Firmtech BM1001 Manual de usuario
BM1001 & BM2001
Serial & USB Adaptor
ABOUT BM1001 & BM2001 version 4.0:
Class 1 / RS232 / USB Interface
DIP switch is available for a second setting
4dBi Dipole Antenna provided
A
T Command provided
BM1001 & 2001 v4.0.2
- 2 -
(C) Copyright FIRMTECH Co., Ltd. 2005
All rights reserved
The products and operation descriptions contained herein shall be protected by copyright law.
Any part or whole of products or operation description shall not be copied, reproduced,
translated, nor transformed into readable form by electronic device or machines, without prior
consent in writing by FIRMTECH Co., Ltd.
There might be some misprinting or technical faults in the products and operation description
which are subject to change without prior notice.
BM1001 & 2001 v4.0.2
- 3 -
FIRMTECH Co., Ltd.
Room 720, C Unit of Sigma Officetel, 18,
Kumi Dong, Bundang Ku,
Sungnam City, Kyonggi Do.
Homepage : www.firmtech.co.kr
Tel : +82-31-719-4812
Fax : +82-31-719-4834
BM1001 & 2001 v4.0.2
- 4 -
What is Bluetooth?
1. Features of Bluetooth
1) Objectives of Bluetooth : To Realize Wireless Communication for Short Distance with Low
Power Consumption, High Reliability, and Low Cost.
2) Frequency in Use: To Use ISM(Industrial, Scientific, Medical) Band which does not require
any permission to use.
- 2.400 – 2.4835 GHz, 79 channels
- 2.465 – 2.4835 GHz, 23 channels (in France)
3) Transmission Rate : 1Mbps ~ 3Mbps
4) Transmission Output : 1mW(10m, Class2), 100mW(100m Class1)
5) Network Configuration : Configured with Master and Slave relation. A Bluetooth unit shall
allow simultaneous connections up to 7 devices (in case of ACL).
6) Reliability : To Guarantee stable wireless communication even under severe noisy
environment through adopting the technique of FHSS (Frequency Hopping Spread Spectrum).
2. Operation of Bluetooth
<Figure 0-1 Operation of Bluetooth>
1) Once the Master will inquire the Slave, the Slave will respond to the inquiry to the Master.
2) When the information of Slave will agree with that of the Master, the interconnection will be
achieved to transmit the data.
BM1001 & 2001 v4.0.2
- 5 -
Products Overview
BM1001 / BM2001 has been developed to replace the previous RS232 Cable system with
wireless communication system to use.
Major Features of BM1001 & 2001
1. Bluetooth Specification 2.0 Support
2. Bluetooth Piconets(Point to Multipoint) are configurable up to (max. 1:5).
3. Easy to control communication speed by using DIP Switch. (2400 bps – 230400bps)
4. Support AT Command, and capable to control BM1001 & BM2001 by using AT Command.
5. Easy to connect to use with Bluetooth PDA, Bluetooth USB Dongle, etc.
6. Selectable Power Supply between D-Sub 9 pin Connector and USB Connector
7. Stable Data Transmission / Receipt
※We request the new users of BM1001 & 2001 to read the information on this
description carefully before they start to use the products.
BM1001 & 2001 v4.0.2
- 6 -
■List of Conten
1 PRODUCT COMPONENTS............................................................................................................................. - 7 -
1-1 BASIC COMPONENTS OF BM1001............................................................................................................- 7-
1-2 BASIC COMPONENTS OF BM2001............................................................................................................- 7-
2 PERFORMANCE OF PRODUCT AND POWER CONSUMPTION................................................... - 8 -
2-1 PERFORMANCE OF PRODUCT .......................................................................................................................- 8-
2-2 CURRENT CONSUMPTION ............................................................................................................................. - 9-
2-2-1 BM1001.................................................................................................. - 9 -
2-2-2 BM2001.................................................................................................. - 9 -
3 PRODUCT APPEARANCE............................................................................................................................ - 10 -
4 INITIAL SET VALUE OF PRODUCTS.....................................................................................................- 11 -
5 INTERFACE........................................................................................................................................................ - 12 -
5-1 BM1001 INTERFACE.................................................................................................................................. - 12 -
5-1-1 Connection Diagram with Flow Control..................................................- 13 -
5-1-2 Connection Diagram without Flow Control.............................................- 13 -
5-1-3 Connection Diagram with 1:N Function..................................................- 14 -
5-2 BM2001 INTERFACE.................................................................................................................................. - 15 -
5-2-1 Difference of BM1001 from BM2001 ......................................................- 15 -
5-2-2 Differences of BM2001 from USB Dongle ...............................................- 15 -
6 FEATURES OF DIP SWITCH..................................................................................................................... - 17 -
6-1 DIP SWITCH 1(FUNCTION SELECT)................................................................................................- 17 -
6-2 DIP SWITCH 2(BAUD RATE SELECTABLE).........................................................................................- 18 -
6-3 INITIAL SET VALUE OF DIP SWITCH ...................................................................................................... - 18 -
7 POWER INDICATOR LED / STATUS LED.......................................................................................... - 19 -
8 HOW TO COMPLETE PC CONFIGURATION?.................................................................................... - 20 -
8-1 PC CONFIGURATION USING CONFIG TOOL............................................................................................- 20 -
8-2 PC CONFIGURATION USING SERIAL COMMUNICATION(HYPER TERMINAL)PROGRAM.............- 23 -
8-2-1 To Execute Hyper Terminal....................................................................- 23 -
8-2-2 How to Use PC Configuration Menu........................................................- 26 -
BM1001 & 2001 v4.0.2
- 7 -
1 PRODUCT COMPONENTS
1-1 Basic Components of BM1001
MODEL PICTURE Q’TY
BM1001
(RS-232 Serial Adapter)
1EA
FBA-UPC
(USB Power Cable) 1EA
FBA004DA
(4dBi Dipole Ant)
1EA
CD
(Operation Manual and Test Program) 1EA
<Table 1-1: Basic Components of BM1001>
1-2 Basic Components of BM2001
MODEL PICTURE Q’TY
BM2001
(USB Serial Adapter)
1EA
FBA004DA
(4dBi Dipole Ant) 1EA
CD
(Operation Manual and Test Program) 1EA
<Table 1-2 : Basic Components of BM2001>
If you find any of above components is defective, or not included in the package, please
contact the seller you purchased.
BM1001 & 2001 v4.0.2
- 8 -
2 Performance of Product and Power Consumption
2-1 Performance of Product
Part Specification
Bluetooth Spec. Bluetooth Specification V2.0 Support
Communication distance 100 M
Frequency Range 2.4 GHz ISM Band
Sensitivity -83dBm (Typical)
Transmit Power 16dBm(Typical)
BM1001 66 x 31 mm
Size BM2001 73 x 22 mm
Support Bluetooth Profile SPP
BM1001 4 – 12V
Input Power BM2001 5V
Current Consumption 100 mA(Maximum)
Operating Temperature -10℃- 50℃
Communication Speed 2,400bps – 230,400bps
Antenna Dipole Antenna(4 dBi)
BM1001 9pin DSUB Female(RS232)
PC Interface BM2001 USB
Flow Control RTS, CTS, DTR, DSR support
<Table 2-1: Performance of BM1001 & 2001>
BM1001 & 2001 v4.0.2
- 9 -
2-2 Current Consumption
2-2-1 BM1001
Current Consumption
Status MIN MAX
Standby 9 17
Device searching 71 83
Pairing / Before Connection 65 71
After Connection 14 37
Data Transferring 36 43
Power save 7 9
<Table 2-2 : Current Consumption of BM1001>
2-2-2 BM2001
Current Consumption
Status MIN MAX
Standby 20 24
Device searching 100 106
Pairing / Before Connection 86 88
After Connection 50 55
Data Transferring 59 64
Power save 7 9
<Table 2-3 : Current Consumption of BM2001>
- TEST CONDITIONS
Baud rate : 9600 bps, Input Voltage : DC 5V
The power consumption is subject to change depending on the transmission rate and volume
of data.
BM1001 & 2001 v4.0.2
- 10 -
3 Product Appearance
<Figure 3-1 : Details and Dimension of BM1001>
<Figure 3-2 : Details and Dimension of BM2001>
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
