Fookoo DY101 Instrucciones de funcionamiento
Fookoo HD Wired 10" Backup Camera System
(DY101)
Installation and Operation Guide
I
PLEASE NOTE:
Before operating this backup system, please read these
instructions completely.
We recommend that you retain this guide with the system as a
ready reference.
If you have any questions, or if you require technical support,
please contact us at this email address: Huangiem@yahoo.com
We will respond with 24-hours to provide you with the support
you require.
Please record our email for future refence, if needed.
If you encounter the following:
1. When opened, it is found to be defective or missing parts;
2. You don’t like it when you received;
3. Need technical support and help during the installation process;
4. Camera or monitor gets accident during use;
5. You order a wrong item;
6. Any other after-sales problems that need help.
Please contact us in time, we will provide you with the best service
and technical support, and solve the problems.
II
TABLE OF CONTENTS
1 WHATS IN THE PACKAGE.........................................................................１
2 SAFETY PRECAUTIONS.............................................................................２
3 SYSTEM DESCRIPTION............................................................................. ２
3.1 Monitor.......................................................................................... ２
3.2 Camera...........................................................................................５
3.3 Camera Cable.................................................................................５
3.4 Remote Control.............................................................................. ６
4 SYSTEM INSTALLATION............................................................................６
4.1 Take the Time to Make an Installation Plan.................................. ６
4.2 Suggested System Installation Sequence...................................... ７
5 SYSTEM OPERATION............................................................................１２
5.1 Read before use......................................................................... １３
5.2 Movie Mode Panel.....................................................................１３
5.3 Still Capture Panel......................................................................１５
5.4 Clock Settings Panel...................................................................１５
5.5 Media Tool Panel....................................................................... １６
5.6 General Settings Panel...............................................................１６
5.7 Language................................................................................... １８
6 Troubleshooting.................................................................................. １８
7 Warranty............................................................................................. ２０
１
1 WHATS IN THE PACKAGE
Congratulations! Our Fookoo back-up camera system will provide many
years of reliable service, because our monitors, cameras and cables are of
the highest quality. Please examine the shipping box to see if there are
any signs of rough handling. Unpack the box carefully and verify that
each item shows no signs of shipping damage. The image below provides
an overview of all of the items that are part of this system. If any parts
appear damaged or are missing, please contact us at the email address
listed on the cover page.
２
2 SAFETY PRECAUTIONS
To operate properly, this back-up system requires the monitor to be
connected to a 9-36 Volt Direct Current power source (Current limited
1.2A). To avoid an electric shock injury or damage to the system, we
recommend that a qualified technician with appropriate training and
experience be obtained to perform this critical connection. A wiring
diagram to make this connection is provided below at paragraph 4.2.2.
3 SYSTEM DESCRIPTION
3.1 Monitor
①SD Card Placement
⑦SEL Button (On/Off Recording)
②Sunshade (Unremovable)
⑧Camera/Channel Switch Button
③Function Increase Button
⑨Power ON/OFF Button
④Menu Button
⑩Monitor Harness Connector
⑤Function Discrease Button
⑪Red Tag
⑥Power Indicator Light
⑫Screen Protective Film
３
3.1.1 Red Tag
There is a protective film on the screen, it is used to remove it. Please be
careful to remove.
3.1.2 SD Card Access Port
An SD card access port is located on the top right side of the monitor. The
SD card is the primary storage device on the monitor, onto which camera
video imagery is captured. You just need to press the memory card hard
and it will pop out or get stuck in. The monitor contains a 32GB SD Card.
(Supports 32-128GB SD card.)
3.1.3 Monitor and Harness Cables
The monitor has a 8-pin cable connector attached to it. This connector is
connected to a power cord harness which in turn connects to all of the
cameras and any activated trigger wire connections.
3.1.4 Monitor Buttons
（1）UP+: Function Increase Button
No effect on the main interface.
In the menu state, press it to select between these 6 menu options.
In the parameter, press it to increase, for example, if the “Brightness”
control is selected, press this button can increase the brightness of the
screen. To indicate this increase, a series of bars light up at the bottom of
the screen.
（2）MENU: Monitor System Menu Button
Press this button to enter menu settings.
When under menu/other options’ state, press it can exit and back to
previous panel.
４
（3）DOWN-: Function Decrease Button
No effect on the main interface.
In the menu state, press it to select between these 6 menu options.
In the parameter, press it to discrease, for example, if the “Brightness”
control is selected, press this button can decrease the brightness of the
screen. To indicate this decrease, a series of bars light up at the bottom of
the screen.
（4）CH-: Monitor Channel Selection Button
As illustrated above, this button allows the user to select various camera
screen displays.
Pressing the button repeatedly cycles each camera channel display
one-by-one, and then it begins to display a series of two camera channels
grouped on the screen. These single and multiple display options provide
the user with great viewing flexibility.
Before installing the cameras, it is important to decide which cameras
will be connected to which channel numbers, so that when the channel
selections are made, the screen will display the ideal grouping of channels.
The individual channel numbers are marked on each of the camera
connectors on the harness cables.
*The split mode can be changed via the Split Setting of menu. You can
choose other mode according to your need.
（5）SEL Button
Movie Mode
Still Capture
Clock Settings
General Settings
Language
Media Tool
Press it to enter menu
panel; press it one more
can exit the panel.
MENU
AHD1
AHD2
AHD1
AHD1
AHD1
AHD2
AHD2
AHD2
５
In the main interface: you can press the SEL button to turn on/off
recording(if you have SD card inside the system).
In the options of menu: you can press it to confirm selection. Such as, if
you want to adjust brightness, you need to: press MENU to enter menu
setting - press UP+ / DOWN- to choose “Movie Mode” option - and then
press SEL button to confirm and enter “Movie Mode” option - under
Movie Mode setting, press UP+/DOWN- to select the options - if you
confirm it, please press SEL to enter. (Press MENU button can return to
the previous panel)
（6）POWER: Power ON/OFF Button
When this button is pressed once the monitor powers-on. The next time
this button is pressed the monitor powers-off.
3.2 Camera
This camera has a weather resistant stainless-steel
housing that is ideally suited for exterior
all-weather use. It is rated IPK69K which means it
is completely waterproof. It can withstand
temperatures from -40 < +1980 Fahrenheit. It has a
six-layer all-glass lens that delivers crystal-clear
imagery. The camera comes equipped
with an adjustable flat mount base. You
can adjust the lock-screws on the sides of
the camera to adjust the lens of camera
with a small Phillips screwdriver. A short
4-pin aviation video cable is attached to
the body of the camera.
And it cludes a upgrade bracket for it, you
can change it as your need.
3.3 Camera Cable
One 4-pin aviation style cable are supplied with the
system. It is 50 feet (15 meters) long. A male
６
connector is fitted at one end and a female connector is fitted at the other
end. This arrangement enables each cable to connect to the camera at one
end and the monitor harness at the other end.
3.4 Remote Control
The system is equipped with a remote control, the remote control is
equipped with electronics, only need to unplug the transparent plastic
sheet at the bottom, you can use it.
①POWER
Turn on or off monitor
②Video SELECT
Channel switch
③MENU
Enter in menu setting
④MODE SELECT
Start/stop video, take photos,
menu selection
⑤◀
DOWN-, Reduce when in setting
page
⑥▶
UP+, Increase when in setting
page
4 SYSTEM INSTALLATION
The system components are designed to be assembled without difficulty
and with simple tools.
4.1 Take the Time to Make an Installation Plan
We recommend that that you make plan before you begin the installation
of your system components. This approach will eliminate the likelihood
of running into problems with cable routing, camera mount locations and
power supply.
⑤
①
⑥
②
④
③
７
4.2 Suggested System Installation Sequence
Based on our experience, we recommend that you follow this installation
sequence:
Assemble Installation Tools
Install the Monitor
Connect the Power Supply
Connect the Trigger Wire(s)
Install the Cable
Install the Camera
Connect the Camera Cable to the Monitor
Test and Calibrate the System
Adjust the Camera View
Secure the Camera Cable
4.2.1 Install the Monitor
The monitor is delivered with a metal U-shaped bracket and a Fan-shaped
bracket.
U-shaped Bracket Installation:
Fan-shaped Bracket Installation:
Tabla de contenidos
