FIC AT31 Instrucciones de montaje

AT31

MAINBOARD

MANUAL

DOC No.: M01806

Rev. :A1

Date : 6, 2002

Part No. : 25-11650 -01

Handling Precautions

Warning:

1. Static electricity may cause damage to the integrated circuits on

the motherboard. Before handling any motherboard outside of its

protective packaging, ensure that there is no static electric charge

in your body.

2. There is a danger of explosion if the battery is incorrectly

replaced. Replace only with the same or an equivalent type

recommended by the manufacturer.

3. Discard used batteries according to the manufacturer’s

instructions.

4. Never run the processor without the heatsink properly and firmly

attached. PERMANENT DAMAGE WILL RESULT!

Observe the following basic precautions when handling the motherboard

or other computer components:

nWear a static wrist strap which fits around your wrist and is

connected to a natural earth ground.

nTouch a grounded or anti-static surface or a metal fixture such as a

water pipe.

nAvoid contacting the components on add-on cards, motherboards,

and modules with the golden fingers connectors plugged into the

expansion slot. It is best to handle system components by their

mounting brackets.

The above methods prevent static build-up and cause it to be discharged

properly.

Trademark

All trademarks mentioned in this manual are registered properly of

the respective owners.

Handling Precautions

This manual may not, in whole or in part, be photocopied, reproduced,

transcribed, translated, or transmitted in whatever form without the

written consent of the manufacturer, except for copies retained by the

purchaser for personal archival purposes.

Notice

Tableof Contents

Table of Contents

Chapter 1 Overview

Package Checklist .......................................................................... 1-2

The AT31 Mainboard ................................................................ 1-3

Main Features ................................................................................ 1-4

FIC Unique Innovation for Users (NOVUS) -

Enhanced Mainboard Features and System Support .................... 1-6

Chapter 2 Installation Procedures

Quick Reference (from Page 2-2 to 2-4) .......................................... 2-2

Mainboard Layout .................................................................... 2-2

1). Clear CMOS, FSB Speed Select

CPU/SDRAM/PCI/AGP Speed Select ........................... 2-3

2). Front Panel Block Cable Connection ............................ 2-4

3). CPU Fan Installation .................................................... 2-4

1). Set System Jumpers/Switches ................................................... 2-5

Clear CMOS: J3 ................................................................. 2-5

FSB and CPU/SDRAM/PCI/AGP Speed Select:

J4, J5, and J7 ...................................................................... 2-6

2). Install Memory Modules .......................................................... 2-7

3). Install the CPU .......................................................................... 2-8

4). Install Expansion Cards ............................................................. 2-9

5). Connect Devices ....................................................................... 2-10

Floppy Diskette Drive Connector ..................................... 2-10

IDE Device Connectors ..................................................... 2-11

ATX Power Connectors .................................................... 2-11

Fan Connectors ................................................................. 2-12

TV Out Connector ............................................................. 2-12

Wake-On-Ring Connector ................................................. 2-13

Quick Reference (German) G-1

Quick Reference (French) F-1

Quick Reference (Spanish) S-1

Quick Reference (Japanese) J-1

Quick Reference (Chinese) C-1

Quick Reference (Simplified Chinese) |||||||||||||SC-1

AT31MainboardManual

Wake-On-Lan Connector .................................................. 2-13

CD Audio-In Connectors ................................................... 2-14

SPDIF Out Connector (optional) ....................................... 2-14

Front Panel Block and IR Connector .................................. 2-15

PS/2 Keyboard and Mouse Connector ............................. 2-16

Game/MIDI Connector ...................................................... 2-16

Universal Serial Bus Connectors ....................................... 2-17

Serial Port Connectors ....................................................... 2-17

Printer Connector .............................................................. 2-18

Audio I/O Jacks ................................................................ 2-18

LAN I/O Connector (optional) .......................................... 2-19

Chapter 3 BIOS Setup

CMOS Setup Utility ....................................................................... 3-1

Standard CMOS Setup ................................................................... 3-2

Advanced BIOS Features .............................................................. 3-4

Advanced Chipset Features .......................................................... 3-8

Integrated Peripherals .................................................................... 3-9

Power Management Setup ............................................................. 3-14

PnP/PCI Configurations ................................................................. 3-18

PC Health Status ............................................................................ 3-20

Frequency/Voltage Control ............................................................ 3-20

Load Fail-Safe Defaults .................................................................. 3-21

Load Optimized Defaults ................................................................ 3-21

Supervisor/User Password ............................................................ 3-21

Save and Exit Setup ....................................................................... 3-22

Exit without Saving ........................................................................ 3-22

1 - 1

Overview

Chapter 1

The new 1stMainboard®AT31Ôis an Micro ATX sized motherboard sup-

porting the latest generation of AMD®processors at industry leading speeds.

By utilizing DDR ( Double Data Rate ) transfer rate the 100/133 MHz system bus

effectively reaches Front Side Bus speeds of 200/266 MHz. The board pro-

vides users with an ATA100 data transaction for hard drives and allows up to

2 GB memory totally by 2 PC1600/PC2100 (DDR200/266) DIMM sockets.

The AT31 is based around the high performance ATI IGP320Ôcore chip as a

North Bridge and VIA VT82686BÔ as a South Bridge. The virtual AGP4x

functions supported by ATI IGP320Ôthat ideal for Windows 2000Ôpro-

vides you with a photo-realistic 3D experience suitable for the most 3D games

and software environments. AC97 Codec that embedded in VIA 686B, ensures

high quality sound effect.

The mainboard also comes equipped with the new NOVUS®range of innova-

tive features that assist in the installation and maintenance. The features in-

clude Easy Key, which provides instant keyboard access to the BIOS for

adjustments to Clock and Default settings and LogoGenie, which allows you

to create your own customized logo to be displayed during system boot up.

The BIOS Guardian is an Anti Virus utility that prevents viruses from damag-

ing your system BIOS and rendering your system inoperative.

Expansion is provided by 1 AGP 4X and 3 PCI slots. In addition, the

1stMainboard is equipped standard I/O connections include 2 serial ports (1

by pinheader), 1 parallel port, 1 VGA port, 1 PS/2 mouse and keyboard connec-

tor, 4 USB ports (2 by pinheader), 1 IR port by pinheader, and 1 media connec-

tor (Line-In, Line-Out, Mic-In, 1 front audio, 1 game port).

1 - 2

AT31MainboardManual

Package Checklist

If you discover any item below was damaged or lost, please contact your

vendor.

þThe mainboard þThis user manual

þOneFDDcable þ CD software

þOneATA100cable

oTV Out Paddle Card (Giftbox only)

IMPORTANT:AMDCPUHEATSINKINSTALLATION

Be ware finish heat sink install. Before you boot system, please

check the heat sink is complete contact with die of CPU.

The poor contact will bring about over heat, it may damage your

processor.

Itisstronglyrecommendedthatatleasta250-watt ATXpowerpupply

be used for this motherboard. Make sure that your ATX power sup-

ply can supply at least 20 amperes on teh +5-Volt lead and 10mA

on the +5-Volt standby lead (+5VSB). Your system may become

unstable / unreliable and may experience difficulty in powering up if

your power supply is inadequate.

NOTE: CD Pro that contains patch files, onboard video/audio chip

drivers, related online help and other useful information can be

found in your mainboard package.

Please install it right after your Windows operating system installa-

tion is done.

Place your CD Pro in the drive, an operating menu will

appears in your monitor. Please select

Auto Installation

. It will auto-

matically detect which software tools (patch files, drivers) that the

mainboard needs. Press OK button to go through the whole instal-

lation procedure in a very straight forward and easy way. It also

provides you with a custom way to select wanted patch files and

software drivers that for onboard chips use. The top menu of the

CD Pro lists all the functions that allowed by this board.

1 - 3

Overview

The AT31 Mainboard

1 - 4

AT31MainboardManual

Main Features

nEasy Installation

||BIOS with support for Plug and Play, auto detection of IDE hard drives,

||LS-120|drives, IDE ZIP drives. The mainboard supports Windows 2000,

|Windows XP only.

nLeading Edge Chipset

ATI IGP320 is a North Bridge with integrated 2D/3D graphics accelerator.

The chip is designed for offering a reliable, effective,and excellent perfor-

mance. It contains internal AGP controller, concurrent PCI bus controller,

advanced DRAM controller, and power management support.

nVersatile Main Memory Support

Accepts up to total 2 GB DRAM using two DDR DIMMs from 256 MB to

2 GB with support for lightenning-fast PC1600/PC2100 (DDR200/266) DDR

SDRAM .

nAMD Processors Support

Athlon: 900 MHz to 1.4 GHz and up*at 200 MHz FSB/

1.1 GHz to 1.4 GHz at 266 MHz FSB; (1.2 GHz not included)

Athlon XP: 1500+ to 2100+ and up* at 266 MHz FSB;

Duron: 900 MHz to 1.3 GHz and up* at 200 MHz FSB

(1.0, 1.2 GHz not included)

(*: not tested yet)

nEnhanced PCI Bus Master IDE Controller with Ultra DMA 33/66/100

Support

Integrated Enhanced PCI Bus Master IDE controller features two dual-

channel connectors that up to four Enhanced IDE devices, including CD-

ROM and Tape Backup Drives, as well as Hard Disk Drives supporting

the new Ultra DMA 100 protocol. Standard PIO Mode 3, PIO Mode 4,

DMA Mode 2, DMA Mode 4, UltraDMA-100 Mode 5 devices are also

supported.

1 - 5

Overview

nIntegrated Audio Subsystem

Embedded audio features in the VIA 686B provide hardware Sound

BlasterProfor Windows DOS box and real mode DOS legacy compatibil-

ity, dual full-duplex Direct Sound channels between system memory and

AC97 link.

nSuper Multi Input/Output (I/O) Support

Integrated super I/O controller in the VIA 686B features two high-speed

UART serial ports, one multi-mode (standard/ECP/EPP) parallel port, one

IR port, and one FDD connector.

nConvenient Rear Panel USB Connection Support

Two USB ports integrated in the rear I/O panel with two extra USB pin-

heads for either front or rear panel connections to the growing number of

USB compliant peripheral devices on the market.

nLAN Support (optional)

One RJ45 LAN jack on the rear panel and onboard LAN controller allows

you to connect with network system in a very easy way.

nAGP and PCI Expansion Slots

One AGP and three PCI Bus expansion slots provided the room to install

a full range of add-on cards.

(For supported AGP cards, please refer to the approval sheet on FIC

web site.)

nTV Out Support (optional)

Support both NTSC and PAL TV with an optional TV out bracket and a

cable.

1 - 6

AT31MainboardManual

nBIOS Guardian

BIOS Guardian effectively acts as a fire-wall against viruses that can

attack the BIOS while the system is running and by default is enabled.

WARNING:

BIOSGuardianmust bedisabledbefore reflashBIOS.

nEasy Key

Instead of completing the multi-layered BIOS setup process these 3 Easy

Key functions provide direct access to Sub-Menu when completing BIOS

settings adjustments.

Easy-Keys are as follows:

Ctrl + c: To enter clock settings menu.

Ctrl + p: To load Performance Default settings and restart.

Ctrl + f: To load Fail-Safe Default settings and restart.

NOTE:

Please read Page 3-7 for detail information.

FIC Unique Innovation for Users (NOVUS) -

Enhanced Mainboard Features and System Support

nLogoGenie

A user friendly GUI supporting Windows 95/98/98SE (not Windows 2000/

NT/ME/XP), LogoGenie allows you to customize, create or select a Logo

which will be displayed when the system is booting.

NOTE:

Please read Page 3-7 for detail information.

Tabla de contenidos

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario