FHF FernTel 3 Manual de usuario
Weatherproof telephone
FHF BA 9620-62 07/14
Operating manual
FernTe l 3
Version 16 keys
without display Version without keys,
without display
Version 21 keys with display
Tabletop unit
2
Note
Please read the operating manual carefully before installing the device.
Please check the contents of the box for completeness.
Table of Contents
General operating notes.................................................................................... 4
Device overview / Dimensions........................................................................ 5
Device versions.................................................................................................... 5
Controls and indicators..................................................................................... 6
Version with keypad (21 keys) and display.......................................................... 6
Version with keypad (16 keys), without display.................................................... 7
Version without keypad, without display .............................................................. 7
As-delivered condition....................................................................................... 8
Box contents....................................................................................................... 8
Telephone presetting .......................................................................................... 8
Mounting and installing..................................................................................... 9
Wall version........................................................................................................ 9
Table version..................................................................................................... 1
Mounting the sling holder................................................................................... 11
Connection of a secondary sounder................................................................... 11
Version wit keypad (21 keys) and display....................................... 12
Operation ................................................................................................... 12
Seize (Make / answer a call) ........................................................................ 12
Receiver volume .......................................................................................... 12
Make a call .................................................................................................. 12
Short / Speed code dialling .......................................................................... 12
Number redial .............................................................................................. 12
Disconnect................................................................................................... 12
Enquiry call (dual-tone multifrequency only) ................................................. 12
Telephone book ........................................................................................... 12
Programming ............................................................................................. 13
Telephone book ........................................................................................... 14
Short / Speed code dialling .......................................................................... 14
Settings ....................................................................................................... 15
Ringing signal ........................................................................................ 15
Volume .................................................................................................. 15
Dialling mode ......................................................................................... 15
PBX ....................................................................................................... 15
As-delivered condition ............................................................................ 15
Menu ..................................................................................................... 15
Restrictions.................................................................................................. 16
Activate.................................................................................................. 16
None ................................................................................................ 16
Direct call ......................................................................................... 16
Operation and programming 12
3
Total lock ......................................................................................... 16
Telephone book ............................................................................... 16
Programming.................................................................................... 16
Direct call number .................................................................................. 16
PIN ........................................................................................................ 16
Version wit keypad (16 keys), wit out display.............................. 17
Operation................................................................................................. 17
Seize (Make / answer a call)...................................................................... 17
Amplified listening in receiver .................................................................... 17
Make a call ............................................................................................... 17
Last number redial .................................................................................... 17
Disconnect................................................................................................ 17
Enquiry call (dual-tone multifrequency only)............................................... 17
Programming .......................................................................................... 17
Allow settings modifications....................................................................... 17
Restrict settings modifications ................................................................... 18
Adjust ringing volume................................................................................ 18
Adjust the ringing melody .......................................................................... 18
Amplified listening in receiver, setting the levels ........................................ 18
Set dialling mode ...................................................................................... 19
Enter the exchange code........................................................................... 19
Delete the exchange code......................................................................... 19
Program pause following the exchange code............................................. 2
Program the Enquiry Key (flash time) ........................................................ 2
Restore to as-delivered condition .............................................................. 2
Change Personal Identification Number (PIN)............................................ 21
Signalling tones during programming ................................................... 21
Version wit out keypad and wit out display................................... 22
Operation................................................................................................. 22
Seize (Make / answer a call) and dialling ................................................... 22
Programming using device-internal
programming keypad ............................................................................. 22
Setting operating mode ............................................................................. 22
Enter speed code dialling number ............................................................. 22
Adjust ringing volume................................................................................ 22
Adjust the ringing melody .......................................................................... 23
Set dialling mode ...................................................................................... 23
Restore to as-delivered condition .............................................................. 23
Signalling tones during programming ................................................... 23
General information........................................................................................... 24
Service ............................................................................................................. 24
Care and maintenance..................................................................................... 24
Warnings and security information ................................................................ 24
Tec nical Data..................................................................................................... 25
EC Declaration of Conformity ........................................................................ 26
EMC-Directive ...................................................................................................... 26
4
General operating notes
1. The versions of FernTel 3 can be operated in the analogue, public telephone network
and connected to analogue terminals of branch exchanges.
2. The receiver is equipped with a leakage field spool for coupling of hearing aids. Users
of a hearing aid with inductive receiver may receive the signal from the receiver inset
directly.
3. The version without keypad does not offer you all the performance features available
in other versions.
4. The telephone has a receiver accommodation with a magnetic contact as hook
switch. To terminate an existing connection, the receiver must be replaced. For
disconnecting an existing connection, all you need to do is press the disconnect key
on the keypad.
5. When programming the settings, the handset must be off the hook. On the version
with 16 keys, you enter programming mode by simultaneously pressing the asterisk
and the hash key. For the version with 21 keys and a display, programming takes
place in the Select menu, which appears when the key is pressed.
6. If a procedure has been completed successfully, you will hear an acknowledgement
signal. An error tone informs you of any operating mistakes.
7. Should more than 2 minutes pass before you start dialling, the exchange may cut off
the power supply. The dial tone can no longer be heard. In this case you should put
the handset back on the hook and wait approximately 2 seconds before you lift it
again. Programming sessions that have been started, but have not been completed,
must be repeated.
8. If you get a call, the FernTel 3 rings with the volume and melody you have chosen.
The display version also signals the incoming call in the display.
9. Entering your personal identification number (PIN) you may partly or completely
restrict functions and settings. Forgetting your PIN can be compared to losing a key.
If you have forgotten your PIN, please contact our technical support service.
5
Device overview / Dimensions (mm / inc )
Device versions
The telephone FernTel 3 is available in three versions.
- with keypad (21 keys) and display
- with keypad (16 keys), without display
- without keypad, without display (with a device-internal programming keypad)
6
Controls and indicators
Version wit keypad (21 keys) and display
Keypad
Menu operations keys
Short / Speed code dialling
Disconnect
Last number redial
Enquiry key
________________________
Number keys
Display
The two uppermost lines display
numbers or the menu settings.
The lower line displays pictograms
that correspond to the functions.
Last number redial
Direct dialling
Dual-tone multifrequency (DTMF)
Pulse dialling
Menu operation
7
Version wit keypad (16 keys), wit out display
Keypad
Amplified listening in receiver
Disconnect
Last number redial
Enquiry key
________________________
Number keys
Version wit out keypad, wit out display
Device-internal programming keypad (12 keys)
123
456
789
* #
8
As-delivered condition
Box contents
The scope of the delivery includes:
- 1 telephone
- 1 telephone mount
- 1 handset accommodation for the table version with 2 screws
- 4 washers Ø 18 mm
- this operating manual
Telep one presetting
Valid for version
ABC
Dialling mode Dual-tone multifrequency (DTMF),
signal duration 9 ms
xxx
Enquiry key function (R key) Flash 12 ms xx
Exchange code none xx
Pause following exchange code 3 seconds xx
Last number redial memory Empty xx
Speed code dialling memory Empty x
x
x
Short code dialling memory
Mode key
Direct call memory
Empty
Speed code
Empty x
Restrictions Programming restricted xx
Amplified listening in receiver Two levels (6 dB / 12 dB) x
PIN xx
Ringing melody 7 xxx
Ringing volume 6 = max xxx
Receiver volume 1 = min, default value x
A) with keypad (21 keys) and display
B) with keypad (16 keys), without display
C) without keypad, without display (with a device-internal programming keypad)
Using the programming menu, you may reset this as-delivered condition at any time. The
PIN and the menu language, however, will not be altered by resetting.
9
Mounting and installing
Wall version
Fasten the telephone mount with 4 screws (2). Place the provided washers Ø 18 mm under
the screw head.
Place the telephone in the upper latches (A), swing it downwards until the lower latches
audibly engage (B).
Remove the keypad plate (6), and tighten the two locking screws (3) as far as they will go.
Important: This preserves the IP65 degree of protection.
Pull the telephone line through the cable gland (4) and connect it with terminal (5) TCP/La -
TCP/Lb (TCP : Terminal Connection Point).
Use cables with a sheath diameter of 5 to 9 mm only, otherwise the IP65 degree of
protection can not be guaranteed.
Bore
illustration
(not to scale)
1
Plug the ribbon cable onto the pin contact strip (7) of the keypad plate.
Tighten the keypad plate (6) using four screws (8).
Table version
Place the telephone in the lower latches (A), swing it backwards until the upper latches
audibly engage (B).
Pull the telephone line through the cable gland (4) and connect it with terminal (5) TCP/La -
TCP/Lb.
Use cables with a sheath diameter of 5 to 9 mm only, otherwise the IP65 degree of
protection can not be guaranteed.
The standard handset accommodation (for the wall version) (9) can be replaced for the table
version.
After loosening the two screws (12) on the bottom of the keypad plate you can remove the
standard handset accommodation.
Fasten the table version handset accommodation (11) to the keypad plate by using the
included screws (12).
Plug the ribbon cable onto the pin contact strip (7) of the keypad plate. Tighten the keypad
plate (6) using four screws (8).
Lay the telephone cord according to the instructions, in order to prevent accidents.
Otros manuales para FernTel 3
1
Tabla de contenidos
Otros manuales de Teléfono de FHF
