Fein BOS 16 Guía de configuración
BOS 16; BOS 16-2
Repair instructions
C-SC_CSSM
Version 1.0
13.11.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Page 1of 55
BOS 16; BOS 16-2
Contents
C-SC_CSSM
Version 1.0
13.11.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page 2of 55
1. Models described
2. Technical data
3. Notes and requirements
4. Tools required
5. Lubricants and auxiliary substances required
6. Disassembly
7. Assembly
8. Troubleshooting
9. Connection diagram
BOS 16; BOS 16-2
1. Models described
C-SC_CSSM
Version 1.0
13.11.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page 3of 55
These instructions describe how to repair the following models:
Model Order number
BOS 16 7 205 47 00 23 0
BOS 16-2 7 205 49 00 23 0
BOS 16; BOS 16-2
2. Technical data
C-SC_CSSM
Version 1.0
13.11.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page 4of 55
Technical data
The complete technical data can be found in the operating instructions for the model.
Test data
Up-to-date test data for all models can be found on the FEIN Extranet (Customer Service → Repair Guides).
Lubricants
The lubricants and container sizes available from FEIN can be found on the FEIN Extranet (Customer Service → Repair Guides).
Lists of spare parts
Lists of spare parts and exploded views are available online at www.fein.com
BOS 16; BOS 16-2
3. Notes and requirements
C-SC_CSSM
Version 1.0
13.11.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page 5of 55
Note
These instructions are only intended for persons with suitable technical training. It is assumed that the reader has mechanical and
electrical training.
Only use original FEIN spare parts!
Provisions
Please note that power tools may only be repaired, maintained and checked by a trained electrician, as improper repair can result in
serious risks to the user.
The provisions set out in DIN VDE 0701-0702 should be observed after repairs.
The relevant accident prevention regulations of the employers' liability insurance associations are to be observed when
commissioning.
The German Equipment and Product Safety Act applies for correct use.
Outside Germany, the regulations applicable in the relevant country must be observed!
BOS 16; BOS 16-2
4. Tools required
C-SC_CSSM
Version 1.0
13.11.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page 6of 55
Standard tools
Special tools
Torx T15; T20 Drawing-off socket cap 6 41 04 150 00 8
Open-ended spanner, size 17 (sanded) 6 29 03 002 00 9 Assembly aid 6 41 22 121 01 0
Socket wrench, 10 mm Chuck cone, 19 mm 6 41 07 019 00 7
Plastic hammer 26 mm chuck cone 6 41 07 026 00 0
Arbor press
Long-nosed pliers
2x slotted screwdriver
Inner puller 10 mm
Slide hammer
Circlip pliers
Sleeve 7 mm inner diameter
Sleeve 17 mm inner diameter
Sleeve 20 mm inner diameter
24 mm outer diameter
Sleeve 22 mm inner diameter
Sleeve 21 mm inner diameter
37 mm outer diameter
BOS 16; BOS 16-2
4. Tools required
C-SC_CSSM
Version 1.0
13.11.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page 7of 55
Standard tools
Sleeve 25 mm inner diameter
35 mm outer diameter
Sleeve 38 mm inner diameter
43 mm outer diameter
Ball bearing support 8 mm inner diameter
Ball bearing support 11 mm inner diameter
BOS 16; BOS 16-2
5. Lubricants and auxiliary substances required
C-SC_CSSM
Version 1.0
13.11.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page 8of 55
Lubricants
Grease 0 40 11 301 00 5 30 g Gearbox
BOS 16; BOS 16-2
6. Disassembly
C-SC_CSSM
Version 1.0
13.11.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page 9of 55
Disassembling handle
1. Unscrew handle (1).
2. Pull off sleeve (2).
3. Remove screw (3).
4. Pull off locking ring (4).
1
2
3
4
BOS 16; BOS 16-2
6. Disassembly
C-SC_CSSM
Version 1.0
13.11.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page 10 of 55
Disassembling quick-clamping drill chuck
1. Unscrew quick-clamping drill chuck (1). Tools:
- Socket wrench, 10 mm
- Open-ended spanner,
size 17 (sanded)
1
Otros manuales para BOS 16
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Perforar de Fein
Fein
Fein ASq 658 Manual de usuario
Fein
Fein AKBU 35 PMQ Series Manual de usuario
Fein
Fein ASKEU 636 Kin Manual de usuario
Fein
Fein ASz648a Manual de instalación y operación
Fein
Fein ASCM12 Manual de usuario
Fein
Fein KBM 50 Q Manual de usuario
Fein
Fein ASCM18QM Series Manual de usuario
Fein
Fein DS 648 Manual de usuario
Fein
Fein ASzx 648 Manual de usuario
Fein
Fein BOP6 Manual de usuario
Fein
Fein KBE30 Guía de configuración
Fein
Fein ABSU12W4 Manual de usuario
Fein
Fein kbb38x Guía de configuración
Fein
Fein ASzx 736 Manual de usuario
Fein
Fein KBE 52-2 M Guía de configuración
Fein
Fein ASCT18 Manual de usuario
Fein
Fein KBB40X Manual de usuario
Fein
Fein HandyMaster ABS 14V Guía de inicio rápido
Fein
Fein BOP 6 Guía de configuración
Fein
Fein BOS 16 Manual de usuario
