FJDynamics FJDT02SP Manual de usuario
1
FJD Spray Disinfection Robot
User Manual
Model: FJDT02SP
2
1. Statement
Copyright©2022 FJ DYNAMICS INTERNATIONAL LIMITED.
All rights reserved.
Without explicit written permission of FJ DYNAMICS INTERNATIONAL
LIMITED, no organization or individual shall copy, reproduce, transcribe,
or translate the whole or part of this manual, and shall not disseminate
it in any way (electronic, photocopying, recording, or the like) for profit.
This manual is for instructions only, and statements made herein do not
constitute a warranty of any kind.
3
2. Foreword
Thank you for choosing FJD Spray Disinfection Robot FJDT02SP. Please
read this manual carefully before using your robot, and get to know and
use it in steps according to the instructions in the manual.
4
3.Overview
This manual introduces the functional characteristics, installation and
operation methods, and precautions in the use of FJD Spray Disinfection
Robot FJDT02SP.
This manual includes the following content:
1. Safety Instructions
This part introduces the operation requirements and precautions
of the robot.
2. Application Scenarios of the Disinfection Robot
This part describes the application scenario requirements and
precautions of the robot in detail.
3. Robot Introduction
This part briefly introduces the basic functional characteristics of
the robot and details the structural information of the robot.
4. Operation Steps
This part describes how to install and use the robot.
5. Annexes
This part introduces important functions of the robot, such as
charging, voice prompt, and emergency handling, as well as
recommended types of disinfectant, description of hazardous
5
substances of the product, packing list, product maintenance,
common faults and troubleshooting methods of the robot, and
detailed technical parameters.
6. Table of Warranty Period of Main Components
Statement
6
Table of Contents
1. Statement ................................................................................................................... 2
2. Foreword..................................................................................................................... 3
3. Overview..................................................................................................................... 4
4. Safety Instructions................................................................................................... 8
5. Application Scenarios of Disinfection Robot ...............................................13
6. Robot Introduction (Understanding of the Robot)....................................15
7. Main Structure of the Robot..............................................................................16
8. Operation Steps (Use of the Robot)................................................................19
Use the Charging Pile.......................................................................................19
Add Disinfectant.................................................................................................20
Discharge Disinfectant .....................................................................................22
App Guide.............................................................................................................24
1. Pairing and Networking......................................................................24
2. Mode Description.................................................................................29
3. System Settings .....................................................................................50
9. Charging ...................................................................................................................52
10. Robot Status Indicator.......................................................................................55
11. Voice Prompt Scenarios....................................................................................56
12. Emergency Stop...................................................................................................58
13. Recommended Disinfectants..........................................................................59
14. Hazardous Substances ......................................................................................60
7
15. Packing List............................................................................................................62
16. Product Maintenance ........................................................................................63
17. Common Faults and Troubleshooting .........................................................65
18. Main Hardware Specifications........................................................................67
19. Warranty Periods of Main Components......................................................69
8
4. Safety Instructions
Requirements for the Operator
1. The operator must be trained and provided with specialized protective
clothing.
Operating Environment
1. While using the robot, keep it away from people, plants, and animals
for protection against disinfectant spray.
2. Only use the wheeled robot in indoor environments with flat grounds
(smooth grounds, gradient < 10°, and obstacle height ≤ 1 cm); do not
use it in outdoor environments, such as open balconies, or rugged
grounds, such as stairs.
3. Do not use the robot at temperatures above 50°C or below 0°C or on
wet or sticky grounds.
4. Before using the robot, put away wires and cables on the ground in the
operating environment to prevent them from being dragged by the robot
and remove any sharp objects, such as decoration waste, glass, and nails,
on the ground to prevent damage to the robot chassis.
5. Do not use the robot in environments with combustible gases and
other hazards.
9
Operation Requirements
1. No personnel is allowed in the area in which the robot is operating.
2. The entire robot disinfection process must be monitored by an
operator to ensure timely manual intervention.
3. Manually control the robot with the spray disinfection function
disabled in public areas if the robot is not executing a disinfection task.
4. Unauthorized replacement of any component is strictly prohibited. If
replacement is necessary, do it with the approval and under the guidance
of FJD.
Check Before Use
1. Ensure that the robot has more than 30% battery power and sufficient
disinfectant.
2. Ensure that relevant parameters in the tablet terminal have been
calibrated before automatic operation.
3. Ensure that the Wi-Fi and network communications are normal. In the
event of any abnormality, fix it before using the robot.
4. Before starting the robot, check whether the safety devices, such as the
sensors and emergency stop switch, are normal.
10
Battery and Charging
1. Do not use any third-party batteries, adapters, or charging piles.
2. Do not remove, repair, or retrofit the battery or charging pile without
permission.
3. Do not wipe or clean the charging contacts of the charging pile with a
wet cloth or wet hands.
4. Do not discard battery scraps casually. Instead, hand them to
professional recycling agencies for disposal.
5. Do not place the charging pile near any heat source, such as heating
radiators.
6. If the robot will not be used for a long time, empty the disinfectant
tank, fully charge and power it off, and keep it in a cool, dry environment.
To prevent battery damage, charge the robot at least once a month.
7. To charge the robot, pay attention to its power supply requirements.
For the charging pile, the input voltage is 100–240 V AC and the output
voltage/current is 54.6 V/5 A DC.
8. Touch of the circuit connector is strictly prohibited while the robot is
being charged.
9. Directly rinsing the robot and charging pile with tap water is strictly
prohibited, because it may cause moisture accumulation or water entry
inside the device and serious irreparable faults.
Tabla de contenidos
Manuales populares de Robótica de otras marcas
STEMCenter USA
STEMCenter USA Pi-Bot v2.00 Manual de usuario
SunFounder
SunFounder PiDog Manual de usuario
Universal Robots
Universal Robots UR5 Manual de usuario
Universal Robots
Universal Robots E Series Manual de usuario
YASKAWA
YASKAWA MOTOMAN-MPL80 II Manual de usuario
EFORT
EFORT ECR5 Manual de instrucciones
