FOAOOD DF220 Manual de usuario
User Manual
Security Camera Wireless Outdoor
DF220
1
13
25
37
49
Menu
English
Deutsch
Français
Italiano
Español
After-Sale Support
Dear friends
Thank you very much for supporting FOAOOD
Please read this manual thoroughly before using this wireless security camera. If you have
Receiving your message, we will provide a fast solution in 24 hours.
Please do not worry. Actually, many problems can be easily solved by setting, such as
Networking Connection Falls, Motion Detection Delay, Solar Panel Charging. False Alarm,
Battery Management etc. We promise all the cameras have been carefully checked and
packaged before shipping.
BTW, we offer the lifetime technical support for your camera. and are happy to provide all
possible support for you. If you have any questions or ambiguities during using, please feel
free to contact us. We will try to find a good solution with our professional camera
engineers.
Warm Regards.
FOAOOD Service Team
1
Note:
·The camera only supports 2.4GHz WIFI. It does not support 5GHz WIFI.
·Before connecting this camera to the WIFI, please ensure the WIFI signal strength is to be
over than 85%, If the camera is far away from the signal source, it won't be connected
successfully for the first time.
·If your router is connected with too many devices, the camera will fail to connect Wi-Fi
because of the IP address conflict.
·To safeguard your privacy, this camera just supports CloudPlus control. It does not support
PC Browser and other Software.
·This wireless camera supports events recording when Wi-Fi disconnected.
Video playback works in CloudPlus APP only. It does not support the 3rd party player.
·Manually snapshot and recording files are saved in mobile. Events snapshot files are saved
in Cloud. Events recording files are saved in Micro SD card.
·It will speed up the power consumption of the battery if you always watch the live footage
or the recorded videos from the SD card. Please charging the camera timely based on the
low power reminder. (Before using the camera for the first time, please fully charge the
camera with the power cord in the package).
2
Product Introduction
LED Status Description
The Blue light is normally on : the camera is fully charged .
The Red light is normally on : the camera is charging.
The Red light is normally on : The camera is on or the internet has problem.
The Red light flickers : Waiting for WiFi connection(flicker slowly), Connected WiFi (flicker
quickly).
The Blue light is normally on : the camera is connecting to network.
The Blue light flickers : the camera is on line and the user can view the video.
Cannot turn on my camera?
·Charge the camera, and then try to turn on it.
·Press and hold the power key until turning on the camera. (can try many times)
·If you tried the above steps, but still no luck, please message your order and problem to
Charging indicator
Lens
IR and White
Speaker
Wall Mount Hole
USB Charge Port
TF card slot
Working Status
Indicator
PIR
Microphone
Power Key
(Press power key
over 5 seconds till
the indicator flashing
slowly in red) RESET
(Press Reset
button 5
seconds for the
device restores
the factory
setting)
3
APP Installation and Account Registration
Download ' CloudPlus' APP
Method 1: Download ' CloudPlus' APP from APP Store (iOS) or Google Play(Android):
Method 2: Scan ' CloudPlus' APP QR code to download it.
Register Account
New users need to register by email. The concrete steps are as following:
1) Click "Register":
2) Follow the steps to complete the registration of the account;
3) Log in.
Note:
·When registering a new account, please choose the region which you are actually in and
correct country code. (Different registered regions can't share the camera.)
·Please choose to register by e-mail.
4
Download on
the App Store
Get it on
Google Play
Note:
·Put the camera and smart phone I to 3 feet (30 to 100cm) away from the router to set Wi-Fi.
·The camera only supports 2.4GHz Wi-Fi. It doesn't support 5GHz WIFI.
5
Tips: Please turn on 2 below permissions
while using this APP for the first time.
1. Allow ' CloudPlus ' APP to access
mobile cellular data and wireless LAN or
it will fail to add IP camera.
2. Allow ' CloudPlus ' APP to receive
pushed message or the phone will not
receive alarm push when motion
detection or audible alarm is triggered.
Connect the Camera
Router
30cm-100cm Smartphone
WI-FI Connection Steps
A. Turn on the camera
B. Press and hold the reset button for 5 seconds to reset or restore factory until
you hear the sound of "Boogu"(mean resetting successfully);
C. Run CloudPlus App, click "+"at the top right and select "Battery Camera".
According to the guide on APP, please ensure the camera was activated. (The LED
indicator light is turning red and flickering slowly);
D. Choose 2.4GHz Wi-Fi SSID and enter the password, and then click the "next step";
E. Click the "OK" to make sure the Wi-Fi information;
F. After entering the following operation interface, please click "Next"and you will see the
"Scan QR Code"interface.
G. Put the QR code in front of the camera lens about 10-15cm. The device lens is aimed at
the QR code on the phone screen with a distance of 10-15cm. After the device recognizes
the QR code, the camera will make a sound Boogu. After heard it, please click ' next",
H. Then, the camera will start connecting Wi-Fi. After the connection finished, it will skip to
' Device Found' page, you could edit the camera name and click ' Done' and then go to
your device list and start viewing videos.
6
About 10-15cm
My camera fails to connect WIFI?
1. Please make sure the Wi-Fi the camera connected is 2.4GHz. In our experience, network
connection is failed in most cases, which is caused by that users used 5GHz WIFI.
2. Make sure the password correction of the Wi-Fi. (Note: the password of the WIFI cannot
include single quote, underline, space and virgule (/).
3. Check the number of the devices your router connected. In general, the router has a
connection limits. Once the devices that your router connected excess the its max limit
numbers, other devices will cannot connect the router
4. Make sure the QR code on the phone screen is normal and the distance between the
phone and the camera lens is 10-15cm (3.9-5.9inch) during the scanning process.
5. After checking the above information, if the camera cannot connect the Wi-Fi, please try
to re-download the APP, reset the camera and restart the router, and then add the camera
again.
6. If you tried all steps, but still no luck, please message your order and problem to
What should I do if the charge fails?
1. Determine whether the power adapter is good, try another one.
2. Determine whether the USB charging cable is good, try another one
3. The charging indicator may be defective, please check the charging
condition in the phone APP
4. Determine whether the charging port of the device is not in good contact
with the USB charging cable.
5. The device has a low temperature charging protection module, please
don't charge the device at low temperatures.
7
Battery life
If the device does not detect a moving object, the device will enter sleep mode, reducing
the power consumption of the device.
If the device detects a moving object, it quickly wakes up and starts within 1 second and
takes screenshot with recorded video.
Warm fip: When the temperature is below-20°C, the battery may enter self-
protection mode, which caused the camera automatically be shut down. But if the
temperature rises, the battery will automatically return to normal state.
At the low temperatures, if you need to charge this camera, please place it onhome several
hours first. In room temperature, the self-protection mode of the battery will automatically
be shut off to charge this camera safely.
Why the battery life of my device is poor?
A. Please check whether the number of alarms is too frequent. Because the working time of
the device determines the battery life. The more frequent PIR wake-ups, the faster the
battery consume due to the longer working time. It is recommended to appropriately lower
the motion detection sensitivity of the device and set the alarm interval and alarm time
plan. (Note: Outdoor air conditioning units, moving cars and the passing pedestrians will
cause frequent alarms. Please adjust the angle of the device to avoid these objects.)
B. In cold weather, the battery capacity will be reduced, which will affect the endurance of
the device.
8
Tabla de contenidos
Idiomas:
