Follett Horizon Elite HCD1410R Manual de usuario

Horizon Elite 1010/1410 Ice Machines (Remote Condensing) 1

Horizon Elite™ 1010/1410 Ice Machines

(Remote Condensing)

User Guide

Please visit www.follettice.com/technicaldocuments

for the Operation and Service manual for your unit.

Installation and Service Videos:

www.follettice.com/servicevideolibrary

01252592R02

801 Church Lane • Easton, PA 18040, USA

Toll free (877) 612-5086 • +1 (610) 252-7301

www.follettice.com

Welcome to Follett

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding

after-the-sale support. To ensure that this equipment delivers that same degree of service, review this guide

carefully before you begin your installation.

Should you need technical help, please call our Technical Service group at (877) 612-5086 or (610) 252-7301.

Please have your model number, serial number and complete and detailed explanation of the problem when

contacting Technical Service.

Getting Started

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. All freight

is to be inspected upon delivery. If visible signs of damage exist, please refuse delivery or sign your delivery receipt

"damaged." Follett Customer Service must be notied within 48 hours. Wherever possible, please include detailed

photos of the damage with the original packaging so that we may start the freight claim process.

HCD1010R/N, HCD1410R/N,

HMD1010R/N, HMD1410R/N,

HCF1010R/N, HCF1410R/N,

HMF1010R/N, HMF1410R/N

2 Horizon Elite 1010/1410 Ice Machines (Remote Condensing)

CAUTION

• Warranty does not cover exterior or outside installations.

• Moving parts. Do not operate with front cover removed.

• Hot parts. Do not operate with cover removed.

• To reduce risk of shock, disconnect power before servicing.

• Drain line must not be vented.

• Water supply must have particle ltration.

• Most ice machine cleaners contain citric or phosphoric acid, which can cause skin irritation. Read caution label

on product and follow instructions carefully.

• Ice is slippery. Maintain counters and oors around dispenser in a clean and ice-free condition.

• Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.

Specications

Electrical

Separate circuit and equipment ground required.

Evaporator unit

Standard electrical: 115/60/1

Maximum fuse: 15A

Amperage: 5A

Condensing unit

1010

Single-Phase

(Tecumseh)

1010

3-Phase

(Tecumseh)

1410

Single-Phase

(Tecumseh)

1410

3-Phase

(Tecumseh)

1410

3-Phase

(Larkin

LZT015M6CFIM)

1410

3-Phase

(Larkin

LCH0015MCACZ)

Electrical 208-230 V,

60 Hz

208-230 V,

60 Hz

208-230 V,

60 Hz

208-230 V,

60 Hz

208-230 V,

60 Hz

208-230 V,

60 Hz

Max Circuit

HVACR breaker

size

15A 15A 30A 25A 15A 20A

Min Circuit

Ampacity

10.7A 9.9A 19.3A 14.2A 15A 15A

Evaporator plumbing

§3/8" OD push-in water inlet (connection inside machine) - 3/8" OD tubing required.

§Water shut-off recommended within 10 feet (3 m).

§Follett recommends installation of Follett water lter system (part# 00130286) in ice machine inlet water line.

Horizon Elite 1010/1410 Ice Machines (Remote Condensing) 3

Flush drain plumbing

§3/4" MPT ush drain connection at the rear of the machine.

§Drain must slope 1/4" inch per foot (6 mm per 30.4 cm).

§Drain line should not be shared with any other piece of equipment.

§Drain line cannot be reduced to a size smaller than 1 inch.

§Drain should be piped without a vent.

3/4" barb x 3/4" FPT

1" Stand pipe/Drain

2 ft. x 1" OD

silicone tubing

Minimum 8"

radius

3/4" MPT x 1" slip

1" PVC Drain

2 ft. x 1" OD

silicone tubing 3/4" MPT x 1" slip

3/4" barb x 3/4" FPT

1/4" per foot

(6,4 mm per 0,3 m)

Chassis drain plumbing

§Plug must be removed from John Guest tting.

§Route 3/8" drain tubing through knockout in back of docking station and insert fully into John Guest tting

connection at the rear of the machine chassis. Route other end of 3/8" drain tubing to drain.

