Festo CPX-P Manual de usuario

Modular electrical terminal CPX-P

Subject to change – 2018/04

2èInternet: www.festo.com/catalogue/...

Terminal CPX-P

Key features

Installation concept Electrical components Assembly Operation

Economical from the smallest

configuration up to the maximum

number of modules

Up to 9 electrical input/output

modules plus bus nodes and

pneumatic interface/electronics

modules for valves

Extensive range of functions and

connection options for the electrical

modules

Choice of connection technology for

technically and economically

optimised connections

Can be used as a dedicated remote

I/O module

High operating voltage tolerance

(±25%)

Open to all fieldbus protocols and

Ethernet

IT services and TCP/IP such as

remote maintenance, remote

diagnostics, web server, text

message and e-mail alert

Digital inputs and outputs,

4-/8-/16-way, optionally available

with individual channel diagnostics

Analogue inputs and outputs,

2-/4-way

Analogue inputs and outputs with

HART protocol

Input modules for connecting

NAMUR sensors

IP65 or IP20

Wall or H-rail mounting, also on

mobile units

Conversions/extensions are

possible at any time, individual

linking

Modular system offering a range of

configuration options

Fully assembled and tested unit

Lower selection, ordering, assembly

and commissioning costs thanks to

the central CPX-P terminal

Choice of pneumatic components

for optimised control loop system

design

Fast troubleshooting thanks to an

extensive selection of LEDs (some of

which are multi-coloured) on the

bus node and on all I/O modules

Supports module and channel-

oriented diagnostics

On-the-spot diagnostics in plain

text via operator unit (CPX-MMI)

Fieldbus/Ethernet remote

diagnostics

Innovative diagnostic support with

integrated web server/web monitor

or maintenance tool (CPX-FMT) with

USB adapter (NEFC) for PC

Optimised commissioning thanks

to parameterisable functions

Reliability of service with connec

tion blocks and modules that are

quick to replace without changing

the wiring

2018/04 – Subject to change 3

èInternet: www.festo.com/catalogue/...

Terminal CPX-P

Key features

Variants for controlling the CPX-P terminal (with bus node, without preprocessing)

Bus node

Different bus nodes are used to

integrate the terminal in the control

systems of various manufacturers.

The CPX-P terminal can therefore be

operated on commonly used fieldbus

systems:

PROFIBUS DP

PROFINET

DeviceNet

Integration in universal networks

based on Ethernet opens up new

possibilities. Faster data transmis

sion, real-time capability and above

all additional IT services such as file

transfer, web server, web monitor as

integrated website in the CPX-P

terminal, text message/e-mail alerts,

etc. open up a wide range of

synergies.

These include standardised and

universal communication technology

across all areas, including operating

level, management level and field

level in the production environment,

with protection to IP65.

The following protocols are supported:

EtherNet/IP

Modbus/TCP

PROFINET

Bus node Industrial Ethernet bus node

PLC

Fieldbus

Web

IT services:

E-mail

File transfer

PLC

Industrial Ethernet

Communication with higher-order

controller via fieldbus

No preprocessing

Fieldbus protocol dependent on

CPX bus node used

Up to 90 I/Os, depending on the

bus node used

Connection to a higher-order

controller directly via EtherNet/IP,

Modbus/TCP or PROFINET

No preprocessing

Monitoring via Ethernet and web

applications

Up to 300 I/Os

-H- Note

Every electrical connection can be

combined with an appropriate

number of I/O modules and/or

pneumatic components, depending

on its address capacity.

Likewise, every pneumatic variant of

the CPX-P terminal can be operated

with every electrical connection

variant.

Subject to change – 2018/04

4èInternet: www.festo.com/catalogue/...

Terminal CPX-P

Key features

Connection of inputs and outputs to the CPX-P terminal

Digital and analogue CPX I/O modules Electrical connection

The connection technology for

sensors and additional actuators

offers a wide range of digital and

analogue input and output modules

and is freely selectable – as

appropriate to your standard or

application.

The input/output modules can be

combined as required with the

connection blocks:

M12, 5-pin

M12, 5-pin, with quick lock and

metal thread

M8, 3-pin

M8, 4-pin

Sub-D, 25-pin

Harax®, 4-pin

CageClamp®

(with cover also to IP65/67)

Screw terminal and spring-loaded

terminal

CPX modules for NAMUR sensors Electrical connection

The electronics modules for NAMUR

sensors can only be combined with

certain connection blocks.

The input modules can be combined

as required with the connection

blocks:

M12, 4-pin

Screw terminal and spring-loaded

terminal

CPX modules for NAMUR sensors, intrinsically safe circuits for ATEX applications

PLC

Fieldbus

1Higher-order controller

2Non-ATEX zone; non-intrinsic

ally safe circuits are permitted

3ATEX zone; only intrinsically

safe circuits are permitted

4CPX input module for NAMUR

sensors, non-intrinsically safe

design

5CPX input module for NAMUR

sensors, intrinsically safe

design

6Actuator/machine component

with NAMUR sensors

CPX-P modules are suitable for con

figuring intrinsically safe or non-in

trinsically safe circuits depending

on the design selected.

This enables components from both

safe and hazardous zones to be

connected to the CPX-P terminal.

The components for the intrinsically

safe zone are marked in blue or

entirely coloured blue to distinguish

them visually.

-H- Note

Intrinsically safe circuits are circuits

which release so little energy during

operation, or in the event of certain

faults under specified test condi

tions, that no ignition can occur in a

particular potentially explosive

atmosphere.

2018/04 – Subject to change 5

èInternet: www.festo.com/catalogue/...

Terminal CPX-P

Key features

Pneumatic variants of the CPX-P terminal

With valve terminal MPA-S – centralised

The electrical CPX-P terminal is a

modular peripheral system for valve

terminals.

The system is specifically designed

so that the valve terminal can be

adapted to suit different

applications.

The modular system design lets you

configure the number of valves,

inputs and additional outputs to

suit the application.

Ordering

The CPX-P terminal with valve

terminal is fully assembled according

to your order specifications and

individually tested. The finished valve

terminal consists of the electrical

peripherals including the desired

actuation and the selected

components from the MPA-S modular

system.

The CPX-P terminal with valve ter

minal is ordered using two separate

order codes. One order code defines

the electrical peripherals type CPX-P,

while the other specifies the

pneumatic components of the valve

terminal.

The electrical peripherals type CPX-P

can also be configured without a

valve terminal and can be used on a

fieldbus. For this order, only the order

code for the electrical peripherals is

required.

The order lists for the pneumatic

components can be found on

èInternet: mpa-s

(valve terminal MPA-S)

Subject to change – 2018/04

6èInternet: www.festo.com/catalogue/...

Terminal CPX-P

Peripherals overview

Complete overview of modules

End plate Bus node Control block Input/output modules

Mounting holes for wall mounting

Functional earth connection

Fieldbus/Industrial Ethernet

connection using various types of

connection technology

Setting of fieldbus parameters via

DIL switch

Display of fieldbus and peripheral

equipment status via LED

Remote unit CPX-CEC

Connection via Ethernet TCP/IP or

Sub-D programming interface

Setting of operating modes via DIL

switch and program selection via

rotary switch

Combination of

Interlinking block

Electronics module

Connection block

Operator unit

Connection to bus nodes or control

block

Display and modification of

parameter settings

Plain-text display for texts,

messages (e.g. individual channel

diagnostics, condition monitoring),

menus, etc.

2018/04 – Subject to change 7

èInternet: www.festo.com/catalogue/...

Terminal CPX-P

Peripherals overview

Complete overview of modules

Input/output modules Pneumatic interface

1Interlinking block 2Electronics module 3Connection block

Internal linking of the power supply

and serial communication

External power supply for the entire

system

Additional power supply for outputs

Connection accessories for 7/8"

Individual linking with M6 screws,

individually expandable

Digital inputs for connecting the

sensors

Digital outputs for activating

additional actuators

Analogue inputs

Analogue outputs

Choice of connection technology

Protection class IP65 or IP20

Can be combined with the

electronics modules

Connection accessories for

M8/M12/Sub-D/quick connector,

etc.

