FMUser FSN-301 Manual de usuario

Contact: Rita Cai Email: rita@fmuser.net Web: www.fmuser.net skype: rita.cai87

FSN-301 30W 1U FM

Transmitter

User Manual

Contact: Rita Cai Email: rita@fmuser.net Web: www.fmuser.net skype: rita.cai87

Outstanding Features:

l0~30W power adjustable

lDual reverb microphone input port

lExternal encoder input (for external SCAor RDS encoder)

lVSWR protection, and can set the start value of the standing wave protection.

lOver-temperature protection, can set the start value of over temperature protection.

lControllable fan forced cooling system, ensure stability and also increase the

working life of the fan

lAutomatic volume control function. Input volume can be detected and adjusted

automatically to ensure the best modulation.

l4 commonly used function keys, easy and fast to set the parameters of the machine.

Technical parameters:

* Power supply：AC100V~240V/50Hz/60Hz

* Working Frequency：87~108MHz（OEM 76~92MHz）

* Frequency stabilization method: PLL

* Frequency step: 0.1MHz

* Modulation way: WFM

* Power ouput：0~30W adjustable, maximum 30W

* Output Impedence:50Ω/Coaxial

* Stray radiation:<-60db

*Audio level: 15dbV

* Frequency Response:50~15KHz

* SNR：70db

* Separation：40db

* Temperature：0~45℃

Contact: Rita Cai Email: rita@fmuser.net Web: www.fmuser.net skype: rita.cai87

The detailed look into the PCB

Contact: Rita Cai Email: rita@fmuser.net Web: www.fmuser.net skype: rita.cai87

Operation Attentions:

1. Make sure the antenna or the Load can be ground connected to transmitter

2. The power supply voltage must be within the allowed range.

3. Make sure the fan ventilation is good.

Operation step:

1. Power on

2. Function and Parameter setting

1) Frequency setting

2) Line volume setting

3) Power setting

4) Audio mode setting

5) Temperature protection setting

6) VSWR protection setting

7) Microphone volume setting

8) Shorcut:

There are 4 shortcut button for easier and fasting parameter setting:

FREQ：Frequency setting

LINE：Line Volume setting

RF-PWR：Power setting

MIC：Microphone Volume setting

Operation Instruction:

1. Attention for POWER ON/OFF:

lMake sure the antenna or RF load is properly connected to the transmitter

lMake sure the supplied voltage is within allowed range.

lMake sure ventilation is good.

2. POWER ON。

Press the power button to “I” to turn on the power. “O” means POWER OFF. See

picture below:

Contact: Rita Cai Email: rita@fmuser.net Web: www.fmuser.net skype: rita.cai87

After POWER ON, the interface showing working status. There will be two

pages to show the parameters:

Page1:

Page2:

Page1 shows:

lWorking frequency

lActual internal temperature

lPower output

lReflected Power:

lVSWR：。

Page2 shows:

lAudio mode：， ST means Stereo, MO means Mono.

lLine Volume：, volume value is 0~12，AUTO

mean automatic volume control.

lMicrophone volume：，volume range is 0~79.

lVolume bar: , it shows the strength of

volume.

lTo change between page 1 and page 2, press the switch.

3. Function and parameter setting:

lPress the switch, you will see the menu. Turn the rotary switch, there will be

altogether 8 items rotating displaying on the screen.

Contact: Rita Cai Email: rita@fmuser.net Web: www.fmuser.net skype: rita.cai87

lFrequency setting.

When you see the mune page, switch to the first item”FREQ”. press the switch

to confirm, then the system will go to frequency setting page(power

forwarding will be temporarily closed), see picture below:：

Now, turn the switch to set the frequency you need, it will step on by

0.1MHZ. After setting, press the switch to confirm and exit.

lLine volume setting:

On the menu page, turn the rotary switch to select the second item “LINE

VOLUME”, press the switch to confirm, now you can set the volume.

Turn the switch to set the line volume, the range is from 0-79. After setting,

press the switch to confirm and exit.

lPower setting

On the menu page, turn the rotary switch to select the thrid item”POWER

SET”, then press the switch to confirm, now you can set the power:

Turn the switch to set the power output, the range is from 0-30watt. After

setting press the switch to confirm and exit.

lAudio mode setting:

On the menu page, turn the rotary switch to select thefourth item “STEREO

OR MONO”, press the switch to confirm. Now you can change the audio

mode:

Turn the switch fo set the mode, there are two modes: STEREO, MONO.

After setting, press the switch to confirm and exit.

Contact: Rita Cai Email: rita@fmuser.net Web: www.fmuser.net skype: rita.cai87

lTemperature protection setting:

On the menu page, turn the rotary swtich to selet the fifth item “TMPE

SET”, press the switch to confirm. Now you can set the temperature

protecton:

Turn the switch to set the temperature you want to protect the machine

from burned, the available range is from 50-70℃. After setting, press the

switch to confirm and exit.

lVSWR setting:

On the menu page, turn the rotary switch to selet the sixth item “SWR SET”,

then press the switch to confirm. Now you can set the SWR.

Turn the switch to set the SWR value, the available range is 1.5-3.5, after

setting, press the swtich to confirm and exit.

lMicrophone volume setting:

On the munu page, turn the rotary switch to choose item7 “MIC VOLUME”,

then press the switch to confirm. Now you can adjust the volume:

Turn the switch to adjust the microphone volume, the available range is

0-79. After setting, press the switch to confirm and exit.

3. Shorcut buttons:

lThere are 4 shortcut buttons on the controlling panel:

FREQ：Frequency set LINE：Line volume set

RF-PWR：Power output set MIC：Microphone volume set

Tabla de contenidos

Otros manuales de Transmisor de FMUser

FMUser

FMUser ST-1A Manual de usuario

FMUser

FMUser CZH-T200 Manual de usuario

FMUser

FMUser FU-25A Manual de usuario

FMUser

FMUser cze-01a Manual de usuario

FMUser

FMUser SDA-01A Manual de usuario

FMUser

FMUser CZH-T200 Manual de usuario

FMUser

FMUser PureFM-880 Manual de usuario

FMUser

FMUser CZH-T251 Manual de usuario

FMUser

FMUser FU-300W Manual de usuario

FMUser

FMUser CZH-05A V1.2 Manual de usuario

FMUser

FMUser CZH-T200 Manual de usuario

FMUser

FMUser CZH-T200 Manual de usuario

FMUser

FMUser CZH-T200 Manual de usuario

FMUser

FMUser CZH-T501 Manual de usuario

FMUser

FMUser 500W Manual de usuario

FMUser

FMUser CZH618F-1000C Manual de usuario

FMUser

FMUser ST-2815FM Manual de usuario

FMUser

FMUser ST-15M Manual de usuario

FMUser

FMUser FU-X01 Manual de usuario

FMUser

FMUser FSN-5 LPFM Series Manual de usuario

FMUser

FMUser SDA-15B Manual técnico

FMUser

FMUser CZH-10A Manual de usuario

FMUser

FMUser FU-25A Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario