15
2. Why does the display read “bAtt”?
Battery is running low. Replace the batteries.
3. The message displays “Err 0”.
,QLWLDO]HURLVWRRODUJH&KHFNLIWKHSODWIRUPLVHPSW\,IQRWSOHDVHUHPRYHWKHZHLJKWRII
the platform.
4. The message displays “Err 2” when measuring.
2YHUORDGZDUQLQJ5HPRYHWKHZHLJKWLPPHGLDWHO\RWKHUZLVHSHUPDQHQWGDPDJHWR
the scale will occur.
5. Why can’t I hold the weight?
&KHFNZKHWKHU\RXUZHLJKWLVVWDEOH,IQRWSOHDVHZDLWXQWLO³67$´LFRQLVVKRZQRQ
screen, and then press [HOLD] again.
6.The message displays “Err 3” when estimating body fat and body water values.
&RQWDFWHUURU,PSHGDQFHFDQQRWEHPHDVXUHG3OHDVHPDNHVXUHWKDW\RXDUHVWDQGLQJVWLOORQ
the scale and maintaining maximum contact between your feet and the metal contacts. Please
refer to section “Operation”. You may need to moisten your feet to improve the electrical
contact.
7. The message displays “Err 4” when estimating body fat and body water values.
Estimated body fat percentage is beyond the technical limit. Moistening your feet may
help to improve the electrical contact.
8. The message displays “Err 5” when estimating body fat and body water values.
Percentage total body water body water is out of range. Moistening your feet may help to
improve the electrical contact.
9. The message displays “Err6”.
Machine error. Please contact your sales representative.
10.The message displays “---.-” when replay.
8QVXFFHVVIXO%0,RU%)$RSHUDWLRQ)ROORZUHODWHG%0,PHDVXULQJRU%)$
estimating operation to complete your measurement.
11.The message displays “uStb” when measuring.
8QVWDEOH]HUR6WHSRIIWKHVFDOHWKHQVWHSRQWKHVFDOHDJDLQ
12.After I tried the corrective actions, I still can’t solve the problem .
If problem persists after following the corrective actions, remove batteries and reinsert
batteries after 1 minute.
13.The message displays “Adc”.
Machine error. Please contact your sales representative.
14.The message displays “EEP”.
Machine error. Please contact your sales representative.
15. The message displays "N.A".
Without height rod.
16. I have tried all corrective actions, but still can’t solve the problem.
Please contact your sales representative.
PROBLEM-SOLVING
1. No weight displayed.
&KHFNLIWKHVFDOHLVSRZHUHGXSDQGVWDUWHGXS,IQRWSOHDVHUHIHUWRWKHVHFWLRQ
“PREPARATION BEFORE USE”.
5. Follow steps 6-8 in the section of BODY FAT AND TOTAL BODY WATER ESTIMATING
OPERATION.
B.To Recall Settings from Memory
1. Press [MODE@NH\DOOGLJLWV)LJDQGVRIWZDUHYHUVLRQ)LJZLOOEHVKRZQRQ/&'
VXFFHVVLYHO\WKHQ³E0,´ZLOOEHGLVSOD\HGRQ/&')LJ3UHVV>MODE] key twice and
³PHP´ZLOOEHGLVSOD\HGRQ/&')LJ
3UHVV>@WRFRQ¿UPDQGLWZLOOHQWHULQWRPHPRU\UHFDOOPRGH³0´ZLWKODVWPHPRUL]HG
ORFDWLRQZLOOEOLQN)LJ3UHVV>Ÿ@>ź@WRVHOHFWPHPRU\ORFDWLRQ3UHVV>@WR
FRQ¿UPWKHPHPRU\ORFDWLRQ
,IWKHPHPRU\LVHPSW\³´ZLOOEHGLVSOD\HG)LJ3UHVV>Ÿ@>ź@WRVHOHFWDQRWKHU
memory location.
,IWKHPHPRU\LVRFFXSLHGPHPRUL]HG,'1RDQG%)$SDUDPHWHUVKHLJKWDJHJHQGHU
QRUPDORUDWKOHWHVHOHFWLRQZLOOEHWRJJOHGRQVFUHHQ3UHVV>@WRFRQ¿UPDQG³R´ZLOO
cyclic show on screen.
5. Follow steps 6-8 in the section of BODY FAT AND TOTAL BODY WATER ESTIMATING
OPERATION.
REPLAY MEASURED DATA FROM MEMORY
3UHVV>@NH\DOOGLJLWV)LJDQGVRIWZDUHYHUVLRQ)LJZLOOEHVKRZQRQ/&'
VXFFHVVLYHO\WKHQ³0´ZLWKODVWPHPRUL]HGORFDWLRQZLOOEHEOLQNLQJ)LJ
3UHVV>Ÿ@RU>ź@WRVHOHFWPHPRU\ORFDWLRQ3UHVV>@WRFRQ¿UP
,IWKHPHPRU\ORFDWLRQLVHPSW\³´ZLOOGLVSOD\)LJ3UHVV>Ÿ@RU>ź@WRVHOHFW
another memory location.
,IWKHPHPRU\ORFDWLRQLVRFFXSLHGWKH,'1RDQGPHPRUL]HGSHUVRQDOGDWDRI%0,
parameters (height) or BFA parameters (age, gender, normal/athlete, height) and the last
%0,RU%)$UHVXOWVZLOOEHVKRZQRQ/&'
CIMPORTANT NOTICE TO USERS
ƔThe screen will show “---.-” if no results or unsuccessful estimation is recorded in the memory.
CIMPORTANT NOTICE TO USERS
Ɣ'RQRWVWHSRQWKHVFDOHXQWLO³NJ´ZLWK³67$´LQGLFDWLRQVKRZVRQVFUHHQ