use a cross-over Ethernet cable to connect the devices

directly. Use straight-through Ethernet cables to connect the

devices through a hub or switch.

3. Start your web browser and go to https://192.168.1.99/admin

(include the “s” in https:// and “/admin” after the IP address).

4. Type

admin

in the Name field and select Login.

5. Go to Monitor > System Status > Status (the dashboard) to

set the operation mode. The system will reboot.

6. Log on to the system again.

7. Click Quick Start Wizard to run the quick start configuration

wizard and follow the steps to configure the system’s basic

network and antispam settings.

You can use one of the following tools to configure the FortiMail unit. If you are connecting and using the unit for the first time, it is

recommended you use the web-based manager only, because it comes with a quick start configuration wizard which can guide you

through the initial setup.

• Web-based manager

The web-based manager is an easy-to-use management tool that you can access from a web browser.

• Command Line Interface (CLI)

The FortiMail unit has a console port and you can use a console cable to connect it directly to your management computer. For

information about CLI commands, see the FortiMail CLI Reference on the documentation CD.

Powering On

Next Steps

To power on the FortiMail unit

1. Ensure the unit is placed on a stable surface.

2. Ensure the power is not connection.

3. Connect the network cable to port 1.

4. Connect the power cable.

Straight-through Ethernet cable connects

to hub or switch on the network.

Power cable connects

to power supply.

1234

DC+12V

USB

Optional null modem cable connects to

serial port on management computer.

Using the web-based manager

Configuration Tool Overview

Otros manuales para FortiMail-100

Otros manuales de Hardware de red de Fortinet

Fortinet

Fortinet FortiManager 400G Manual de usuario

Fortinet

Fortinet FortiDB-400B Manual de usuario

Fortinet

Fortinet FortiGate 100F Series Manual de usuario

Fortinet

Fortinet FortiSIEM 2000G Manual de usuario

Fortinet

Fortinet FortiDB FortiDB-2000B Manual de usuario

Fortinet

Fortinet FortiController FortiController-5208 Manual de lista de piezas

Fortinet

Fortinet Rugged 70F Series Manual de usuario

Fortinet

Fortinet Wireless Starter Kit Manual de usuario

Fortinet

Fortinet FortiGate-5000 Manual de usuario

Fortinet

Fortinet FortiLog-100 Manual de instrucciones

Fortinet

Fortinet FortiGate 80F Series Manual de usuario

Fortinet

Fortinet FortiAnalyzer 3700G Manual de usuario

Fortinet

Fortinet FortiGate 3000F Series Manual de usuario

Fortinet

Fortinet FortiManager 1000C Manual de usuario

Fortinet

Fortinet FortiGate 4800F Series Manual de usuario

Fortinet

Fortinet FortiGate 3240C-DC Manual de usuario

Fortinet

Fortinet FortiAP 431G Manual de usuario

Fortinet

Fortinet 3000B Manual de usuario

Fortinet

Fortinet FortiGate-7000F Series Manual de lista de piezas

Fortinet

Fortinet FortiSwitch 1024E Series Manual de usuario

Fortinet

Fortinet FortiWAN 1000E Manual de usuario

Fortinet

Fortinet FortiNAC-CA-500F Manual de usuario

Fortinet

Fortinet FortiRecorder 7.0.0 Manual de instrucciones

Fortinet

Fortinet FortiBalancer 2000 Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario