Fermax VDS Smile Monitor Manual de usuario

ENGLISH

VDS SMILE MONITOR

USER’S MANUAL

Cod. 97729bIUSR V08_15

Page 33

SMILE VDSSMILE VDS

SMILE VDS

SMILE VDSSMILE VDS

SMILE VDS

Section II - User Manual

Congratulations on purchasing this quality product!

The Smile Video Door Entry System is hands-free and with a full colour screen

that allows you to communicate with the entry panel, see the caller and open the

entrance door if you wish.

Thanks to its on-screen menu new features are included for configuring the

monitor´s parameters.

We hope you enjoy its range of functions.

www.fermax.com

Page 34

SMILE VDSSMILE VDS

SMILE VDS

SMILE VDSSMILE VDS

SMILE VDS

SMILE MONITOR

Buttons

Audio and Hang-up Activation Button.

· Upon receiving a call, (the user has 30" seconds to answer before returning to standby.

During this time the blue led audio button will blink to report a pending call to answer),

press this button to talk to the guest. The audio channel is opened from street to

residence, (the blue led on the audio button lights up steadily to indicate that it is

in a conversation with the street and anything said will be heard here), this

works with handsfree.

· Press to complete the communication, (upon completion the blue led audio light

turns off again). The monitor´s default internal timer is 90 seconds.

Notes:

- The conversation is private, no other terminal can hear it.

- "Handsfree" mode is default mode.

- While the audio channel is open the input audio can be regulated. See the

corresponding chapter on: "Audio Adjustments."

- If the monitor is configured with the conversation in "simplex mode," press the

audio button to talk and release it to listen, (upon receiving the call, the blue led

audio button will blink to report a pending call to answer), uonce we open the channel

we will have audio in the monitor direction (the blue led audio will remain lit), cuando

pulsamos el botón de audio cambiaremos el sentido de la comunicación. when

we press the audio button we will change the communication direction. The icon

will indicate the channel we have activated at each moment (upper right corner of

the monitor). The input channel volume is always adjustable during the

conversation.

Wildcard

Lock-

releases

Audio

1 1

Page 35

SMILE VDSSMILE VDS

SMILE VDS

SMILE VDSSMILE VDS

SMILE VDS

Wildcard button: Auto-start / Main-secondary camera selection.

· With the monitor on standby, press and hold the wildcard for 1 second to

switch the monitor on manually. To activate the audio button, press the audio

activation button .

· With video, press and hold this button for 2 seconds to sequentially select

between the main camera and the secondary camera (where one exists).

Notes:

- The wildcard button by default is for autostart, (even though you can

program it with another function, ask your installer.

- If the channel is busy an error tone "BEEP" will be generated and auto-start

will not activate, nor will the call to the guard.

- The auto-start function is always used on the main panel except where a call

is received on the secondary panel. Once the conversation is over auto-

start will activate on the secondary panel for 30 seconds. After this time it will

activate on the main panel.

- In this case auto-start can be performed by the:

o Wirdcard button or

oBy pressing the shortcut button or

oBy selecting the icon of the auto-start function on the menu.

ViatheMENU.

(Pressing "Menu" for 3 seconds ). With shortcut buttons.

(Short press "Menu" ).

- There is a function configured by the installer to activate the audio channel

automatically upon receiving the call. In this mode the conversation will finish

as usual by pressing the AUDIO button or after 90’’.

Note:

- Function assigned by the installer. Consult the installer.

Button Menu: Adjustments and configuration.

· In order to access the Administrator menu, from which you can configure the

monitor, according to the installation’s needs and the user menu, from which

you can access the user´s customised settings.

Page 36

SMILE VDSSMILE VDS

SMILE VDS

SMILE VDSSMILE VDS

SMILE VDS

Lock Releases / Call Guard Unit Button.

· Pressing this button whilst communicating with the Entry Panel will activate the lock

release.

Note: The icon will indicate the channel activated at each moment (upper right

corner of the monitor).

· Pressing this button whilst the monitor is on standby will result in a call being made

to the guard unit (where one exists).

Note: If the channel is busy an error tone "BEEP" will be generated and the call to

the guard will not be made.

·The option of activating an output terminal (F2), once the lock-release is activated.

This output remains active while pressing the button.

Note:

- Function assigned by the installer. Consult the installer.

Buttons for Additional Functions.

Note:

- Function assigned by the installer. Consult the installer.

- They can be activated:

oBy pressing the shortcut button or

oBy selecting the icon of the auto-start function on the menu..

F1-F2

Door lock-release

When a call is received from the entry panel, you

can open the door at any time, by pressing the

button .

Operation

Page 37

SMILE VDSSMILE VDS

SMILE VDS

SMILE VDSSMILE VDS

SMILE VDS

Answering a call:

"Handsfree" mode:

When the call button on the Entry panel is

pressed a call tone is produced both on the

panel and on the monitor, causing the screen

to start up.

Press the button to speak with the visitor. The

audio channel between the street and the home will

be opened, operating in hands-free mode. The

communication facility will automatically terminate

after 90 seconds, or at any time by pressing the

button .

The led will remain on (blue) for the duration of

the conversation.

If communication is not established with the entry

panel, the monitor will automatically go off after

30 seconds.

While in simplex conversation mode (press

the button to speak and release to listen).

When the call button on the Entry panel is

pressed a call tone is produced both on the

panel and on the monitor, causing the screen

to start up. Press the button to speak to the

visitor, leaving the upload audio channel activated.

