FiberHome HG6145F Manual de usuario
HG6145F
GPON Optical Network Terminal
Product Manual
Version: A
FiberHome Telecommunication Technologies Co., Ltd.
November 2020
Thank you for choosing our products.
We appreciate your business. Your satisfaction is our goal.
We will provide you with comprehensive technical support
and after-sales service. Please contact your local sales
representative, service representative or distributor for any
help needed at the contact information shown below.
Fiberhome Telecommunication Technologies Co., Ltd.
Address: No. 67, Guanggu Chuangye Jie, Wuhan, Hubei, China
Zip code: 430073
Tel: +6 03 7960 0860/0884 (for Malaysia)
+91 98 9985 5448 (for South Asia)
+593 4 501 4529 (for South America)
Fax: +86 27 8717 8521
Website: http://www.fiberhomegroup.com
Legal Notice
are trademarks of FiberHome Telecommunication Technologies Co., Ltd.
(Hereinafter referred to as FiberHome)
All brand names and product names used in this document are used for
identification purposes only and are trademarks or registered trademarks
of their respective holders.
All rights reserved
No part of this document (including the electronic version) may be
reproduced or transmitted in any form or by any means without prior
written permission from FiberHome.
Information in this document is subject to change without notice.
Safety Precautions
For your correct and safe operations on the equipment, please carefully read and
strictly observe the following safety instructions:
uHigh optical power can cause bodily harm, especially to eyes. Never look
directly into the end of the optical transmitter fiber jumper or the end of its active
connector.
uExercise care if you must bend fibers. If bends are necessary, the fiber bending
radius should never be less than 38 mm.
uOverloaded power sockets or damaged cables and connectors may cause
electric shock or fire. Regularly check related electric cables. If any of them is
damaged, replace it immediately.
uUse the power supply adapter provided in the package only. Using other
adapters may cause equipment damage or operation failures.
uInstall the equipment in a well ventilated environment without high temperature
or direct sunlight to protect the equipment and its components from overheating,
which can result in damage.
uDisconnect the power in lightning weather and disconnect all the wires and
cables on the device (such as the power cable, network cable and phone
cable), so as to prevent device from being damaged by lightning.
uDo not place this equipment in damp or near moisture environment. Water will
lead to abnormal operation of device and even the danger caused by short
circuit.
uDo not lay this equipment on an unsteady base.
I
Contents
Safety Precautions..................................................................................................I
1Documentation Guide .....................................................................................1
2Product Introduction........................................................................................2
2.1 Product Positioning...........................................................................3
2.2 Product Specifications ......................................................................3
2.3 Interface Specifications.....................................................................4
2.3.1 GPON Interface ..................................................................4
2.3.2 LAN Interface......................................................................4
2.3.3 POTS Interface...................................................................5
2.3.4 Wi-Fi Interface ....................................................................5
2.3.5 USB Interface .....................................................................6
2.4 Introduction to the HG6145F .............................................................6
2.4.1 Appearance........................................................................6
2.4.2 Product Characteristics.......................................................9
2.4.3 Functions and Features ....................................................11
2.4.4 Technical Specifications....................................................15
3Handling Common Problems ........................................................................16
3.1 Power Status Indicator LED Extinguished........................................17
3.2 Register Status Indicator LED Extinguished ....................................17
3.3 Optical Signal Status Indicator LED Blinking....................................17
3.4 Ethernet Interface Status Indicator LED Extinguished ......................17
3.5 Failing to Detect ONT Using Wi-Fi ...................................................18
3.6 Failing to Access Local Web Login GUI and Failing to Ping
192.168.1.1 ....................................................................................18
3.7 Failing to Access Internet Using the LAN Port..................................18
3.8 Failing to Access Internet Using Wi-Fi .............................................19
3.9 Measured Internet Access Rate Lower or Higher Than the Standard
Value..............................................................................................19
3.10 Test of Voice Service Failed ............................................................19
4Standards and Protocols...............................................................................20
Appendix A Abbreviations ............................................................................23
Tabla de contenidos
Otros manuales de Terminal táctil de FiberHome