§Drain must slope 1/4" inch per foot (6 mm per 30.4 cm).

4 Horizon Elite 1010/1410 Ice Machines (Remote Condensing)

Ambient

Evaporator unit

Air temperature 100 F/38 C max. 50 F/10 C min.

Water temperature 90 F/32 C max. 45 F/7 C min.

Water pressure 70 psi max. (483 kPa) 10 psi min. (69 kPa)

Condenser unit

Air temperature 120 F/49 C max. –20F/–29C min.

Refrigeration

§3/8" liquid line

§5/8" suction line

Note: Rack system installations require a capacity of 10,000 BTU/hr for 1010 machines and 13,000 BTU/hr for

1410 machines at 0 F (–18 C) evaporator temperature. Evaporator pressure regulator (not supplied) is

required.

Weight

Evaporator unit: 125 lbs (57 kg)

Condensing unit:

Horizon Elite 1010 series Horizon Elite 1410 series

Approximate ship weight 260 lb (118 kg) 270 lb (122 kg) – single phase (Tecumseh)

230 lb (104 kg) – three phase (Larkin)

Approximate net weight 250 lb (114 kg) 260 lb (118 kg) – single phase (Tecumseh)

210 lb (95 kg) – three phase (Larkin)

Ice production

1010 ice machine capacity/24 hrs.

Ambient Air Temperature F/C

Evap Potable Water Temperature F/C

F 60 70 80 90 100

C16 21 27 32 38

50 1051 978 906 834 763 lbs

10 477 444 411 379 346 kg

60 994 925 855 796 737 lbs

16 451 420 388 361 335 kg

70 937 871 805 758 711 lbs

21 425 395 365 344 323 kg

80 904 839 774 727 680 lbs

27 410 381 351 330 309 kg

90 872 807 743 696 648 lbs

32 396 366 337 316 294 kg

1410 ice machine capacity/24 hrs.

Ambient Air Temperature F/C

Evap Potable Water Temperature F/C

F 60 70 80 90 100

C16 21 27 32 38

50 1474 1372 1269 1212 115 4 lbs

10 669 623 576 550 524 kg

60 1385 1292 119 8 1148 1097 lbs

16 628 586 544 521 498 kg

70 1296 1212 112 7 1083 1039 lbs

21 588 550 5 11 492 472 kg

80 1239 115 5 1072 1030 988 lbs

27 562 524 487 468 449 kg

90 90 118 1 1099 1017 976 lbs

32 32 536 499 462 425 kg

Horizon Elite 1010/1410 Ice Machines (Remote Condensing) 5

Dimensions and clearances

§Entire front of ice machine must be clear of obstructions/connections to allow removal.

§1" (26 mm) clearance above ice machine for service.

§1" (26 mm) minimum clearance on sides.

§The intake and exhaust air grilles must provide at least 250 sq in (1615 sq cm) of open area.

§Air-cooled ice machines – 18" (458 mm) minimum clearance between discharge and air intake-grilles.

A 21.26" (54.0 cm)

B21.11" (53.6 cm)

C23.77" (60.4 cm)

D2.66" (6.8 cm)

E19.59" (49.8 cm)

F16.00" (40.6 cm)

G2.73" (6.9 cm)

H2.28" (15.3 cm)

I6.04" (5.8 cm)

J22.00" (55.9 cm)

K22.69" (57.6 cm)

C (1410 ONLY)

D (1410 ONLY)

NEMA 5-15

RIGHT ANGLE

1410 ONLY

6 Horizon Elite 1010/1410 Ice Machines (Remote Condensing)

Condensing unit

1010/1410 single phase (Tecumseh)

1010 three phase (Tecumseh)

1410 three phase (Larkin)

Horizon Elite 1010 series Horizon Elite 1410 series

W1 Width 36.25" (91.4 cm) – all models 36.25" (90.1 cm) – single phase (Tecumseh)

37.75" (95.9 cm) – three phase (Larkin)

D1 Depth 25.50" (64.8 cm) – all models 25.50" (64.8 cm) – single phase (Tecumseh)

28.25" (71.6 cm) – three phase (Larkin)

H1 Height 26.10" (66.3 cm) – all models 26.10" (66.3 cm) – single phase

19.75" (50.2 cm) – three phase (Larkin)

Electrical single phase – 208-230/60/1

three phase – 208-230/60/3

single phase – 208-230/60/1 (Tecumseh)

three phase – 208-230/60/3 (Larkin)

Operating power single phase – 2.4 kW

three phase – 2.2 kW

single phase – 4.2 kW (Tecumseh)

three phase – 3.0 kW (Larkin)

Minimum circuit ampacity single phase – 10.7 A

three phase – 9.9 A

single phase – 19.3 A (Tecumseh)

three phase – 15 A (Larkin)

Maximum overcurrent protection single phase – 15 A

three phase – 15 A

single phase – 30 A (Tecumseh)

three phase – 15 A (Larkin)

Outdoor condensing unit operating limits

(air temperature)

min -20 F (-29 C)

max 120 F (49 C)

min -20 F (-29 C)

max 120 F (49 C)

Maximum refrigerant line run length 100' (30.5 m) 100' (30.5 m)

Maximum line rise above evaporator 35' (10.7 m) 35' (10.7 m)

Evaporator mounting above condenser 15' (4.6 m) 15' (4.6 m)

Maximum refrigeration line drop without oil trap 15' (4.6 m) 15' (4.6 m)

Refrigerant charge 12.5 lb required at installation 12.5 lb – single phase (Tecumseh)

10 lb – three phase (Larkin)

required at installation

Approximate ship weight 260 lb (118 kg) 270 lb (122 kg) – single phase (Tecumseh)

230 lb (104 kg) – three phase (Larkin)

Approximate net weight 250 lb (114 kg) 260 lb (118 kg) – single phase (Tecumseh)

210 lb (95 kg) – three phase (Larkin)

NOTE:

1. The entire liquid line should be insulated separately from the suction line.

Horizon Elite 1010/1410 Ice Machines (Remote Condensing) 7

Operation

Cleaning/sanitizing and preventive maintenance (all models)

Note: Do not use bleach to sanitize or clean the icemaker.

Preventive maintenance

Periodic cleaning of Follett’s icemaker system is required to ensure peak performance and delivery of clean,

sanitary ice. The recommended cleaning procedures that follow should be performed at least as frequently as

recommended, and more often if environmental conditions dictate.

Cleaning of the condenser can usually be performed by facility personnel. Cleaning of the icemaker system,

in most cases, should be performed by your facility’s maintenance staff or a Follett authorized service agent.

Regardless of who performs the cleaning, it is the operator’s responsibility to see that this cleaning is performed

according to the schedule below. Service problems resulting from lack of preventive maintenance will not be

covered under the Follett warranty.

Weekly exterior care

The exterior may be cleaned with a stainless cleaner such as 3M Stainless Steel Cleaner & Polish or equivalent.

Monthly condenser cleaning (air-cooled icemaker only)

1. Use a vacuum cleaner or stiff brush to carefully clean condenser coils of air-cooled icemakers to ensure

optimal performance.

2. When reinstalling counter panels in front of remote icemakers, be sure that ventilation louvers line up with

condenser air duct.

Semi-annual evaporator cleaning (every 6 months)

WARNING

• Wear rubber gloves and safety goggles (and/or face shield) when handling ice machine cleaner or sanitizer.

CAUTION

• Use only Follett approved SafeCLEAN Plus™ cleaning solution.

• DO NOT USE BLEACH.

• It is a violation of federal law to use these solutions in a manner inconsistent with their labeling.

• Read and understand all labels printed on packaging before use.

Note: Complete procedure for cleaning an sanitizing MUST be followed. Ice must be collected for 10minutes

before putting ice machine back into service.

Fig. 1

1. Press the CLEAN button. The machine will drain. The

auger will run for a short time and then stop. Wait for

the LOW WATER light to come on. LO WATER

8 Horizon Elite 1010/1410 Ice Machines (Remote Condensing)

Fig. 2

2. Follow the directions on the SafeCLEAN Plus

packaging to mix 1 gal. (3.8 L) of Follett SafeCLEAN

Plus solution. Use 100 F (38 C) water.

3. Using a 1 quart (1L) container, slowly ll cleaning cup

until CLEANER FULL light comes on. Do not overll.

4. Place one SaniSponge™ cleaning sponge in

remaining sanitizing and cleaning solution and retain

for Step 9.

Note: Do not use bleach to sanitize or clean the icemaker.

CLEANER FULL

Fig. 3

5. Replace cover on cleaner cup. Machine will clean,

then ush 3 times in approximately 15 minutes. Wait

until machine restarts.

Fig. 4

6. To clean/sanitize ice transport tube – Press power

switch OFF

Horizon Elite 1010/1410 Ice Machines (Remote Condensing) 9

Fig. 5

7. Disconnect coupling as shown.

Fig. 6

8. Using disposable foodservice grade gloves, insert dry

SaniSponge cleaning sponge.

9. Insert SaniSponge cleaning sponge soaked in

SafeClean Plus (from Step 4).

10. Push both SaniSponge cleaning sponges down ice

transport tube with supplied pusher tube. 1

16"

(407 mm)

Fig. 7

11. Remove and discard 16 inch (407 mm) pusher tube.

10 Horizon Elite 1010/1410 Ice Machines (Remote Condensing)

Fig. 8

12. Reconnect coupling. Press power switch ON. Ice

pushes SaniSponge cleaning sponges through ice

transport tube.

Fig. 9

13. Place a sanitary (2 gal. or larger) container in bin or

dispenser to collect SaniSponge cleaning sponges

and ice for 10 minutes.

14. Collect 5.5 lbs (3 kg) of ice from unit. Discard ice and

SaniSponge cleaning sponges.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Máquina de hielo de Follett

Follett

Follett HMF1000R Manual de operación

Follett

Follett Horizon Elite Manual de servicio

Follett

Follett Tempo UCD100A30-NF Manual de operación

Follett

Follett 110 Series Suplemento

Follett

Follett HCC1000AHS Manual de usuario

Follett

Follett Horizon Elite Chewblet HCD1010RBT Manual de usuario

Follett

Follett HCC1400A Manual de operación

Follett

Follett HCE1400A Manual de operación

Follett

Follett Horizon Elite HMF1810RJS Manual de usuario

Follett

Follett Horizon Elite series Manual de usuario

Follett

Follett HCE1000A Manual de operación

Follett

Follett Horizon Elite HCD1810RBS Manual de usuario

Follett

Follett Horizon Chewblet 710 Series Manual de usuario

Follett

Follett Horizon Elite HCD710APS Manual de usuario

Follett

Follett H_C700AHS Manual de usuario

Follett

Follett Symphony 25HI400A Suplemento

Follett

Follett 7FS100A Guía de configuración

Follett

Follett Symphony 12 Series Guía de configuración

Follett

Follett MCD425A Guía de configuración

Follett

Follett Maestro Manual de usuario

Follett

Follett Horizon Elite Chewblet 1010 Series Manual de usuario

Follett

Follett T400A Guía de configuración

Follett

Follett MC825 Series Guía de configuración

Follett

Follett 25CI425A Guía de configuración

Manuales populares de Máquina de hielo de otras marcas

Hoshizaki

Hoshizaki KMD-460MWJ Manual de usuario

Sub-Zero

Sub-Zero 315I Instrucciones de uso

Unold

Unold 48945 Manual de usuario

Kenmore

Kenmore 2217402A Manual de usuario

Cornelius

Cornelius WM600 Instrucciones de funcionamiento

GE XPIO43SCSS Manual de usuario

Hoshizaki

Hoshizaki KMD-901MAH Manual de usuario

Whynter

Whynter FIM-450HA Manual de usuario

U-Line

U-Line UMCR014-SC01A Manual de instalación

Andrew James

Andrew James AJ000522 Manual de usuario

Scotsman

Scotsman CME1356 Manual de usuario

Scotsman

Scotsman ACM 25 Manual de usuario

Kärcher

Kärcher IP 120 Manual de usuario

U-Line

U-Line SS1095 Manual de usuario

Maytag

Maytag MIM1554WRS - Ice Maker Manual de usuario

Hoshizaki

Hoshizaki KM-630MAH Manual de usuario

Princess

Princess Yonanas Manual de usuario

Unold

Unold 48946 Manual de usuario