From this point every time you press the button

the output audio channel will activate and upon

releasing it the input audio channel is

reactivated, the operationisinsimplexmode.The

communication will automatically end after 90

seconds, or at any time by pressing the button

.The icon will indicate the channel we have

activated at each moment (upper right corner ot the

monitor).

If communication is not established with the entry

panel, the monitor will automatically go off after 30

seconds.

Page 38

SMILE VDSSMILE VDS

SMILE VDS

SMILE VDSSMILE VDS

SMILE VDS

Manual Monitor Activation (Auto-Start)

With the monitor on standby, press and hold the

wildcard for 1 second to switch the monitor on

manually. to sequentially select between the main

cameraand the secondary camera (whereone exists),

press and hold the wildcard button for 2 seconds.

To activate the audio and speak to the visitor or open

the door, follow the steps above.

If communication is not established with the entry pa-

nel, the monitor will automatically go off after 30

seconds.

Notes:

- The wirldcard button by default is for

autostart, (even though you can program it

with another function, ask your installer.

- Auto-start can be performed:

o Wildcard button or

oBy pressing the shortcut button or

oBy selecting the icon of the auto-start

function on the menu.

ViatheMENU.

(Pressing "Menu" for 3 seconds ). With shortcut buttons.

(Short press "Menu" ).

Note: When communicating or only with video, pressing the Menu button twice displays

the shortcut buttons.

Page 39

SMILE VDSSMILE VDS

SMILE VDS

SMILE VDSSMILE VDS

SMILE VDS

PROGRAMMING:USERMenu

Access the user menu

1º. To access the USER menu. Press "Menu" for 3 seconds . The following screen is

viewed, The do not disturb option appears by default (white line under the icon), select

the tool icon via the cursors to access the User menu screen. The selected option is

displayed with the white line under the icon. Press , and a screen appears to access

the User menu.

to access the screen

CONFIGURATION menu

The icons viewed on the screen

(navigation buttons: , , y ), are

managed with the corresponding

capacitive buttons located on the monitor.

Capacitive buttons

Navigation buttons

:Return to the previous screen or stand-by.

: Select the previous menu option.

: Mark the following menu option.

: Confirm the selection and activate the function.

- Navigation buttons and capacitive buttons

Note:

a b

3º. Once the installer has accessed the

configuration menu screen, the screen

options appear, (use the cursor to move

them).

Page 40

SMILE VDSSMILE VDS

SMILE VDS

SMILE VDSSMILE VDS

SMILE VDS

a) Ringtones

Within the menu, the monitor allows you to select an independent ringtone for the call

from:

- a1) Main street panel.

- a2) Secondary street panel.

- a3) Doorbell.

You can select that the ringtone rings three times (continuous mode). We can also adjust

the volume.

1. Select the origin of the call with the cursors

, (panel 1, panel 2 or door bell). For

example panel 1 (white line under the

icon). Press , you access the ringtone.

2. Within the ringtone (white line under the

icon), if you press , you change and

listen to the different ringtone.

3. For example we press , and hear

ringtone 2 and we see that the ringtone

number has changed to number 2. This

is then the newly selected ringtone.

4. If you want the ringtone to ring three times

(continuous mode), press , to select

continuous mode (white line under the

icon).

Page 41

SMILE VDSSMILE VDS

SMILE VDS

SMILE VDSSMILE VDS

SMILE VDS

5. Having selected continuous mode, press

to select it. In order to remove the

selection you also press .

To go to the next options press .

continuos mode selected: the ringtone is placed 3

times

Audio adjustments

To regulate the volume.

1. Select the audio adjustments option via

the cursors (white line under the icon) and

press . The following screen appears:

Note:

- You will exit the audio adjustments option after 60 seconds.

Otros manuales para VDS Smile Monitor

Tabla de contenidos

Otros manuales de Sistema de intercomunicación de Fermax

Fermax

Fermax DUOX PLUS WIFI VEO XS MONITOR Guía del usuario

Fermax

Fermax DT591 Manual de usuario

Fermax

Fermax PROXIMITY READER MINI WG Manual de usuario

Fermax

Fermax KIT VIDEOCHALET CITYMAX Manual de usuario

Fermax

Fermax 1455 Manual de usuario

Fermax

Fermax 4+N MARINE Series Guía del usuario

Fermax

Fermax 97085b Manual de usuario

Fermax

Fermax City Max ADS Manual de usuario

Fermax

Fermax VIDEO DIGITAL COLOR KIT Manual de usuario

Fermax

Fermax LOFT VDS Manual de usuario

Fermax

Fermax 1-2L VDS KIT VIDEO OUTDOOR PANEL Manual de usuario

Fermax

Fermax MEET MILO 1W PANEL Guía del usuario

Fermax

Fermax FVQ-6040APP KIT Guía del usuario

Fermax

Fermax CM-204 Manual de usuario

Fermax

Fermax BUS 3 PALACE Manual de usuario

Fermax

Fermax DUOX CITYLINE VEO XS Manual de usuario

Fermax

Fermax CITYLINE VDS-BUS2 Guía del usuario

Fermax

Fermax LOFT 4+N Manual de usuario

Fermax

Fermax DUOX PLUS VEO MONITOR Manual de usuario

Fermax

Fermax LOFT Extra DUOX Manual de usuario

Fermax

Fermax 2235 Manual de usuario

Fermax

Fermax LOFT 4+N Manual de usuario

Fermax

Fermax MEMORY 4+N LOFT COMPACT Manual de usuario

Fermax

Fermax House Keeper Manual de instrucciones

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

CyberData

CyberData 011211 series Manual

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Aiphone

Aiphone IE-8MD Manual de usuario

Perel

Perel EDB4 Manual de usuario