FIRST LOVE E17 Manual de usuario

Please read the instructions carefully before using the appliance.

E17

Wireless Handheld Vacuum Cleaner

User Manual

Thank you for choosing this appliance, hope you will enjoy it.

This user manual involves how to use the appliance safely and correctly，please read it carefully before

using to get an ideal operating result.

This user manual is updating till printing，brand FIRST LOVE .reserves the right of revising and

explaining.We will continue to improve the appliance and the right of revising this manual without any

notice.

If there is any question and suggestion during using please be feel free to contact with our after-sell

service.

1-888-234-6666

support@ﬁrstlovehome.com

https://www.ﬁrstlovehome.com/

Preface

Contents

1. Cautions ---------------------------------------- 1

2. Parts name ---------------------------------------2

3. What's in box ------------------------------------ 2

4. Parts connection ---------------------------------- 3、4

5. How to use -------------------------------------- 4

6. Cleaning and parts replacement -----------------------5、6

7. Q&A -------------------------------------------- 7

8. Technical parameters ------------------------------- 7

9. Circuit diagram ------------------------------------ 8

1. Cautions

2. Parts name

Before use, carefully read all the contents in this manual book.

1. This is a dry type rechargeable handheld vacuum cleaner. It can not be used to vacuum water,

detergent, and other liquids, and wet surface articles. Liquids will damage the cleaner, such as short

current or motor burning down.

2. Big particles will result in motor burning down or tube congestion.

3. Do not use or store the vacuum cleaner in unfavorable conditions such as high temperature or low

temperature. It is recommended to use the vacuum cleaner indoors with an ambient temperature of

0-40 ° C. Store it in a cool and dry place and do not allow long-term sunshine.

4. When using a new battery or the battery for the ﬁrst time after long-term storage, please fully

charge the battery. Please ensure to charge and discharge at least once every three months when the

machine is not used for a long time.

5. When your vacuum cleaner is fully charged and needs cleaning or maintenance, unplug the charger

without pulling the power cable.

6. When the battery capacity decreases and the service time of the machine becomes shorter, a new

battery pack can be purchased for replacement.

7. Waste battery pack should be safely recycled, do not throw away.

8. The lithium battery in the battery base can only be used on the unit, not for other purposes. Only

the built-in charging adapter can be used to charge. Do not remove the battery pack or contact it with

liquid to avoid damage or short circuit. Do not place the battery pack near high temperature objects or

open ﬂames. Do not insert the battery pack with sharp objects or damage the battery pack.

9. When the vacuum cleaner fails to work or related accessories are damaged in the process of use,

in order to avoid danger, users should not disassemble or assemble by themselves. They must go to

the designated maintenance point for professional maintenance or contact our after-sales service

personnel for inspection and maintenance.

10. Do not allow children to use, play with the unit and charge the battery pack to avoid accidents.

Dust cup

Charger

Conductive

tube

Electric

brush

Brush

attachment Filter Hypa

Recharge

battery

Wall mount Manual Certiﬁcate of

Conformity

1 1 1 21+1

1 1 1 1 1

1. dust cup 2. dust cup release button 3. tube release button

4. conductive tube 5. brush release button 6. electric brush

7. motor and dust cup release button 8. trigger button 9. max speed switch

10. battery pack 11. battery pack release button 12. battery quantity indicator light

13. charging port 14. brush combo 15. crevice brush

16. charger 17. wall mount

3.What’s in box

4. Parts connection

4-1 Battery pack assembly

Insert the battery pack into the bottom of the

body until you hear a "click" locking sound. Pay

attention to direction (as shown) .

4-3 Connection of ground brush

to metal pipe

Insert the brush connector into the metal

connector until you hear a "click" locking sound.

(As shown in the ﬁgure)

4-5Connection of ground brush to handheld component

Insert the brush connector into the interface of the handheld component until you hear a click

locking sound. (As shown in the ﬁgure)

4-2 Motor and dust cup assembly

Clamp the hook at the bottom of the motor dust

cup assembly into the corresponding part of the

host housing, and rotate it in the direction shown

by the arrow until the locking sound of "click" is

heard. (As shown in the ﬁgure)

4-4 Connection of metal tube to

hand held component

Insert the metal connector into the interface of

the handheld component and hear the "click"

locking sound. (As shown in the ﬁgure)

5. How to use

4-6 Attachment connection to handheld components

Insert the attachment into the interface of the handheld component until you hear a "click" locking

sound. (As shown in the ﬁgure)

5-1 Power on (low speed), high speed, power oﬀ

Install the machine, pull the trigger and the switch in turn, can realize the recycle switch of power

on(low speed), high speed, power oﬀ .

5-2 Use of accessories (use of 2-in-1 combined brush)

1. Insert the 2-in-1 combined brush into the suction port of the main machine, and then push the brush

head forward to lock it, then you can clean furniture, home appliances, bookshelves, cabinets, combing

tables, computer keyboards and other places.

4-7 Use of wall mount

1. Take out the hanger and secure it to the wall.

2. The hook at the bottom of the handheld

component is ﬁxed at the corresponding position

of the hanger. (As shown in the ﬁgure)

6. Cleaning and parts replacement

6-1 Clean after daily use

Press the release button of the lock on the top of the motor dust cup assembly to separate the motor

dust cup assembly from the body assembly, and then press the release button on the bottom cover of

the dust cup to open the bottom cover, and dust can be poured (suggestion: Dust can be poured after

each use).

2. Insert the 2-in-1 ﬂat suction into the suction port of the host machine, and then push the brush

head back to the end to clean the bed, curtain, sofa surface and other places.

5-3 Use of accessories (use of crevice brush)

Insert the crevice brush into the suction mouth of the host machine to clean the cracks of the sofa and

the skirting line of the wall.

5-4 The use of electric ﬂoor brush

First insert the electric brush into one end of the conductive tube, and then insert the other end of the

conductive tube into the host interface to clean the ﬂoor, carpet, tile and other places.

5-5 Charging

1. This machine can only be charged with its own charger, please conﬁrm the charger before charging.

2. Insert the plug of the charger into the power socket, and plug the output end into the charging

socket of the battery pack to charge. When charging normally, the indicator light shows "blinking blue"

, and when fully charged, the indicator light shows "blue light".

3. When the battery is low, charge it in time and unplug the charger in time after the battery is fully

charged.

4. You can charge the battery pack directly or the installed host.

6-2 Clean the dust cup

1. Press the release button of dust cup

bottom cover to open the dust cup bottom

cover, you can dump the garbage in the dust

cup. After dumping the garbage, close the

bottom cover of the dust cup until it is locked

(as shown in the picture)

2. Hold the dust cup with one hand and the

motor assembly with the other hand and rotate

counterclockwise until the dust cup assembly

can be removed. (As shown in the ﬁgure)

4. Pull the metal handle by hand and remove

the ﬁlter for cleaning or cleaning. (As shown in

the ﬁgure)

3. Remove the ﬁlter in the direction of the

arrow and clean or replace the ﬁlter. (As shown

in the ﬁgure)

5. After cleaning the ﬁlter, please put it in a

ventilated place to dry and then use it

fully(soak the ﬁlter with soapy water ﬁrst and

then rinse it with clean water. Do not rub it

repeatedly to avoid damaging the internal

structure of the ﬁlter). (As shown in the ﬁgure)

Fault Possible causes Solution

Motor stalling

Suction reduction

Roller stuck

Battery dead Charge the vacuum cleaner

Pour the dust out of the

dust cup

7. Q&A

6-3 Clean the electric ﬂoor brush

1. Push down the left slide button of the ground brush and lift the roller brush handle to remove the

roller brush. (As shown in the ﬁgure)

2. Remove and clean the roller brush, and then assemble it in the opposite order to disassemble it.

Reset the handle of the roller brush.

Please check the following points before consulting the maintenance

department.

——Note: After a long time of use, the rollers of the brush may be entangled with long ﬂoccule

such as hair, which needs to be cleaned in time so that the vacuum cleaner can work more

eﬀectively.

Dust cup is full

Clean or replace the dust

cup ﬁlter

Clean up the garbage inside

the electric brush

Roll brush block

Dust cup ﬁlter plate

accumulated dust electric

brush air duct blocked

Insuﬃcient charging time

Inhalation of excessive

volume of foreign body

Intertwining excessive hair

and ﬁbers

Battery aging

The charging connector

is not fully inserted into

the charging port of the

battery pack

The charging

indicator light is

dead when

charging

Insuﬃcient use

time after

charging

Insert the charging

connector completely into

the charging port of the

battery pack

Charge according to

standard time

Purchase new batteries at

designated repair points

Clean the roller brush and

restart the machine

Tabla de contenidos

Manuales populares de Aspiradora de otras marcas

Bissell

Bissell LittleGreen Proheat 1425 Series Manual de usuario

Panasonic

Panasonic MC-YL637S147-AE Manual de usuario

NEFF

NEFF N17XH10 0 Series Manual de usuario

LG A9 Series Manual de usuario

Oreck

Oreck Cordless Captura BK51700 Series Manual de usuario

Kogan

Kogan KAVACROBVWA Manual de usuario

Kränzle

Kränzle VENTOS 50 ID Guía del usuario

EVVO

EVVO Ai35 Manual de usuario

DeWalt

DeWalt DWH200D Manual de usuario

Pontec

Pontec Pondomatic Vacuum Cleaner Manual de usuario

Cleanmaxx

Cleanmaxx PC-P007E Manual de usuario

Exido

Exido 240-114 Manual de usuario

RIDGID

RIDGID WD1685AU0 Manual de usuario

Ezviz

Ezviz RE4P Manual de usuario

STG global

STG global TANVAC HDV3000 Manual de usuario

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manual de usuario

Factory

Factory M3340 Manual de usuario

Shop-Vac

Shop-Vac VN92 SERIES Manual de usuario