Ferm Rink Dining Table Manual de usuario
Assembly manual
Rink Dining Table
General Instructions
PLEASE READ BEFORE INSTALLATION
ATTENTION:
High-gloss is a sensitive surface. Do not put anything directly on the table top.
Always use coasters or other protective items with a soft surface
Needed Tools
Box Content
1 x Table top
1 x Left side leg
1 x Right side leg
1 x Middle rail
4 x Brown pad
4 x Screw (A)
4 x Nut 16 x Screw (B)
4 x Cross nut 16 x Spring washer
16 x Flatwasher 1 x Allen key
4 x Wood dowel
Screwdriver Crosshead
2 3
1 2
Assembly ProcessAssembly Process
Install 2x brown pads on the
bottom of each table legs.
Mount 2x screws and 2x wooden dowel
on the side of each table legs.
x 2
x 2
4 5
3 4
Assembly ProcessAssembly Process
Mount the middle rail to each side legs and screw the
4x connector (nut and cross nut) in the rail.
Assembly the full leg and middle rail to the table top.
Screw 8x screws with 1x spring washers and 1x flat washers each into the tabletop.
6 7
fermliving.com
Tabla de contenidos
Otros manuales de Mobiliario de interior de Ferm
Ferm
Ferm Slope Storage Bench Manual de usuario
Ferm
Ferm Sill Cupboard Tall Manual de usuario
Ferm
Ferm Sill Cupboard Low Manual de usuario
Ferm
Ferm Haze Sideboard Manual de usuario
Ferm
Ferm FLYING SPHERE Manual de usuario
Ferm
Ferm UP STEP STOOL Manual de usuario
Ferm
Ferm Sill Wall Cabinet Manual de usuario
Ferm
Ferm PEKA Manual de usuario
Ferm
Ferm LITTLE ARCHITECT BENCH Manual de usuario
