Fluke ScopeMeter 192B Manual

Fluke 192B, Fluke 196B, Fluke 199B, Fluke 192C, Fluke 196C, Fluke 199C, Fluke 215C, Fluke 225C SOMV 1 of 2 4/8/2011

Instrument Security Procedures

Model:

Fluke 192B, Fluke 196B, Fluke 199B, Fluke 192C, Fluke 196C, Fluke 199C,

Fluke 215C, Fluke 225C

Product Name:

190B and 190C Series ScopeMeter

Instrument Description:

High-performance Oscilloscopes

Memory Description:

The 190B/C series ScopeMeter Test Tools have the following memory devices:

1. D3500 Controller “Spider”. This contains a mask ROM 4kx32 with a initial

program with the operating code for the product and a RAM 1kx32 to

temporarily store stack values for computing actions.

2. D3502 SRAM 512k x 8 or 256k x 16 - SRAM memory to store:

•the actual screen and instrument setup

•saved screens and instrument setups

3. D3503 SRAM 512k x 8 - SRAM memory to store:

•the actual screen and instrument setup

•saved screens and instrument setups

4. A201 module with the following memory devices:

•D101, D202 : 1M x 16 Flash EEPROM or D101, D202 : 512k x

16 Flash EEPROM.

Non-volatile memory used to store operating code (instrument

firmware) for the product, and to store calibration constants.

•D201, D202 : 256k x 16 SRAM - SRAM memory to store:

- the actual screen and instrument setup

- saved screens and instrument setups

Fluke 192B, Fluke 196B, Fluke 199B, Fluke 192C, Fluke 196C, Fluke 199C, Fluke 215C, Fluke 225C SOMV 2 of 2 4/8/2011

Security Summary:

The operating code (instrument firmware) stored in D101-D102 on the A201

module can be read using special remote interface commands. The instrument

firmware can be loaded using a dedicated Fluke software program.

Calibration constants stored in D101-D102 on the A201 module can be read

using special remote interface commands. The calibration constants are

generated when the meter is sent through its calibration process and are

fundamental to the test tool operation.

Memory Cleaning Instructions:

The procedure to clear all saved screens and instrument set-ups differs per the

firmware version held in the ScopeMeter Test Tool. The version can be read by

pressing ‘USER’, then ‘F3 = VERSION & CAL’.

Firmware releases up to and

including V6.xx Firmware release V7.00 and beyond

1. Press the SAVE_PRINT button

2. Push the softkey F1 = SAVE

3. Push the softkey F3 = DELETE ALL

4. Press the softkey F4 = YES

1. Press the USER key

2. Press F1 = OPTIONS

3. Move the cursor to the field ‘Factory

Default’

4. Press F4 = ENTER to confirm this

selection

5. Press F4 = YES

The effectiveness of either of these procedures can be verified by checking the

status of the memories:

1. Press the SAVE_PRINT button

2. Press F1 = SAVE

The memory contents will show as ‘0 memory locations used’ or with all memory

number fields unfilled, confirming that all memories have been erased as

intended.

For all instrument versions mentioned and independent of the firmware release

that is installed, the test tool will also lose all data stored in SRAM in case the

instrument is not powered through its Power Adapter/Battery Charger and the

battery is removed for 10 minutes or longer.

Otros manuales para ScopeMeter 192B

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Fluke

Fluke

Fluke 820-2 Manual de usuario

Fluke

Fluke 1AC II VoltAlert Manual de usuario

Fluke

Fluke CombiScope PM3370B Manual de usuario

Fluke

Fluke 5700A Series Manual de usuario

Fluke

Fluke PRV240FS Manual de usuario

Fluke

Fluke 9011 Manual de usuario

Fluke

Fluke FTK100 Manual de usuario

Fluke

Fluke i400 Manual de uso y cuidado

Fluke

Fluke CableIQ Manual de usuario

Fluke

Fluke CableIQ Manual de usuario

Fluke

Fluke 5730A Manual de usuario

Fluke

Fluke 9500B Manual de instrucciones

Fluke

Fluke MicroScanner Series Manual de usuario

Fluke

Fluke ULT800 Manual de usuario

Fluke

Fluke 2000ACC Manual de usuario

Fluke

Fluke CertiFiber Manual de usuario

Fluke

Fluke 717-1000G Manual de instrucciones

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Fluke

Fluke 3130 Manual de usuario

Fluke

Fluke Network Device MedTester 5000C Manual de usuario

Fluke

Fluke 3130-G2M Manual de usuario

Fluke

Fluke 709 Manual de uso y cuidado

Fluke

Fluke OMNIScanner 2 Manual de usuario

Fluke

Fluke DTX-PCU6S Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manual de usuario