Fibocom L830-EB-11 Instrucciones de uso

L830-EBHardware User Manual Page

L830-EB-11 Hardware User Manual

Version: V1.0.2

Update date: 2017.09.21

L830-EB-11 Hardware User Manual Page 2 of 39

Applicability Table

No. Product model Description

1 L830-EB-11 NA

L830-EB-11 Hardware User Manual Page 3 of 39

Without the prior written permission of the copyright holder, any company or individual is prohibited to

excerpt, copy any part of or the entire document, or distribute the document in any form.

Notice

The document is subject to update from time to time owing to the product version upgrade or other

reasons. Unless otherwise specified, the document only serves as the user guide. All the statements,

information and suggestions contained in the document do not constitute any explicit or implicit

guarantee.

Version Record

Version Update Remark

V1.0.0 2017.04.25 Initial version

V1.0.1 2017-09-21

1. Update timing of power on/off and reset

2. Modify the RF Band

3. Modify the packing description

L830-EB-11 Hardware User Manual Page 4 of 39

Contents

1 Preface....................................................................................................................................................................6

1.1 Introduction.....................................................................................................................................................6

1.2 Reference Standard......................................................................................................................................6

1.3 Related Documents...................................................................................................................................... 6

2 Overview.....................................................................................................................................................................7

2.1 Introduction.....................................................................................................................................................7

2.2 Specification...................................................................................................................................................7

2.3 Application Framework................................................................................................................................. 8

2.4 Hardware Framework................................................................................................................................... 9

3 Application Interface.................................................................................................................................................9

3.1 M.2 Interface.................................................................................................................................................. 9

3.1.1 Pin Map............................................................................................................................................. 10

3.1.2 Pin Definition.....................................................................................................................................11

3.2 Power Supply...............................................................................................................................................14

3.2.1 Power Supply................................................................................................................................... 15

3.2.2 Logic level......................................................................................................................................... 16

3.2.3 Power Consumption........................................................................................................................16

3.3 Control Signal.............................................................................................................................................. 17

3.3.1 Module Start-Up...............................................................................................................................17

3.3.1.1 Start-up Circuit................................................................................................................................................17

3.3.1.2 Start-up Timing Sequence............................................................................................................................ 18

3.3.2 Module Shutdown............................................................................................................................19

3.3.3 Module Reset................................................................................................................................... 20

3.4 USB Interface...............................................................................................................................................21

3.4.1 USB Interface Definition................................................................................................................. 21

3.4.2 USB Interface Application.............................................................................................................. 21

3.5 USIM Interface.............................................................................................................................................22

3.5.1 USIM Pins......................................................................................................................................... 22

3.5.2 USIM Interface Circuit.....................................................................................................................23

3.5.2.1 N.C. SIM Card Slot........................................................................................................................................ 23

3.5.2.2 N.O. SIM Card Slot........................................................................................................................................ 23

3.5.3 USIM Hot-Plugging..........................................................................................................................24

L830-EB-11 Hardware User Manual Page 5 of 39

3.5.4 USIM Design.................................................................................................................................... 25

3.6 Status Indicator............................................................................................................................................25

3.6.1 LED#1 Signal....................................................................................................................................26

3.6.2 WOWWAN#......................................................................................................................................26

3.7 Interrupt Control.......................................................................................................................................... 27

3.7.1 W_DISABLE1#.................................................................................................................................27

3.7.2 Body SAR..........................................................................................................................................28

3.8 Digital Audio................................................................................................................................................. 28

3.8.1 I2S Mode...........................................................................................................................................28

3.8.2 PCM Mode........................................................................................................................................ 29

3.9 I2C Interface Description........................................................................................................................... 29

3.10 Clock Interface.......................................................................................................................................... 30

3.11 Configuration Interface.............................................................................................................................30

3.12 Other Interfaces........................................................................................................................................ 31

4 Radio Frequency.................................................................................................................................................... 31

4.1 RF Interface................................................................................................................................................. 31

4.1.1 RF Interface Functionality.............................................................................................................. 31

4.1.2 RF Connector Characteristic......................................................................................................... 31

4.1.3 RF Connector Dimension...............................................................................................................32

4.2 Operating Band........................................................................................................................................... 33

4.3 Transmitting Power..................................................................................................................................... 33

4.4 Receiver Sensitivity.................................................................................................................................... 33

4.5 GNSS............................................................................................................................................................ 34

4.6 Antenna Design........................................................................................................................................... 34

5 Structure Specification...........................................................................................................................................35

5.1 Product Appearance................................................................................................................................... 35

5.2 Dimension of Structure...............................................................................................................................35

5.3 M.2 Interface Model....................................................................................................................................36

5.4 M.2 Connector............................................................................................................................................. 37

5.5 Storage..........................................................................................................................................................37

5.5.1 Storage Life...................................................................................................................................... 37

5.6 Packing......................................................................................................................................................... 37

5.6.1 Tray Package....................................................................................................................................38

5.6.2 Tray size............................................................................................................................................ 39

L830-EB-11 Hardware User Manual Page 6 of 39

1 Preface

1.1 Introduction

The document describes the electrical characteristics, RF performance, dimensions and application

environment, etc. of L830-EB (hereinafter referred to as L830). With the assistance of the document and

other instructions, the developers can quickly understand the hardware functions of L830 modules and

develop products.

1.2 Reference Standard

The design of the product complies with the following standards:

3GPP TS 34.121-1 V10.8.0: User Equipment (UE) conformance specification;Radio

transmission and reception (FDD);Part 1: Conformance specification

3GPP TS 36.521-1 V10.6.0: User Equipment (UE) conformance specification; Radio

transmission and reception; Part 1: Conformance testing

3GPP TS 21.111 V10.0.0: USIM and IC card requirements

3GPP TS 51.011 V4.15.0: Specification of the Subscriber Identity Module -Mobile Equipment

(SIM-ME) interface

3GPP TS 31.102 V10.11.0: Characteristics of the Universal Subscriber Identity Module (USIM)

application

3GPP TS 31.11 V10.16.0: Universal Subscriber Identity Module (USIM) Application

Toolkit(USAT)

3GPP TS 36.124 V10.3.0: ElectroMagnetic Compatibility (EMC) requirements for mobile

terminals and ancillary equipment

3GPP TS 27.007 V10.0.8: AT command set for User Equipment (UE)

PCI_Express_M.2_Specification_Rev1.1

1.3 Related Documents

RF Antenna Application Design Specification

L8-Family System Driver Integration and Application Guidance

L8-Family AT Commands Manual

EU Regulator Conformance

Hereby, We,Fibocom WirelessInc.declaresthatthe radio equipment type L830-EB-11isincompliance

with the Directive 2014/53/EU.

In all cases assessment of the final product must be mass against the Essential requirements of the

Directive 2014/53/EU Article 3.1(a) and (b), safety and EMC respectively,as well as any relevant Article

3.2 requirements.

External antenna is used with the module during the testing process, the maximum antenna gain for

frequency < 1G is 3dBi, for frequency > 1G is 5dBi and the antenna separation distance is 20cm.

EU Declaration of Conformity (DoC)

Hereby,

Name of manufacturer: Fibocom Wireless Inc.

Address: 5/F, Tower A, Technology Building II, 1057 Nanhai Blvd,

Nanshan,

City: Shenzhen,

Country: China

declares that the DoC is issued under its sole responsibility and that this product:

Product description: LTE module

Type designation(s): L830-EB-11

Trademark: Fibocom

Product Identification

Element L830-EB-11

is in conformity with the relevant Union harmonization legislation:

Radio Equipment directive: 2014 / 53 / EU.

with reference to the following standards applied:

1. Health (Article 3.1(a) of Directive 2014/53/EU)

Applied Standard(s):

EN 62311 : 2008

2. Safety (Article 3.1(a) of Directive 2014/53/EU)

Applied Standard(s):

EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013

3. Electromagnetic compatibility (Article 3.1 (b) of Directive 2014/53/EU)

Applied Standard(s):



Draft EN 301 489-1 V2.2.0 / -52 V1.1.0

4. Radio frequency spectrum usage (Article 3.2 of Directive 2014/53/EU)

Applied Standard(s):

EN 301 908-1 V11.1.1 / -2 V11.1.1 / -13 V11.1.1

The Notified Body SIEMIC INC. with Notified Body number 2200 performed:

Modules: B+C and issued the EU-type examination certificate.

Signed for and on behalf of:

Date: September 7, 2017

City: Shenzhen,

Name: Alan Yu

Title: Test Director

Signature:

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body.

This device is intended only for OEM integrators under the following conditions:

2) The transmitter module may not be co-located with any other transmitter or antenna.

As long as 2 conditions above are met, further transmitter test will not be required. However,

the OEM integrator is still responsible for testing their end-product for any additional

compliance requirements required with this module installed

IMPORTANT NOTE: In the event that these conditions can not be met (for example certain

laptop configurations or co-location with another transmitter), then the FCC authorization is

no longer considered valid and the FCC ID can not be used on the final product. In these

circumstances, the OEM integrator will be responsible for re-evaluating the end product

(including the transmitter) and obtaining a separate FCC authorization.

End Product Labeling

This transmitter module is authorized only for use in device where the antenna may be

installed such that 20 cm may be maintained between the antenna and users. The final end

product must be labeled in a visible area with the following: Contains FCC ID:

The grantee's FCC ID can be used only when all FCC compliance requirements are met.

Manual Information To the End User

The OEM integrator has to be aware not to provide information to the end user regarding how

to install or remove this RF module in the user’s manual of the end product which integrates

this module. The end user manual shall include all required regulatory information/warning as

show in this manual.

ZMOL830EB11

External antenna is used with the module during the testing process, the maximum antenna gain for

frequency<1G is 3dBi, for frequency>1G is 5 dBi and the antenna separation distance is 20cm.for frequency>1G is 5 dBi and the antenna separation distance is 20cm.

External antenna is used with the module during the testing process, the maximum antenna gain

L830-EB-11 Hardware User Manual Page 7 of 39

2 Overview

2.1 Introduction

The L830 is a highly integrated 4G cellular module which uses the standard PCIe M.2 interface.It supports

LTE FDD/WCDMA mode cellular communication.

2.2 Specification

Specification

Operating Band

LTE FDD: Band 1,3,7,8,20,28,32

WCDMA/HSPA+: Band I, VIII

GPS/GLONASS: Not Support

LTE inter-band CA

1 +3,7,20

3 +7,8,20,28,32

7 +20,28

LTE intra-band CA 3,7

Data Transmission

LTE FDD 300Mbps DL/50Mbps UL(Cat 6)

UMTS/HSPA+

UMTS:384 kbps DL/384 kbps UL

DC-HSDPA+:42Mbps DL(Cat 24)/5.76Mbps UL(Cat6)

Power Supply DC 3.135V～4.4V, Typical 3.3V

Temperature

Normal Operating temperature：-10°C ～+55°C

Extended Operating temperature：-30°C ～+65°C

Storage temperature：-40°C ～+85°C

Physical

characteristics

Interface: M.2 Key-B

Dimension：30 x 42 x 2.3mm

Weight: About 5.8 g

Interface

Antenna Connector

WWAN Main Antenna x 1

WWAN Diversity Antenna x 1

Function Interface USIM 3V/1.8V

Tabla de contenidos

Otros manuales de Hardware de computadora de Fibocom

Fibocom

Fibocom H350 Series Instrucciones de uso

Fibocom

Fibocom SC128 Instrucciones de instalación

Fibocom

Fibocom NL952-NA-00 Instrucciones de uso

Fibocom

Fibocom FG621-LA Series Instrucciones de instalación

Fibocom

Fibocom FM350-GL Instrucciones de instalación

Fibocom

Fibocom H330SS Instrucciones de uso

Fibocom

Fibocom L860-GL-16 Instrucciones de instalación

Fibocom

Fibocom L831-EAU-01 Instrucciones de uso

Fibocom

Fibocom NL668-EAU-MiniPCIe-10 Manual de usuario

Fibocom

Fibocom FM150-NA Series Manual de usuario

Fibocom

Fibocom MG661-EU Instrucciones de instalación

Fibocom

Fibocom MC610 Series Instrucciones de instalación

Fibocom

Fibocom EVK-GT8230 Manual de usuario

Fibocom

Fibocom SU806 Series Instrucciones de instalación

Fibocom

Fibocom L816-AM Instrucciones de uso

Fibocom

Fibocom L610 MiniPCIe Series Instrucciones de instalación

Fibocom

Fibocom L830-EB Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario