2
2.3 Hazardousenvironmentandmedia:
The product has to be protected from hazardous environment and check to ensure that no
hazardousliquidsorgasespassthroughtheproduct.
2.4 Depressurizingofsystemsandnormalizingoftemperature:
Ensure isolation and safety venting of any pressure to the atmospheric pressure. Even if the
pressure gauge indicates zero, do not make an assumption that the system has been
depressurized.
Toavoiddangerofburnsallowtemperaturetonormalizeafterisolation.
2.5 Toolsandconsumables:
Ensure you have appropriate tools and / or consumables available before starting the work.
UseoforiginalForbesMarshallreplacementpartsisrecommended.
2.6 Protectiveclothing:
Consider for the requirement of any protective clothing for you/ or others in the vicinity for
protection against hazards of temperature (high or low), chemicals, radiation, dangers to
eyesandface,noiseandfallingobjects.
2.7 Permitstowork:
All work to be carried out under supervision of a competent person. Training should be
imparted to operating personnel on correct usage of product as per Installation and
Maintenance instruction. “Permit to work” to be complied with (wherever applicable), in
case of absence of this system a responsible person should have complete information and
knowledgeon whatwork isgoingonandwhererequired,arrangetohaveanassistantwith
his primary goal and responsibility being safety. “Warning Notices” should be posted
wherevernecessary.
2.8 Handling:
There is a risk of injury if heavy products are handled manually. Analyze the risk and use
appropriatehandling method by taking into consideration the task, individual, the working
environmentandtheload.
2.9 Freezing:
Provision should be made to protect systems which are not self-draining, against frost
damage(inenvironmentwheretheymaybe exposedtotemperaturesbelowfreezingpoint)
tobemade.
2.10 Returningproducts:
CustomersandStockistareremindedthat,whenreturningproductstoForbesMarshallthey
must provide information on any hazards and the precautions to be taken due to
contamination residues or mechanical damage which may present a health, safety or
environmentalrisk.
This information must be provided in writing including Health and Safety data sheets
relatingtoanysubstancesidentifiedashazardousorpotentiallyhazardous.
Forbes Marshall Pilot Operated Pressure ReducingValve