M8/M12/Sub-D, etc. connecting

cables

Modular system for connecting

cables

MPA-S

Subject to change – 2018/04

8èInternet: www.festo.com/catalogue/...

Terminal CPX-P

Peripherals overview

Individual overview of modules

Bus node è66

Bus node for

PROFIBUS DP

DeviceNet

EtherNet/IP

(integrated web server)

PROFINET

(integrated web server)

Plastic connection block Metal connection block

Direct machine mounting

(connection block to IP65/IP67)

M8-3POL

M8-4POL

M12-5POL

M12-5POL quick lock, metal thread

screened

Sub-D

Quick connector

Spring-loaded terminal with cover

Protected fitting space

(protection class IP20)

Spring-loaded terminal

Screening concept

Optional screening plate for con

nection block with M12 connection

technology

Direct machine mounting

(connection block to IP65/IP67)

M12-5POL

Digital electronics module for inputs/outputs è62 Analogue electronics module for inputs/outputs è66

Digital inputs

8 digital inputs

16 digital inputs

Digital outputs

4 digital outputs (1 A per channel,

individual channel diagnostics)

8 digital outputs (0.5 A per chan

nel, individual channel diagnostics)

Analogue inputs

4 analogue inputs

(1 … 5 V, 0 … 10 V, –5 … +5 V,

–10 … +10 V, 0 … 20 mA,

4 … 20 mA, –20 … +20 mA)

4 analogue inputs with HART

protocol

Analogue outputs

2 analogue outputs

(0 … 10 V DC, 0 … 20 mA,

4 … 20 mA)

4 analogue outputs with HART

protocol

2018/04 – Subject to change 9

èInternet: www.festo.com/catalogue/...

Terminal CPX-P

Peripherals overview

Individual overview of modules

Connection block for NAMUR sensors and HART input/output module Digital electronics module for NAMUR sensors è53

Direct machine mounting

(connection block to IP65)

M12-4POL

Protected fitting space

(connection block to IP20)

Screw terminal

Spring-loaded terminal

Digital inputs

8 digital inputs for NAMUR sensors

or wired mechanical contacts

Intrinsically safe design with

additional protection measures in

the event of failure

Metal interlinking block – Individual linking è86

System linking

Different voltage values for

supplying the modules

Serial communication between the

modules

System supply

7/8", 5-pin

In addition to system linking, power

supply for the

electronics plus sensors (8 A)

valves plus actuators (8 A)

Additional power supply

In addition to system linking, power

supply for the

actuators (8 A per supply)

Expandability

Can be expanded as required by

up to 10 interlinking blocks

-H- Note

The 7/8" supply is subject to the

following restriction due to the

available accessories:

5-pin 8 A

Pneumatic interface MPA-S è92 End plate

Valve terminal

MPA1 (360 l/min)

MPA2 (700 l/min)

Up to 128 solenoid coils

Up to 16 modules can be

configured

End plate

Left-hand

Right-hand (for use without valves)

Subject to change – 2018/04

10 èInternet: www.festo.com/catalogue/...

Terminal CPX-P

Peripherals overview

General basic data and guidelines

Max. 11 modules in total:

One bus node and/or one control

block

Up to 9 additional input/output

modules

In addition a pneumatic interface

– Always positioned as the last

module on the right-hand side

– 16 MPA modules can be

configured

Address capacity max. 512 inputs

and 512 outputs, depending on

bus node or control block

One interlinking block with system

supply

Multiple interlinking blocks with

additional power supply, always

positioned to the right of the inter

linking block with system supply

The connection blocks can, with a

few exceptions, be combined with

the electronics modules for inputs/

outputs (ètable below)

The electronics modules for inputs/

outputs can be combined with

various interlinking blocks

Combination of connection blocks and electronics modules for inputs and outputs

Digital electronics modules

For inputs For outputs For NAMUR sensors

CPX-8DE CPX-8NDE CPX-16DE CPX-4DA CPX-8DA CPX-P-8DE-N CPX-P-8DE-N-IS

Connection blocks, plastic design

CPX-AB-8-M8-3POL n n –n n – –

CPX-AB-8-M8X2-4POL – – n n n – –

CPX-AB-4-M12x2-5POL n n –n n – –

CPX-AB-4-M12x2-5POL-R n n –n n – –

CPX-P-AB-4XM12-4POL – – – – – n–

CPX-P-AB-4XM12-4POL-8DE-N-IS – – – – – – n

CPX-AB-8-KL-4POL n n n n n – –

CPX-P-AB-2XKL-8POL – – – – – n–

CPX-P-AB-2XKL-8POL-8DE-N-IS – – – – – – n

CPX-AB-1-SUB-BU-25POL n n n n n – –

CPX-AB-4-HAR-4POL n n –n n – –

Connection blocks, metal design

CPX-M-AB-4-M12X2-5POL n n –n n – –

Combination of connection blocks and electronics modules for inputs and outputs

Analogue electronics modules

CPX-4AE-U-I CPX-2AA-U-I CPX-4AE-4AA-H -V-

Connection blocks, plastic design

CPX-AB-4-M12x2-5POL n n –

CPX-AB-4-M12x2-5POL-R n n –

CPX-AB-8-KL-4POL n n –

CPX-AB-1-SUB-BU-25POL n n –

CPX-P-AB-4XM12-4POL – – n

CPX-P-AB-2XKL-8POL – – n

Connection blocks, metal design

CPX-M-AB-4-M12X2-5POL n n –

-V- New

CPX-4AE-4AA-H

Otros manuales de Terminal táctil de Festo

Festo

Festo CPA VI-MP Series Manual de lista de piezas

Festo

Festo CDSA-D3-RV Manual de usuario

Festo

Festo MPA-F Series Manual de usuario

Festo

Festo CPV-SC Series Manual de lista de piezas

Festo

Festo CPX-FB38 Manual de usuario

Festo

Festo CPV-GE-DN3-8 Series Manual de usuario

Festo

Festo VTEM Instrucciones de funcionamiento e instalación

Festo

Festo VTSA-F-CB Manual de usuario

Festo

Festo CPV-GE-CC-8 Series Manual de lista de piezas

Festo

Festo CPX-CM-HPP Manual de usuario

Festo

Festo CPV GE-CO2-8 Series Manual de lista de piezas

Festo

Festo CDSA-D3-RV Manual de instrucciones

Festo

Festo VTUB-12-V Manual de lista de piezas

Festo

Festo VTSA-ASI 4E4A-Z Series Manual de lista de piezas

Festo

Festo CPX-FB33 Manual de usuario

Festo

Festo CDVI-DN Manual de usuario

Festo

Festo NAW VDMA-02 Series Manual de lista de piezas

Festo

Festo CPX-SF34 Manual de lista de piezas

Festo

Festo CPV Series Manual de usuario

Festo

Festo CPV -GE-DN2-8 Manual de usuario

Festo

Festo CPV E ASI-4E4A Series Manual de lista de piezas

Festo

Festo CDVI-DN Instrucciones de funcionamiento e instalación

Festo

Festo CPX Manual de usuario

Festo

Festo CPA Series Manual de lista de piezas

Manuales populares de Terminal táctil de otras marcas

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manual de usuario

Ingenico

Ingenico AXIUM EX4000 Manual de usuario

Heisei Electronics

Heisei Electronics Q-POS 815 Manual de usuario

Amano

Amano MTX-15 Manual de usuario

FLOWBIRD

FLOWBIRD CWT Compact Touch Manual de usuario

Demco

Demco SP7 Manual de usuario

Lathem

Lathem PC600 Series Manual de usuario

Partner

Partner MF-2352 Manual de usuario

NCR

NCR RealPOS 7460-2 Manual

Simrad

Simrad MS50 Instrucciones de montaje

Unitech

Unitech MR350 MKII Guía de inicio rápido

Jungheinrich

Jungheinrich WMT 210 Manual de usuario

Motorola

Motorola MTP850 Manual de usuario

YASKAWA

YASKAWA 62H-MDC0 Manual de usuario

MVG industries

MVG industries NeptuLink Manual de usuario

Price Industries Limited

Price Industries Limited FDC Manual de instrucciones

Honeywell

Honeywell TemaKey Manual de usuario

EBN

EBN BPC65-B-A16G Manual de usuario