Fluke 700G01 Manual de usuario
November 2011 Rev. 1, 10/13
© 2011-2013 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
700G Series
Pressure Gauge
Users Manual
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for three years from the date of purchase. This
warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf.
To obtain service during the warranty period, contact your nearest Fluke authorized service center to obtain return
authorization information, then send the product to that Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries
do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of
liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Eu
r
ope B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99
i
Table of Contents
Title Page
Introduction .................................................................................................................... 1
How to Contact Fluke..................................................................................................... 1
Standard Equipment....................................................................................................... 2
Safety Information.......................................................................................................... 2
Hazard Location Information/Approvals..................................................................... 3
Special Conditions for Safe Use................................................................................ 3
Symbols..................................................................................................................... 4
Display and Buttons ....................................................................................................... 5
Operation ....................................................................................................................... 7
How to Setup the Product.......................................................................................... 7
Engineering Units ................................................................................................. 7
Set Auto Off.......................................................................................................... 7
Show Battery Voltage........................................................................................... 7
Display Actual Temperature ................................................................................. 7
Set Damping......................................................................................................... 7
700G Series
Users Manual
ii
Set Sample Rate.................................................................................................. 8
Set Tare ............................................................................................................... 8
Function Lock....................................................................................................... 8
Supervisory Mode..................................................................................................... 8
Available Pressure Ranges....................................................................................... 9
How to Set a Custom Engineering Unit or Scale....................................................... 9
Battery Life .................................................................................................................... 9
Maintenance.................................................................................................................. 10
How to Clean the Product......................................................................................... 10
How to Change the Batteries.................................................................................... 10
Accessories................................................................................................................... 11
RS-232 Interface....................................................................................................... 11
Specifications ................................................................................................................ 12
Available Input Ranges............................................................................................. 12
Accuracy 700G Ranges............................................................................................ 12
Accuracy 700RG Ranges ......................................................................................... 12
Media Compatibility................................................................................................... 13
Environmental........................................................................................................... 13
Mechanical Specifications......................................................................................... 14
Ranges and Resolution............................................................................................. 15
iii
List of Tables
Table Title Page
1. Symbols................................................................................................................................. 4
2. Display and Buttons .............................................................................................................. 5
700G Series
Users Manual
iv
v
List of Figures
Figure Title Page
1. The Product........................................................................................................................... 5
2. Change the Batteries............................................................................................................. 11
700G Series
Users Manual
vi
1
Introduction
The 700G Series Pressure Gauges (the Product) are
high-accuracy digital pressure test gauges. Accurate to
0.05 % FS, the Products can be used as a calibration
reference, or in any application where high-accuracy
pressure measurement is required.
The Product features user-configurable functions that
include:
•Sampling rate
•Tare
•Damping
•Auto off
•Min Max
When the Product is configured, you can lock its settings
and use password protection to prevent configuration
changes.
How to Contact Fluke
To contact Fluke, call one of the following telephone
numbers:
•Technical Support USA: 1-800-44-FLUKE
(1-800-443-5853)
•Calibration/Repair USA: 1-888-99-FLUKE
(1-888-993-5853)
•Canada: 1-800-36-FLUKE (1-800-363-5853)
•Europe: +31 402-675-200
•Japan: +81-3-6714-3114
•Singapore: +65-738-5655
•Anywhere in the world: +1-425-446-5500
Or, visit Fluke’s website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual supplement,
visit http://us.fluke.com/usen/support/manuals.
700G Series
Users Manual
2
Standard Equipment
The Product ships with:
•Protective Cover
•Three AA Batteries (installed)
•NPT/metric Adapter
Safety Information
A Warning identifies conditions and procedures that are
dangerous to the user. A Caution identifies conditions
and procedures that can cause damage to the Product or
the equipment under test.
Warning
To prevent possible electrical shock, fire, or
personal injury:
•Only assemble and operate high-
pressure systems if you know the
correct safety procedures. High-pressure
liquids and gases are hazardous and the
energy from them can be released
without warning.
•Use the Product only as specified, or the
protection supplied by the Product can
be compromised.
•The battery door must be closed and
locked before you operate the Product.
•Replace the batteries when the low
battery indicator () shows to prevent
incorrect measurements.
•Do not use and disable the Product if it
is damaged.
•Read all safety Information before you
use the Product.
•Do not use the Product in damp or wet
environments.
Caution
To avoid possible damage to Product or to
equipment under test:
•If the display reads “OL” the range limit
is exceeded and the pressure source
must immediately be removed.
•Do not exceed the maximum torque
allowed. Maximum torque allowed is
13,5 Nm = 10 ftlbs.
Otros manuales para 700G01
1
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Instrumento de medición de Fluke
Fluke
Fluke IRR2-BT Manual de usuario
Fluke
Fluke 771 Manual de uso y cuidado
Fluke
Fluke DP120 Manual de usuario
Fluke
Fluke 43B Manual de usuario
Fluke
Fluke FiberInspector Pro FI-3000 Manual de usuario
Fluke
Fluke 1520 Manual de usuario
Fluke
Fluke 871A Instrucciones de funcionamiento
Fluke
Fluke FIBER OneShot Manual de usuario
Fluke
Fluke 374 FC Manual de usuario
Fluke
Fluke 360 Manual de usuario
Fluke
Fluke CO-220 Manual de usuario
Fluke
Fluke v3000 FC Manual de uso y cuidado
Fluke
Fluke i6000s Flex Series Manual de usuario
Fluke
Fluke TPS FLEX 18-TF-II Guía de configuración
Fluke
Fluke 323 Manual de usuario
Fluke
Fluke 972A Manual de usuario
Fluke
Fluke SureGrip 80PK-25 Manual de usuario
Fluke
Fluke i1000s Guía de referencia
Fluke
Fluke 9142 Manual de usuario
Fluke
Fluke 945 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario