FireGL Fire GL3 Manual de usuario

Fire GL3

User's Guide

Information in this document is subject to change without notice.

Contents i

TABLE OF CONTENTS

INTRODUCING THE FIRE GL3.........................................................1

ABOUT YOUR FIRE GL3 ................................................................................ 1

Hardware Design................................................................................. 1

Operating Systems .............................................................................. 2

Typical Application Environments................................................... 3

System Requirements and Tools..................................................... 3

Performance Overview...................................................................... 4

HOW TO USE THIS USER'S GUIDE ................................................................ 5

Manual Conventions ........................................................................... 5

Viewing the User's Guide Online .................................................... 6

Do you Need a Printout

of the Online User's Guide? ............................................................. 6

QUICK INSTALLATION................................................................................... 7

Installation Steps .................................................................................. 7

INSTALLING THE FIRE GL3 ..............................................................8

INSTALLING THE HARDWARE ....................................................................... 8

Preparing your Computer................................................................. 9

Installing the Card ............................................................................... 13

Connecting the Cables and

Completing the Installation ............................................................... 15

INSTALLING THE SOFTWARE......................................................................... 18

Before you Start: Information, Tips, and Hints............................19

Software Installation for Windows NT4.0.................................... 20

Software Installation for Windows 2000 ...................................... 21

ii Contents

FIRE GL3 SOFTWARE UTILITIES...................................................... 23

CHANGING THE VIDEO SETTINGS ................................................................24

How to Switch to the Display Properties?....................................24

Setting Resolution and Refresh Rate...............................................24

Setting a DualScreen Configuration ................................................26

Selecting your Monitor.......................................................................29

Adjusting the Monitor Display..........................................................32

MODIFYING APPLICATION PROFILES ............................................................35

REMOVING THE FIRE GL3 DRIVERS................................................ 38

TROUBLESHOOTING........................................................................ 39

COMMON PROBLEMS AND SOLUTIONS ......................................................39

TECHNICAL DETAILS ....................................................................... 42

FEATURES AND PERFORMANCE.....................................................................42

Hardware ...............................................................................................42

Software .................................................................................................45

PIN ASSIGNMENTS...........................................................................................45

VIDEO MODES .................................................................................................47

BLOCK DIAGRAM............................................................................................48

TRADEMARKS AND REGULATORY.................................................. 49

TRADEMARKS...................................................................................................49

DISCLAIMER......................................................................................................50

EMI COMPLIANCE INFORMATION .................................................................51

Introducing the Fire GL3 1

INTRODUCING THE FIRE GL3

♦ABOUT YO U R FIRE GL3

♦HOW TO USETHIS USER'S GUIDE

♦QUICK INSTALLATION

ABOUT YOUR FIRE GL3

Hardware Design

The Fire GL3 is an AGP/ATX card based upon the IBM RC 1000/

GT 1000 chipset. With the ability to support two monitors and 128 MB

of on-board memory the Fire GL3 is ideal for digital content creation,

high-end CAD and other sophisticated 3D applications.

The RC1000 256 bit graphics rasterizer provides the functionality of a

VGA controller, a 2D/3D raster engine with geometry pipeline setup

processor, and a 300 MHz RAMDAC. It also supports video streaming

by providing color space conversion and a bilinear scaling unit.

The GT1000 hardware geometry engine is a complete transformation

and lighting engine with hardware implementation of the full open

OpenGL pipeline and most of the Direct3D geometry pipeline.

2 Introducing the Fire GL3

Operating Systems

The Fire GL3 supports the following operating systems:

♦ Microsoft Windows NT 4.0 with Service Pack 6 (or higher)

♦ Microsoft Windows 2000

♦ Linux - 2.2.x kernels, C Library 1.2 (LibC 6.2)

Download Linux drivers and installation instructions from

www.ati.com/support

Service Pack Information for Windows NT 4.0

You must be running Windows NT 4.0, updated with Service Pack 6 (or

higher) prior to installing the Fire GL3 drivers. The Service Pack is

available from Microsoft's web page, www.microsoft.com. For most

languages you can perform the Service Pack 6 update from the Fire GL

CD when you run the Quick Start utility.

Introducing the Fire GL3 3

Typical Application Environments

Fire GL3 offers outstanding 2D/3D performance in Windows NT,

Windows 2000, and Linux. Fire GL3 is optimized and certified for

professional 3D graphics in the following business environments.

♦Mechanical Engineering Analysis (MEA)

♦Mechanical Computer Aided Design (MCAD)

♦Electrical Design Automation (EDA)

♦Computer Aided Software Engineering (CASE)

♦Digital Content Creation (DCC)

♦Business Economic Modeling

♦3D Game Development

System Requirements and Tools

What do you need to install and use your Fire GL3?

♦Motherboard with free AGP slot.

Note:The bracket of the Fire GL3 also covers the expansion slot

next to the AGP slot.

♦Pentium II CPU or better

♦System interrupt (IRQ) which is free. This may have to be reserved

in the computer’s BIOS. For help with this subject, refer to the

manual for your mainboard.

♦Supported operating systems:

⇒Microsoft Windows NT 4.0 with Service Pack 6 (or higher)

⇒Microsoft Windows 2000

⇒Linux - 2.2.x kernels, C Library 1.2 (LibC 6.2)

♦CD-ROM drive

♦A screwdriver to remove and reinstall the PC cover screws and card

mounting screws. See your PC manual for specific requirements.

♦Fire GL CD-ROM for Fire GL3

4 Introducing the Fire GL3

Performance Overview

Note: For more detailed information on features and performance

please refer to the section Technical Details.

Hardware Performance

♦32-bit RGBαTrueColor 2D and 3D acceleration

Note: The Fire GL3 does not support 8-bit or 16-bit video modes

♦Accelerated, double-buffered 32-bit TrueColor up to 1920 x 1200,

at 75 Hz refresh rates

♦24-bit Z-buffer, 8-bit double-buffer, 8-bit single-buffer overlay

♦Video engine supports YUV conversion, point and bilinear scaling

Software Features

♦Multiprocessor system support

♦ThreadSafe OpenGL 1.2 ICD support for dual processors.

♦Supports Streaming SIMD Extensions (SSE) in Intel Processors

♦Supports AMD Athlon™ processor-based systems with 3DNow!

technology

♦Customized application settings for individual ISV applications

♦Dual monitor support - with a single card

♦DDC2B monitor support on all operating system platforms

Introducing the Fire GL3 5

HOW TO USE THIS USER'S GUIDE

For your convenience, this online User’s Guide has been formatted as

an Adobe®Acrobat®PDF file. This format gives you great flexibility

when using this documentation.

Many hyperlinks provide easy access to any information you may want.

To make it useful in a printed format, too, a - hyperlinked - table of

contents and page numbers are provided.

Because it was designed to be used online and printed, some of the

images may not print clearly or appear very clearly on screen.

Manual Conventions

Your Fire GL3 User’s Guide is organized in a standard, familiar way. A

few icons are used to point out important information:

This icon marks useful tips or important operational notes.

This icon is a warning about possible electrical/software hazards or

problems.

6 Introducing the Fire GL3

Viewing the User's Guide Online

You can also read the User's Guide online—important hypertext links,

such as Table of Contents entries, World Wide Web, and email

addresses are active.

Place your mouse cursor over Table of Contents entries or main

headings. If the hand icon changes to a pointing index finger, simply

click and you will move to that place in the document. Some email or

World Wide Web addresses inside this manual may be active as well.

Go directly to a Web, FTP site, or email program simply by clicking on

an active link. Displaying the provided bookmark and thumbnail views

may help you with the orientation and navigation in the User's Guide.

This manual might be displayed with slightly-reduced magnification in

your Reader. If you experience any difficulty reading certain files

online, use the Reader’s Zoom To feature from the View menu and

increase the magnification to about 150%. To view some screenshot

images perfectly clear you may need a larger magnification.

Do you Need a Printout of the Online User's

Guide?

You can easily print this User's Guide to access it off-line. The manual

then will look like any standard document with a table of contents and

page numbers.

For printing the User’s Guide, a print resolution of 600 dpi -or higher -

is recommended.

Introducing the Fire GL3 7

QUICK INSTALLATION

♦Brief instructions on how to get to work with the Fire GL3 in the

shortest possible time.

♦Recommended for experienced users and system administrators

only.

♦For more detailed information on installation and operation of your

graphics accelerator, please refer to the corresponding sections of

the Fire GL3 User’s Guide.

Installation Steps

1. Un-install the drivers and software for your old graphics card.

2. Set the display driver to Standard VGA.

Disable any on-board graphics solution on the motherboard.

3. Shut down and disconnect your computer system.

4. Remove the installed (AGP, PCI, or ISA) VGA card.

5. Install the new Fire GL3 card.

6. Reassemble and connect your computer system.

7. Install the Fire GL3 drivers and configuration software from the

Fire GL CD:

⇒automatic Quick Start utility or

⇒Start > Run > X:\START EXE

where Xis the drive letter of your CD-ROM drive

Tabla de contenidos

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario