FKM FKM3016C Manual de usuario
Model No. FKM3016C
Contents
Before Use
1. Preparations before Use
2. Safety Instructions
3. Icon Explanation
4. Maintenance
Product Description
1. Part Name
2. Switches and Keys Instructions
3. LCD Display
About the Instrument
1. Overview of the Instrument
2. Technical Indicators
Operation Guide
1. Data Holding
2. Frequency / Duty Cycle Switching
3. The Maximum and Minimum Value Measurement
4. RAN Measurement
5. Function Exchange
6. REL Measurement
7. Backlight and Clamp Head Lighting
8. Auto Shutdown
9. Buzzer
10. Measurement Preparation
11. Current Measurement
12. Voltage Measurement
13. Frequency / Duty Cycle Measurement
14. Resistance Measurement
15. Diode Test
16. Continuity Test
17. Capacitance Measurement
---------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------
------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------
-------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------
--------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------
--------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
----------------------------------------------------------------------
-------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
-------------------------------------------------------------------
----------------------------------------------------
--------------------------------------------------------------------
--------------------------------------------------------
-----------------------------------------------------------
------------------------------------
-----------------------------------------------------------------------------
---------------------------------------------------------------------
---------------------------------------------------------------
------------------------------------------------------------------------
1
1
2
2
3
3
4
5
5
6
6
6
11
11
11
11
12
12
12
12
13
13
13
14
15
15
17
17
18
18
18. Temperature Measurement
Non-contact Voltage（NCV） Detection
Battery & Test Leads Replacement
1. Replace the Battery
2. Replace the Test Leads
Accessories
Disclaimer
Warranty
Contact Us
----------------------------------------------------------------
------------------------------------------------
-------------------------------------------------------
-------------------------------------------------------------------------------
-------------------------------------------------------------------------
---------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------
19
20
20
20
21
21
21
22
23
Before Use
Warning
To avoid electric shock or injury, please read the "Safety Instructions"
and all relevant parts before using this product.
In order to give full play to the functions of the instrument and ensure
safety, please read and follow this manual carefully.
This instrument strictly follows GB/T 13978-92 generic specification for digital clamp
meter, in accordance with GB4793.1-1995（IEC-61010-1, IEC-61010-2-032）electronic
measuring instruments safety requirements, and belongs to the class-two of pollution.
The voltage standard is CAT IV 600V and CAT III 1000V.
Please follow the safety instructions, ensure the safety use of the instrument.
Use and protect the item in the right condition, the instrument will be in satisfactory
service.
The user must comply with the standards of safety rules when using this instrument：
After receiving the instrument, check whether it is damaged in transportation.
If the instrument is stored or shipped under poor conditions, check and confirm
whether the instrument is damaged.
Inspect the test leads before use. Do not use them if the insulation is damaged or
metal is exposed.
Use the test leads provided with the instrument to ensure safety. If you need to
replace the test leads, please replace them of the same or similar grade.
- To protect against electric shock
- To prevent the misuse of the instrument
1. Preparations before Use
Use the instrument as described in the manual and within the correct ranges.
During measurement, do not exceed the indicated value of the protection range of
each test.
When measuring circuit, do not touch the test leads tip (the metal part).
During the measurement, if the measured voltage is higher than 60V DC or 30V AC
(RMS), keep fingers behind the finger guards at all times.
Do not attempt to measure any voltage that might exceed AC 750V between the mea-
suring terminal and the ground.
Before turning the rotary switch to change the measurement function, the test leads
should be removed from the circuit under test.
Do not measure resistance, capacitance, diode and circuit continuity when the circuit
is connected.
Under the test of current, resistance, capacitance, diode and continuity, beware to
avoid connecting the meter to the power source.
Do not measure the capacitance before the capacitor is fully discharged.
Do not operate the instrument around explosive gas, vapor, or dust.
If there is any abnormality or malfunction of the instrument, stop using it immediately.
The instrument should not be used unless the bottom shell and the battery cover are
fully fastened in place.
Do not store or use the instrument in direct sunlight, high temperature or high humid-
ity conditions.
2. Safety Instructions
3. Icon Explanation
CAT III
Important information
Can be used for dangerous live conductor
Double insulated
In line with FCC certification
Ground
In accordance with the IEC-61010-1 over-voltage
standard (installation) level III. The pollution degree 2
refers to the pulse voltage protection levels.
Product Description
Please do not attempt to open the bottom shell to adjust or repair the instrument.
Such operations can only be performed by technicians who fully understand the
instrument and the danger of electric shock.
Remove the test leads from the circuit under test before opening the bottom shell of
the instrument or the battery cover.
To avoid false readings causing electric shock, replace the battery immediately when
the instrument displays “ ” symbol.
Use a damp cloth and mild detergent to clean the instrument; do not use abrasive
detergents or solvents.
When the instrument is not in use, turn off the power and turn the switch to the
“OFF” position.
If the instrument will not be used for a long time, the battery should be taken out to
prevent damage to the instrument.
4. Maintenance
This meter is a portable professional measuring instrument with an LCD digital display
and backlight, which is convenient for users to read. The switch can be operated with
one hand for easy measurement. Together with overload protection and a low battery
indicator, it is an ideal multi-functional instrument, whether used by professionals,
factories, schools, enthusiasts, or families.
Used for AC current, AC voltage sine wave true RMS value, DC voltage, frequency, duty
cycle, resistance, capacitance measurement and continuity, diode test, temperature
measurement and non-contact voltage detection.
Auto Ranging
Data Holding
Maximum Measurement Function
Minimum Measurement Function
Peak Measuring
Surge Measurement
Auto Shutdown
Relative Measurement
1. Part Name
Current Sensing Clamp: for current measurement
Flashlight
Panel
Trigger
Function Keys (SEL)
Relative Value / Frequency / Duty Cycle Switching Key (REL/Hz%)
Auto/ Manual Range Switching Key (RAN)
LCD Display Screen
COM Terminal
INPUT Terminal (for Resistance, Capacitance, Voltage, Frequency, Diode and Continuity)
Maximum / Minimum Button (MAX/MIN)
Data Hold Switch / Backlight Button ( )
Rotary Function Switch
HOLD
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3
4
5
6
7
8
910
11
12
13
2. Switches and Keys Instructions
3. LCD Display
HOLD Key: For data holding or backlight control.
SEL Key: For function switching.
RAN Key：Switch between manual and automatic measurement functions.
REL/Hz% Key: For relative measurement / frequency measurement / duty cycle mea-
surement.
MAX/MIN Key：To switch the maximum and minimum measurement functions.
OFF：Used to turn off the meter.
INPUT Terminal: Voltage, resistance, capacitance, frequency, duty cycle, diode, conti-
nuity, temperature and other input terminals.
COM Terminal：Voltage, resistance, capacitance, frequency, duty cycle, diode, continui-
ty and temperature common terminal.
Rotary Function Switch: To select the function and range.
AC, DC
AUTO
P MAX-MIN
INRUSH
REL
H
%%
℃, ℉
AC / DC
Diode Test, Continuity Test
Automatic Range
Peak Hold
Inrush current measurement status
Relative Measurement Mode
Temperature Measuring Mode
Low Battery
Data Hold
mV, V
nF, μF, mF
A
Ω, kΩ, MΩ
Hz, kHz, MHZ
MV, V
AMPERE (CURRENT)
nF, μF, mF
Ω, KΩ, MΩ
HZ, KHZ，MHZ (FREQUENCY)
1. Overview of the Instrument
2. Technical Indicators
The instrument shall specify the period of one year, and needs to be recalibrated under
the conditions of 18 ℃ (64.4℉) ~ 28 ℃ (82.4℉) and relative humidity less than 75%.
Automatic Measurement and Manual Measurement
Overload Protection
The Maximum Voltage Allowed between the Measuring Terminal and Earth: 1000V DC or
750V AC
Working Height: Maximum 2000m
Environment Temperature: 23±5℃ (73.4±41℉）
Relative Humidity: <75%
Display: LCD
Maximum Display Value: 5999
Polar Indication: Automatic indicator, '-' indicates negative polarity
Over Range Display: ‘0L’ or ‘-0L’
Sampling Time: about 3 times / sec
Display Unit: function / power
Auto Shutdown: 15 Minutes
Power: DC current 4.5V
Battery: 1.5V AAA
Battery Under-voltage Indication:
Temperature Coefficient: lower than 0.1 × Accuracy / ℃
Operating Temperature: 18 ℃ (64.4℉）～ 28 ℃（82.4℉）
Storage Temperature: -10℃ (14℉）～ 50℃ (122℉）
The maximum size of jaw opening: about 36mm (1.4 inches)
The maximum wire diameter that can be measured by the jaw: about 26mm (1 inch)
Size: 208 × 78 × 35mm（8.2×3.1×1.2 inches）
Weight: about 240g (8.5 oz)（Including battery）
About the Instrument
Tabla de contenidos
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario