Fluke CableAnalyzer DSP-4000 Series Manual de usuario
DSP-4000 Series
CableAnalyzer
Getting Started Guide
July 2001, Rev. 1, 5/03
© 2001-2003 Fluke Corporation. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
Accessing the Users Manual
The DSP-4000 Series Users Manual is available on the DSP-4000 Series
Manual CD included with your test tool.
Contacting Fluke Networks
Visit the Fluke Networksweb site at www.flukenetworks.com. Send
email to support@flukenetworks.com.
To order accessories or get the location of the nearest Fluke Networks
distributor or service center, call:
•USA: 1-888-99-FLUKE (1-888-993-5853)
•Canada: 1-800-363-5853
•Europe: +44 1923 281 300
•Beijing: 010-65123435
•Japan: +81-3-3434-0181
•Singapore: +65-6738-5655
•Anywhere in the world: +1-425-446-4519
For operating assistance in the USA, call 1-800-283-5853.
i
Table of Contents
Title Page
Introduction....................................................................................................................1
Registration....................................................................................................................1
Standard Accessories.................................................................................................... 2
Safety and Operational Information............................................................................... 3
Main Unit Features ........................................................................................................ 6
Remote Features........................................................................................................... 9
Permanent Link Interface Adapters (DSP-4000PL/4300)............................................. 12
Setting Up the Test Tool................................................................................................ 13
Powering the Test Tool............................................................................................. 13
Turning On the Test Tool.......................................................................................... 14
Selecting a Language............................................................................................... 14
Quick Configuration .................................................................................................. 14
Using the Link Interface Adapters............................................................................. 16
Checking the Memory............................................................................................... 17
Formatting the Memory Card (DSP-4100/4300) ....................................................... 17
ii
Setting Up Cable IDs................................................................................................. 17
Auto Increment ..................................................................................................... 17
Auto Sequence..................................................................................................... 17
Selecting a List of Downloaded IDs (DSP-4300).................................................. 18
Testing Cabling .............................................................................................................. 18
Diagnosing Cabling Problems........................................................................................ 18
Saving Autotest Results................................................................................................. 19
DSP-4000.................................................................................................................. 19
DSP-4100/4300......................................................................................................... 19
Calibrating the Test Tool................................................................................................ 19
Getting Software Upgrades............................................................................................ 19
1
DSP-4000 Series CableAnalyzers
Introduction
The Fluke Networks DSP-4000 Series CableAnalyzers™
(hereafter referred to as “the test tool”) are hand-held
instruments used to certify, test, and troubleshoot coaxial
and twisted pair cabling in local area network (LAN)
installations. The test tool combines test pulses with
digital signal processing to provide fast, accurate results
and advanced testing capabilities up to 350 MHz.
Registration
Registering your product with Fluke Networks gives you
access to valuable information on product updates,
troubleshooting tips, and other support services. To
register, fill out and return the postage-paid card
provided, or fill out the online registration form on the
Fluke Networks website.
DSP-4000 Series
Getting Started Guide
2
Standard Accessories
A DSP-4000 Series test tool comes with the following
accessories. If the test tool is damaged or something is
missing, contact the place of purchase immediately.
•1 DSP-4000SR, DSP-4100SR, or DSP-4300SR
remote unit
•The following link interface adapters:
◊With the DSP-4000 and DSP-4100: 2
DSP-LIA011 Basic Link Adapters for Cat 5E and
2 DSP-LIA012 Channel Adapters for Cat 6
◊With the DSP-4000PL: 2 DSP-LIA101
Permanent Link Adapters for Cat 6 and 2
DSP-LIA012 Channel Adapters for Cat 6
◊With the DSP-4300: 2 DSP-LIA101 Permanent
Link Adapters for Cat 6, 1 DSP-LIA012 Channel
Adapter for Cat 6, and 1 DSP-LIA013
Channel/Traffic Adapter for Cat 6
•2 AC adapter/chargers 120 V (US only) or universal
adapter/chargers and line cords (outside North
America)
•1 Memory card reader (DSP-4100, DSP-4300)
•1 16 MB memory card (DSP-4100, DSP-4300)
•1 Memory card carrying case (DSP-4100, DSP-4300)
•2 NiMH battery packs (installed)
•2 Headsets
•1 DSP-4000 Calibration Module
•1 RJ45 to BNC adapter
•1 PC serial interface (EIA-232C) cable
•2 Carrying straps
•1 LinkWaresoftware CD
•1 DSP-4000 Series Manual CD (includes complete
users manual)
•1 DSP-4000 Series Getting Started Guide
•1 Warranty registration card
•1 Soft carrying case
If you purchased optional Fiber Test Adapters, refer to the
Fiber Test Adapter users manual for a list of fiber
accessories.
Safety and Operational Information
3
Safety and Operational Information
The international electrical symbols used on the
instrument or in this manual are described in Table 1.
Table 1. International Electrical Symbols
Warning: Risk of electric shock.
Warning or Caution: Risk of damage or
destruction to equipment or software. See
explanations in the manual.
Equipment is protected by double insulation
or reinforced insulation to protect the user
against electric shock.
Do not connect this terminal to public
communications networks, such as
telephone systems.
Warning
To avoid possible fire, electric shock,
personal injury, or damage to the test tool
•If this product is used in a manner not
specified by the manufacturer, the protection
provided by the product may be impaired.
•Use only the ac adapter/charger provided
with the test tool (PN 106200 or 944223) to
charge the battery or power the test tool.
•Never connect the test tool to any telephony
inputs, systems, or equipment, including
ISDN. Doing so is a misapplication of this
product, which can result in damage to the
test tool and create a potential shock hazard
to the user.
DSP-4000 Series
Getting Started Guide
4
•Never connect the CABLE TEST input to any
LAN inputs, systems, or equipment. Doing so
is a misapplication of this product, which can
result in damage to the test tool and create a
potential shock hazard to the user.
•Always turn on the test tool before
connecting it to a cable. Turning the test tool
on activates the tool’s input protection
circuitry.
•When servicing the test tool, use only
specified replacement parts.
•Do not use the test tool if it operates
abnormally. Protection may be impaired.
•Do not use the test tool if it is damaged.
Inspect the test tool before use.
Caution
To avoid disrupting network operation and to
ensure maximum accuracy of test results
•Except when monitoring network activity,
never connect the test tool to an active
network. Doing so may disrupt network
operation.
•Never attempt to insert any connector other
than an RJ45 connector into the RJ45 jack.
Inserting other connectors, such as RJ11
(telephone) connectors, can permanently
damage the jack.
•Never attempt to send data from a PC to the
test tool while running a cable test. Doing so
might cause erroneous test results.
Safety and Operational Information
5
•Never operate portable transmitting devices
during a cable test. Doing so might cause
erroneous test results.
•When using the channel/traffic link interface
adapter (DSP-LIA013), never run tests with
cables connected to both the cable jack and
the monitor jack. Doing so might cause
erroneous test results.
•To ensure maximum accuracy of test results,
perform the self-calibration procedure as
described in “Calibrating the Test Tool”in
Chapter 6 of the Users Manual every 30 days.
•To avoid false test results, recharge the
battery as soon as the low battery message
appears.
•If your test tool includes the DSP-LIA101
Permanent Link Adapters, see “Permanent
Link Interface Adapters”for important
handling information.
DSP-4000 Series
Getting Started Guide
6
Main Unit Features
OFF
PRINT
MONITOR
SETUP
SPECIAL
FUNCTIONS
SINGLE
TEST
AUTO
TEST
TALK
EXIT
ENTER
TEST SAVE
1234
FAULT
INFO
DSP-4100/4300
Side Plate
DSP-4000 Side Plate
5
43
2
1
10
11
8
9
7
613
18
17
14
15
16
12
ank05f.eps
Figure 1. Main Unit Features
Otros manuales para CableAnalyzer DSP-4000 Series
1
Este manual sirve para los siguientes modelos
7
Tabla de contenidos
Otros manuales de Instrumento de medición de Fluke
Fluke
Fluke 317 Manual de usuario
Fluke
Fluke 9140 Manual de usuario
Fluke
Fluke 434-II Guía de configuración
Fluke
Fluke 930 Manual de usuario
Fluke
Fluke VR101 Manual de usuario
Fluke
Fluke 941 Manual de usuario
Fluke
Fluke FOM Manual de usuario
Fluke
Fluke 433 Manual de usuario
Fluke
Fluke i430-Flexi-TF Manual de usuario
Fluke
Fluke 3000 FC Manual de usuario
Fluke
Fluke 321 Manual técnico
Fluke
Fluke 5820A Manual de usuario
Fluke
Fluke 1623-2 Manual de usuario
Fluke
Fluke VT Plus HF Manual de usuario
Fluke
Fluke 381 Manual de usuario
Fluke
Fluke 365 Manual de uso y cuidado
Fluke
Fluke OptiView Manual de usuario
Fluke
Fluke DTX Series Manual de usuario
Fluke
Fluke 714 Manual de usuario
Fluke
Fluke 732C Guía de configuración
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario