FiberHome GZF1900-VH Manual de usuario

FiberHome/SM/GZF1900-VH

GZF1900-VH Repeater

(B40Y01JW02YF)

User Manual

Nov. 2010

FiberHome reserves the right to make changes without further notice to any

products herein to improve reliability, function or design. FiberHome does not

assume any liability arising out of the application or use any product or circuit

described herein.

No part of this documentation may be excerpted, reproduced, translated, annotated

or duplicated, in any form or by any means without the prior written permission of

FiberHome Corporation.

Instruction for your safety

Please be sure to pay attention to all cautions and warnings

before using the system.

Incorrect usage could lead to an electrical shock, damage to

the system or a fire hazard.

■Warning

Do not modify, disassemble or remove the cover. These actions could cause electrical

shock. We shall never be responsible for any problems caused by your reconstruction or

modification.

Do not touch the internal components. They may have high voltage or high temperature.

You may get electrical shock or burnt.

When the system is operating, keep your hands and face away from it. Otherwise, you

may get injured by an accident.

■Caution

Please read catalogue and instruction manual carefully before use.

Use the products within the specified input voltage, temperature and humidity. Use of

products in non-specified condition may damage the product.

Connect the frame ground terminal to the ground terminal of the device for safety. Use

of the products without ground connection may cause an electrical shock.

Do not use the product in the environment with strong electromagnetic field, gas and

conductive substances.

iii

Preface

GZF1900-VH Repeater is widely used for constructing a hybrid mobile communications

network. It receives and amplifies forward and reverse Radio Frequency (RF) signal to

extend the coverage of base station. This user manual covers the system frame, technical

specification, operation and maintenance of software of the repeater.

INDEX

1. GENERAL ...........................................................................................................................................1

1.1 SYSTEM FRAME................................................................................................................................1

1.2 PRODUCT FEATURES.........................................................................................................................2

1.3 HARDWARE AND SOFTWARE CONFIGURATION REQUIREMENT..........................................................3

1.3.1 Computer Hardware.............................................................................................................3

1.3.2 Computer Software...............................................................................................................3

1.4 TECHNICAL SPECIFICATION ..............................................................................................................3

1.4.1 Specification of GZF1900 –VH..........................................................................................3

1.4.2 Other Specification ...............................................................................................................3

1.5 INTERFACES......................................................................................................................................4

1.6 STRUCTURE ......................................................................................................................................5

1.6.1 Figure of Repeater................................................................................................................5

1.6.2 Figure of Side Panel.............................................................................................................5

1.6.3 Dimension..............................................................................................................................6

2. APPLICATIONS..................................................................................................................................6

3 INSTALLATION....................................................................................................................................8

3.1 INSTALLATION FLOW ........................................................................................................................8

3.2 PROJECT PREPARATIONS ...................................................................................................................9

3.2.1 User’s Cooperation...............................................................................................................9

3.2.2 On-site Survey.......................................................................................................................9

3.2.3 Installation Tools ...................................................................................................................9

3.2.4 Technical Documentation...................................................................................................10

3.3 INSTALLATION CONDITIONS............................................................................................................10

3.3.1 Basic Installation Conditions.............................................................................................10

3.3.2 Recommended Environment Requirements...................................................................10

3.4 EQUIPMENT CHECK ........................................................................................................................11

3.4.1 Counting the Goods ...........................................................................................................11

3.4.2 Unpacking Inspection.........................................................................................................11

3.5 INSTALLATION OF THE MAIN CHASSIS OF THE REPEATER ...............................................................12

4. SITE COMMISSIONING..................................................................................................................13

4.1 CONFIGURE THE SOFTWARE ...........................................................................................................13

4.1.1 Configure the Communication Server..............................................................................13

4.1.2 Configure the Monitor Software........................................................................................16

User Manual

1. General

1.1 System Frame

The following figure shows the system frame of GZF1900-VH repeater.

Power Supply

RF signal flow Monitoring signal flow Antenna

Modem

Monitor

& Battery

Door

Sensor

BTS

Reverse

Forward

LNA

BCS

PD PD

LNA

GZF1900-VH

(B40Y01JW02YF)

User Manual

1.2 Product Features

Excellent RF performance: FiberHome provides wireless repeaters with

state-of-the-art performance such as minimized noise figure, time delay and IMD,

excellent link balance and out-of-band suppression.

Modular design: Modular design is easier for operators to make upgrade and

maintenance.

Monitor and control (M&C): The interior M&C module is the core to control the whole

repeater and implements four functions: detection, control and communication.

Perfect query, statistic and report: It can support query, statistic and report for the

history data including log, repeater data and query data etc.

Reliability: Industrial-level components are used, which can sustain a temperature

range of -25°C ~ +55°C (for outdoor repeater only) so that the product can work

reliably in a wide range of environments; the power supply of the integrated system is

designed with high redundancy to make sure that the power module can work under

normal load in 55°C and start normally in -25°C; the repeater is provided with

multi-level lightning protection devices to ensure reliable lightning protection for the

power supply, antenna and feeder. The lightning protection device of the power supply

is a combination of a gas discharge tube and a piezo-resistor and is designed with

2-level protection, so that it can absorb very high lightning strike energy as well as

remove residual voltage satisfactorily.

User Manual

1.3 Hardware and Software Configuration Requirement

1.3.1 Computer Hardware

CPU primary frequency：1.8G or above, 256M memory or above, above 16M

graphic memory, 15" display with pixel of 800×600;

Options: 16-bit sound card, sound box, laser or jet printer.

1.3.2 Computer Software

If installing V5.1.0 (Local version), it is suggested to install Window2000/

XP/Window2003. It is necessary to install DirectX (8.0 or above) for

Window98/ME.

There is no special requirement for configuring communication server.

1.4 Technical Specification

1.4.1 Specification of GZF1900 –VH

Technical Specification

Uplink

Downlink

Frequency Band

1850 ~ 1910MHz

1930 ~ 1990MHz

Number of Band adjustable Modules

System Gain

90±2dB

Total Output Power

33±2dBm

40±2dBm

ATT Range in 1dB Step

0~25dB

Noise Figure

≤6dB

Pass Band Ripple

≤6dB

Group Delay

≤9μs

User Manual

Automatic Level Control

Within 2dB or shut off

Spurious

Emission(out

of working

band 2.5MHz

9kHz~1GHz/100kHz

≤-36dBm

1GHz~12.75GHz/1M

≤-30dBm

VSWR

≤1.5

1.4.2 Other Specification

MECHANICAL SPECIFICATION

Dimensions Approx.

513×462×232mm

Weight Approx.

17.4kg

Ingress Protection Class

IP65

ENVIRONMENT SPECIFICATION

Operating Temperature

-25 ～+55℃

Humidity

≤95%

OTHER SPECIFICATION

System Impedance

50Ω

RF Connector

N-type

Power Supply

AC 220V 45 ~ 65Hz

1.5 Interfaces

Antenna interface: N-type connector

Laptop interface: RS232

User Manual

1.6 Structure

1.6.1 Figure of Repeater

1.6.2 Figure of Side Panel

Tabla de contenidos

Otros manuales de Reloj de repetición de FiberHome

FiberHome

FiberHome GZF850-VL Manual de usuario

FiberHome

FiberHome GZF850-VH Manual de usuario

Manuales populares de Reloj de repetición de otras marcas

Gigaset

Gigaset 108 Manual de usuario

Ace TECHNOLOGY

Ace TECHNOLOGY USR-1900A Manual de usuario

Kenwood

Kenwood TKR-750-850 Manual de lista de piezas

Asus

Asus RP-AC51 Manual de usuario

Exibel

Exibel HRP0101 Manual de usuario

Kidde

Kidde Vega Manual de usuario

Telcosat

Telcosat RBB 850 Guía de instalación

York

York Universal LINC485 Manual de usuario

MIKOM

MIKOM MRx01B Power Series Manual de usuario

Simrad

Simrad RD 301 Manual de usuario

Tait

Tait TB7304 Manual de usuario

R-tron

R-tron RSN-CDMA-37-C Manual de usuario

Inventronics

Inventronics DALI REPEATER SO Manual de usuario

XFP

XFP 16 Manual de usuario

Andrew

Andrew MRx18 Manual de usuario

COMBA

COMBA RXA3748 Manual de usuario

ADRF

ADRF SDR-ICS-43 Manual de usuario

Teltonika

Teltonika WRP100 Manual de usuario