FLIR MR55 Manual de usuario

QUICK START

FLIR Model MR55

Pin Moisture Meter with Bluetooth®

FLIR MR55 - QUICK START MR55-QS-en-US_AB

MR55 - QUICK START - EN

The latest versions of the detailed User Manual and Quick Start, with translations,

are located on the http://support.flir.com web site (download tab). Please read

these documents carefully before use. Register for extended warranty and product

updates at www.flir.com/testwarranty

QUICK STEPS

1. Ensure that two fresh 1.5V ‘AA’ batteries are installed in the meter’s

rear compartment.

2. Long press the Power button to switch the meter ON. The meter

automatically switches OFF after 20 minutes (APO).

3. Short press the button to select a material group 1~11 (see

Measurement Considerations section).

4. Remove the protective cap and firmly insert the test pins into the

material under test.

5. Read the moisture level in %on the meter’s large display digits.

6. Read the ambient temperature or relative humidity on the smaller

digits. Long press the button to select oF, oC, or RH display.

7. Long press the button to switch the meter’s backlight ON/OFF.

Short press the button to switch the meter’s Work Light ON/OFF.

8. To freeze/unfreeze a displayed measurement, short press the HOLD

button.

9. To transmit a held reading refer to the Bluetooth® section below.

10. Replace the protective cap after each and use caution when the sharp

pins are exposed.

11. Verify calibration using the test points in the protective cap as

described in the User Manual.

12. The micro USB port (battery compartment) allows for System

firmware and Bluetooth® firmware upgrades. See the User Manual for

details.

FLIR MR55 - QUICK START MR55-QS-en-US_AB

METER DESCRIPTION

1. Temperature / RH sensors

2. Electrode pins

3. Backlit LCD

4. Data Hold / Transmit button

5. Worklight / Backlight button

6. Power ON-OFF button

7. Material group select and

Temperature/RH button

8. Work light

9. Battery compartment lock

10. Battery/USB port compartment

Note: Protective pin cap not pictured

Note: QR code on back of meter provides website link to material group

information for wood and building materials.

FUNCTION BUTTON DESCRIPTION

Long press to power the meter ON/OFF

Short press to freeze/unfreeze displayed readings (readings

must be held before they can be transmitted via

Bluetooth®)

Long press to transmit held reading to remotely connected

device using Bluetooth®

Short press to switch work light ON/OFF

Long press to switch display backlight ON/OFF

Short press to select a material group number (1~11)

Long press to select ambient temperature or relative

humidity display on lower left of screen

FLIR MR55 - QUICK START MR55-QS-en-US_AB

DISPLAY DESCRIPTION

1. Bluetooth® icon appears when meter

is paired with remote device

2. Transmission icon appears for 3

seconds while transmitting

3. Data Hold freezes displayed reading

4. Battery status

5. Material Group Number. Refer to

User Manual for reference tables

6. Moisture reading

7. Ambient temperature or Relative Humidity display

MEASUREMENT CONSIDERATIONS

Moisture Measurement ranges:

Wood 7 ~ 99%

Building materials (Group 10) 1 ~ 99%

Building materials (Group 11) 1 ~ 35%

Moisture readings are automatically temperature compensated

When testing wood, always insert the pins perpendicular to the wood’s

fiber structure

Take a number of readings in several locations for the best

representation of the moisture present

Material Groups 1~8 are for timber; Group 9 is for plywood and

oriented strand board (OSB); Group 10 is for brick, cement screed, and

concrete; Group 11 is for cement mortar, anhydrite screed, lime

mortar, and plaster. Download the User Manual at

http://support.flir.com for complete details.

FLIR MR55 - QUICK START MR55-QS-en-US_AB

BLUETOOTH® COMMUNICATION

When connected to a remote device running the FLIR Tools™mobile app,

the MR55 (using the METERLiNK® protocol) can send readings for display on

the remote device. When connected to a compatible FLIR camera that

supports BLE (Bluetooth® Low Energy), the MR55 can send meter readings

for display on the camera. Download the FLIR Tools™mobile app from the

Google Play™Store, the Apple App store, or from here:

https://www.flir.com/products/flir-tools-app/

When successful communication between the meter and a remote

device or FLIR camera is established, the Bluetooth® icon appears

on the MR55 display.

Refer to the FLIR Tools™help utility (in the mobile app) for detailed

information regarding FLIR Tools™.

To transmit a displayed reading, first short press the MR55 HOLD

button to freeze the reading (the ‘H’ icon appears) and then long

press the button to transmit.

The transmission icon appears for 3 seconds during the

transmission of the moisture reading, material group number, and

temperature/humidity readings. Date/time stamp can be taken from

the remote device at the time of transfer.

To unfreeze the displayed reading, short press the HOLD button again

(the ‘H’ icon will switch OFF).

FLIR Test and Measurement Limited 3-Year Warranty

This product is protected by FLIR’s 3-Year Limited Warranty. Visit

www.flir.com/testwarranty to read the 3-Year Limited Warranty

document. Register your product at the website to receive a free 1-year

warranty extension.

FLIR MR55 - QUICK START MR55-QS-en-US_AB

Corporate Headquarters

FLIR Systems, Inc.

2770 SW Parkway Avenue

Wilsonville, OR 97070 USA

Telephone: +1 503-498-3547

Customer Support

Technical Support Website http://support.flir.com

Technical Support Email TMSupport@flir.com

Service and Repair Email Repai[email protected]m

Customer Support Telephone +1 855-499-3662 option 3 (toll free)

Publication Identification No.: MR55-QS

Release version: AB

Release Date: August 2018

Language: en-US

www.flir.com

Otros manuales para MR55

Tabla de contenidos

Otros manuales de Instrumento de medición de FLIR

FLIR

FLIR MR277 Manual de usuario

FLIR

FLIR EXTECH INSTRUMENTS PQ3450 Manual de usuario

FLIR

FLIR Extech Instruments MA1500 Manual de usuario

FLIR

FLIR EXTECH MA620 Manual de usuario

FLIR

FLIR MSX MR277 Manual de usuario

FLIR

FLIR Extech Instruments EN300 Manual de usuario

FLIR

FLIR VS80A4-60-2RM Manual de usuario

FLIR

FLIR CM65 Manual de usuario

FLIR

FLIR MR04 Manual de usuario

FLIR

FLIR identiFINDER R300 Manual de usuario

FLIR

FLIR ME13552 Manual de usuario

FLIR

FLIR TA72 Manual de usuario

FLIR

FLIR CM55 Manual de usuario

FLIR

FLIR VS80C10-25RM Manual de usuario

FLIR

FLIR Extech Instruments 480823 Manual de usuario

FLIR

FLIR DM284 Manual de usuario

FLIR

FLIR CM83 Manual de usuario

FLIR

FLIR MR77 Manual de usuario

FLIR

FLIR Extech Instruments EX840 Manual de usuario

FLIR

FLIR EXTECH INSTRUMENTS PQ34-12 Manual de usuario

FLIR

FLIR EXTECH SDL310 Manual de usuario

FLIR

FLIR Extech Instruments PQ34-2 Manual de usuario

FLIR

FLIR Imaging Moisture Meter Plus IGM MR176 Manual de usuario

FLIR

FLIR MR59 Manual del operador

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario