Fluke DSP-PM11A Manual de usuario
PMxx English Instruction Sheet
Page 1
Panel dimensions: 4-1/8” x 5-1/4”
Flat Size: 12-3/8” x 5-1/4”
01/18/02
Final Version for Translation
PN 1611107 (English) April 2001, Rev. 2, 1/02
© 2001, 2002 Fluke Networks, Inc. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
PMxx
Permanent Link Module
for the DSP/OMNI-LIA101
Permanent Link Adapter
Instruction Sheet
The PMxx Permanent Link Module makes a DSP/OMNI-LIA101
Permanent Link Adapter electrically compatible with a particular
manufacturer’s jack.
Refer to the PMxx module list included for applications for this
module and other available modules. For the most recent list of
available modules, visit the Fluke Networks website at
www.flukenetworks.com.
Fluke Networks DSP-PM11A Specs
Provided by www.AAATesters.com
PMxx English Instruction Sheet
Page 2
Panel dimensions: 4-1/8” x 5-1/4”
Flat Size: 12-3/8” x 5-1/4”
01/18/02
Final Version for Translation
Handling Information
hCaution
To avoid latent or immediate damage due to
electrostatic discharge:
•Before handling a module or an adapter with no
module attached, ground yourself when possible by
touching a grounded, conductive surface.
•Always remove the adapter from the test tool before
changing the personality module.
•Always keep a personality module attached to the
adapter cable.
•Always store the personality module in its original,
static protection bag when not in use.
PMxx English Instruction Sheet
Page 3
Panel dimensions: 4-1/8” x 5-1/4”
Flat Size: 12-3/8” x 5-1/4”
01/18/02
Final Version for Translation
Installation
Attach the module to a DSP/OMNI-LIA101 adapter cable as
follows (refer to Figure 1):
1. Ground yourself by touching a grounded, conductive
surface.
2. Remove the link interface adapter from the test tool.
3. Use your fingers to unscrew the screw on the personality
module. If necessary, you can use a flat-blade screwdriver to
loosen the screw.
4. Remove the module; then store it in its original, static
protection bag.
5. Put the new module in place and tighten the screw with
your fingers.
Caution
Tighten the screw with your fingers only. Do not
overtighten. Doing so can damage the module or the
end of the cable.
PMxx English Instruction Sheet
Page 4
Panel dimensions: 4-1/8” x 5-1/4”
Flat Size: 12-3/8” x 5-1/4”
01/18/02
Final Version for Translation
Static sensitive
device
Personality
module
aen01f.eps
Figure 1. Replacing the Personality Module
Maintenance
Always store the module in its original, static protection bag
when not in use.
Clean the module case with a soft cloth dampened with water
or water and a mild soap. Do not use abrasives, solvents, or
alcohol.
PMxx English Instruction Sheet
Page 5
Panel dimensions: 4-1/8” x 5-1/4”
Flat Size: 12-3/8” x 5-1/4”
01/18/02
Final Version for Translation
Contacting Fluke Networks
Visitthe Fluke Networkswebsite atwww.flukenetworks.com.
Send email to fluke-assist@flukenetworks.com.
To order accessories or get the location of the nearest Fluke
Networks distributor or service center, call:
•USA: 1-888-993-5853
•Canada: 1-800-363-5853
•Europe: +31-402-678-200
•Japan: +81-3-3434-0181
•Singapore: +65-738-5655
•Anywhere in the world: +1-425-446-4519
For operating assistance in the USA, call 1-800-283-5853.
Specifications
Refer to the PMxx module list included for applications for this
module. Module information is also posted on the Fluke
Networkswebsiteatwww.flukenetworks.com.
PMxx English Instruction Sheet
Page 6
Panel dimensions: 4-1/8” x 5-1/4”
Flat Size: 12-3/8” x 5-1/4”
01/18/02
Final Version for Translation
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke Networks product will be free from defects at the time of
purchase. This warranty does not cover damage from accident, neglect,
misuse, alteration, contamination, or abnormal conditions of operation
or handling. Resellers are not authorized to extend any other warranty
on Fluke Networks’ behalf. To obtain service during the warranty period,
contact your nearest Fluke Networks authorized service center to obtain
return authorization information.
Fluke Networks’ warranty obligation is limited, at Fluke Networks’
option, to refund of the purchase price, or free of charge repair or
replacement of a defective product that is returned to an authorized
Fluke Networks Service Center within the warranty period.
Warranty service is available outside the United States only if product
was purchased through a Fluke Networks Authorized Sales Outlet in the
country of use or the applicable Fluke Networks international price was
paid.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES,
SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR
IMPLIED. FLUKE NETWORKS IS NOT LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM
ANY CAUSE OR THEORY. Since some states or countries do not allow the
exclusion or limitation of an implied warranty or of incidental or
consequential damages, this limitation of liability may not apply to you.
Fluke Networks, Inc.
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
3/01
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Adaptador de Fluke
Fluke
Fluke DSP-FTA420 Manual de usuario
Fluke
Fluke BC190/830 Manual de usuario
Fluke
Fluke ir3000 FC Manual de usuario
Fluke
Fluke BC190/830 Manual de usuario
Fluke
Fluke ir3000 Manual de usuario
Fluke
Fluke DSX-CHA021S Manual de usuario
Fluke
Fluke DTX-PLA002PRP Manual de usuario
Fluke
Fluke BC190/830 Manual de usuario
Fluke
Fluke BC430 Manual de usuario
Fluke
Fluke DTX-MFM2 Manual de usuario
Fluke
Fluke 17 Series Manual de usuario
Fluke
Fluke SV225 Manual de usuario
Fluke
Fluke DTX-COAX Manual de usuario
Fluke
Fluke 700BCW Manual de usuario
Fluke
Fluke DSP-FTA440S Manual de usuario
Fluke
Fluke BC500 Manual de usuario
Fluke
Fluke DIS 90 Manual de usuario
Fluke
Fluke Norma Star Point Manual del propietario
Fluke
Fluke DSX-PLA004S Manual de usuario
Fluke
Fluke ir3000 FC Manual de usuario
