Fluke 56X Manual de usuario
PN 3833028
December 2010
©2010 Fluke Corporation. All rights reserved. Printed in China.
Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
56x
Infrared
Thermometers
Getting Started
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and work-
manship for two years from the date of purchase. This warranty
does not cover fuses, disposable batteries, or damage from acci-
dent, neglect, misuse, alteration, contamination, or abnormal condi-
tions of operation or handling. Resellers are not authorized to ex-
tend any other warranty on Fluke’s behalf. To obtain service during
the warranty period, contact your nearest Fluke authorized service
center to obtain return authorization information, then send the
product to that Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WAR-
RANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE,
ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR
ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR
THEORY. Since some states or countries do not allow the exclusion
or limitation of an implied warranty or of incidental or consequential
damages, this limitation of liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99
i
Table of Contents
Title Page
Introduction....................................................... 1
Safety Information ............................................ 1
Using the Thermometer.................................... 5
Changing Batteries........................................... 5
Cable Connections (568 Only) ......................... 6
561 Display....................................................... 6
566/568 Menu Overview .................................. 8
Specifications Summary................................... 10
56x
Infrared Thermometers
ii
1
Infrared Thermometers
Introduction
The 561, 566 and 568 Infrared Thermometers (“the
Thermometers” or “the Product”) are for non-contact
temperature measurement. These Thermometers determine an
object’s surface temperature by measuring the amount of
infrared energy radiated by the object’s surface. The
Thermometers also support contact-temperature measurement
via K-type thermocouple.
Note that the Japanese models indicate Celsius only.
Safety Information
A Warning identifies conditions and actions that pose hazard(s)
to the user; A Caution identifies conditions and procedures that
could cause Product damage, equipment under test damage, or
permanent loss of data.
Symbols used on the Product and in this manual are explained
in Table 1 and Figures 1 and 2.
56x
Getting Started
2
*WWarning
To prevent eye damage and personal injury:
•Read all safety Information before you use
the Product.
•Do not look directly into the laser with optical
tools (for example, binoculars, telescopes,
microscopes). Optical tools can focus the
laser and be dangerous to the eye.
•Do not look into the laser. Do not point laser
directly at persons or animals or indirectly off
reflective surfaces.
•Do not use laser viewing glasses as laser
protection glasses. Laser viewing glasses are
used only for better visibility of the laser in
bright light.
•Do not open the Product. The laser beam is
dangerous to eyes. Have the Product
repaired only through an approved technical
site.
•Replace the batteries when the low battery
indicator shows to prevent incorrect
measurements.
•The battery door must be closed and locked
before you operate the Product.
•Do not use the Product if it operates
incorrectly.
•Do not use the Product around explosive gas,
vapor, or in damp or wet environments.
Infrared Thermometers
Safety Information
3
•Do not connect the optional external probe to
live electrical circuits.
•See emissivity information for actual
temperatures. Reflective objects result in
lower than actual temperature
measurements. These objects pose a burn
hazard.
•Do not leave the Product on or near objects
of high temperature.
•Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous
laser radiation exposure.
•Use the Product only as specified, or the
protection supplied by the Product can be
compromised.
WCaution
To avoid damaging the Product or the equipment
under test, protect them from the following:
•EMF (electro-magnetic fields) from arc
welders, induction heaters, etc.
•Static electricity
•Thermal shock (caused by large or abrupt
ambient temperature changes- for highest
accuracy, allow 30 minutes for Product to
stabilize before use).
56x
Getting Started
4
AVOID EXPOSURE - LASER RADIATION
IS EMITTED FROM THIS APERTURE
CAUTION
LASER RADIATION - DO NOT STARE INTO BEAM
OUTPUT <1mW WAVELENGTH 630 - 670nm
CLASS 2 (II)LASER PRODUCT
COMPLIES WITH FDA 21CFR
1040.10 AND 1040.11
COMPLIES WITH IEC 60825
AVOID EXPOSURE - LASER RADIATION
IS EMITTED FROM THIS APERTURE
CAUTION
LASER RADIATION - DO NOT STARE INTO BEAM
OUTPUT <1mW WAVELENGTH 630 - 670nm
CLASS 2 (II)LASER PRODUCT
COMPLIES WITH FDA 21CFR
1040.10 AND 1040.11
COMPLIES WITH IEC 60825
Laser
Aperture
efh010f.eps
Figure 1. 561 Laser Safety Markings
Laser
Aperture
ewm08b.eps
Figure 2. 566/568 Laser Safety Markings
Infrared Thermometers
Using the Thermometer
5
Using the Thermometer
To take a temperature reading, point the Thermometer at the
desired object and pull the trigger. You can use the laser pointer
to help aim the Thermometer. You may also insert the K-type
thermocouple probe for contact measurement.
Changing Batteries
To change the batteries, see Figure 3.
AA
(+)
ewm04.eps
Figure 3. Changing Batteries (566/568 is shown)
56x
Getting Started
6
Cable Connections (568 Only)
To connect the USB and Thermocouple to the 568, see Figure 4.
ewm05.eps
Figure 4. Connecting the K-Type Thermocouple, USB Cable
(568 Only)
Note
To prevent incorrect readings, do not perform a
temperature measurement of an earthed conductor while
the 568 is connected to a PC that is earthed by a three-
phase grounding plug.
561 Display
The primary temperature display reports the current or last IR
temperature read until the 7-second hold time elapses.
The secondary temperature display reports current
thermocouple temperature when a type-K thermocouple is
attached. See Figure 5.
Otros manuales para 56X
1
Tabla de contenidos
Otros manuales de Termómetro de Fluke
Fluke
Fluke 566 Manual de usuario
Fluke
Fluke VT04 Manual de usuario
Fluke
Fluke 561 HVACPro Manual de usuario
Fluke
Fluke 1551A Ex Manual de uso y cuidado
Fluke
Fluke 51 Manual de usuario
Fluke
Fluke 1521 Manual de usuario
Fluke
Fluke 561 HVACPro Manual de instrucciones
Fluke
Fluke 62 MAX Manual de usuario
Fluke
Fluke 561 HVACPro Manual de usuario
Fluke
Fluke 62 MAX Manual de usuario
Fluke
Fluke 61 Manual de instrucciones
Fluke
Fluke 1560 Black Stack Manual de usuario
Fluke
Fluke 1504 Manual de usuario
Fluke
Fluke 572-2 Manual de usuario
Fluke
Fluke Hart Scientific 1523 Manual de usuario
Fluke
Fluke Fluke-61 Manual de usuario
Fluke
Fluke 62 MAX Manual de usuario
Fluke
Fluke 65 Manual de usuario
Fluke
Fluke 5624 Manual de usuario
Fluke
Fluke 572-2 Manual de usuario
