FCI PETROSENSE PHA-100Plus Guía de configuración

992041, Release 1.3

January 12, 2011

FCI E

NVIRONMENTAL,

“The Technology Advantage”

PETROSENSE®

PHA-100Plus - Porta le Hydrocar on Analyzer

Training Guide

992041

Release 1.3

January 12, 2011

13111 N Central Expressway Suite 440, Dallas,TX 75243

(214) 483-1003 Fax: (214) 575-7936

992041, Release 1.3

January 12, 2011

CONGRAT LATIONS!

You have chosen the world’s most practical porta le hydrocar on analyzer,

the

PetroSense® (PHA-100Plus)

The technology and the hardware components incorporated into the

PetroSense® Analyzer have een successfully operating in the field for

years. If you have any questions, please feel free to call us.

Reminder: The PetroSense® Analyzer is a precise analytical instrument.

Although it is constructed for use in typical field conditions, the equipment

should e treated with reasona le care and regular maintenance to o tain

the est performance.

If you need assistance:

Call: (214) 483-1003

Hours: 9:00 a.m. – 5:00 p.m. (Eastern Standard Time) –

Monday through Friday.

Ask for PetroSense® (PHA-100Plus) customer service.

To save time, have the serial num er of the analyzer unit,

the pro e, and your student ID num er (received at training).

Fax: (214) 575-7936

E-mail: info@petrosense.com

Mail: FCI Environmental, Inc.

13111 N. Central Expressway, Suite 440

Dallas, TX 75243

Thank You!

992041, Release 1.3

January 12, 2011

Subject Page

MOD LE 1 - INTROD CTION

Technical Overview@@@@@@@@@@@@@@@@@ 1

First Things First @@@@@@@@@@@@@@@@@@ 3

Basic Operation / Software@@@@@@@@@@@@@@ 5

Preconditioning..@@@@@@@@@@@@@@@@@@. 8

Question & Answer@@@@@@@@@@@@@@@@@. 10

MOD LE 2 - VAPOR CALIBRATION

Vapor Cali ration@@@@@@@@@@@@@@@@@@ 11

Method 1 - Standard Gas Method@@@@@@@@@@@ 12

Method 2 - Liquid-Volume Method@@@@@@@@@@.. 13

Verification@@@@@@@@@@@@@@@@@@@@.. 14

After Cali ration and Verification@@@@@@@@@@@.. 14

Question & Answer@@@@@@@@@@@@@@@@@. 15

MOD LE 3 - WATER CALIBRATION

Water Cali ration.@@@@@@@@@@@@@@@@@@ 16

1-Point Cali ration@@@@@@@@@@@@@@@@@@ 17

2-Point Cali ration@@@@@@@@@@@@@@@@@@ 18

Verification@@@@@@@@@@@@@@@@@@@@@ 19

Pro e Storage After Water Cali ration & Verification@@.@ 19

Question & Answer@@@@@@@@@@@@@@@@@. 20

MOD LE 4 - MEAS REMENTS

Water Measurements@@@@@@@@@@@@@@@@. 21

Vapor Measurements@@@@@@@@@@@@@@@@. 25

Soil Measurements@@@@@@@@@@@@@@@@@. 27

Field/Well Measurements@@@@@@@@@@@@@@.. 28

Data Quality Levels – QA/QC Procedures@@@@@@@.. 28

Data Functions@@@@@@@@@@@@@@@@@@@. 29

Question & Answer@@@@@@@@@@@@@@@@@. 33

992041, Release 1.3

January 12, 2011

Subject Page

MOD LE 5 - MAINTANENCE

Cleaning@@@@@@@@@@@@@@@@@@@@@@ 34

Equipment Maintenance@@@@@@@@@@@@@@@. 35

Do’s & Don’ts@@@@@@@@@@@@@@@@@@@@ 36

Question & Answer@@@@@@@@@@@@@@@@@. 39

MOD LE 6 – S MMARY & REVIEW

Notes@@@@@@@@..@@@@@@@@@@@@@@@ 40

Limited Warranty@@@..@@@@@@@@@@@@@@@ 41

Customer Service@@@@@@@@@@@@@@@@@@. 42

MOD LE 7 - EVAL ATION

Classroom Evaluation@..@@@@@@@@@@@@@@@ 43

MSDS Cleaning Solution@@@@@@@@@@@@@@.@ 46

MSDS p-Xylene Solution@@@@@@@@@@@@@@.@ 49

992041, Release 1.3

January 12, 2011

TECHNICAL OVERVIEW

The PetroSense



Porta le Hydrocar on Analyzer consists of a

microcomputer- ased, porta le, direct, in-situ reading instrument and a

hydrocar on sensing pro e (the AHP-100) that uses the FCI Environmental,

Inc. patented Fi er Optic Chemical Sensor (FOCS®) technology. The pro e

is sensitive to hydrocar ons containing at least 6 car ons and is especially

sensitive to aromatic hydrocar ons. This sensitivity makes the PHA-

100Plus ideal for detecting a variety of petroleum hydrocar on products

such as:

• Unleaded gasoline

• Diesel

• Jet fuels

• Aromatic solvents

• Crude oil

The PHA-100Plus provides the user with the unique a ility to quantifia ly

detect hydrocar ons in vapor, water, at the interface, and in soil.

The hydrocar on sensing pro e employs an optical fi er coated with a

chemical that has an affinity for hydrocar ons. The sensor operates on the

principle that the index of refraction of the optical fi er chemical coating

changes in direct proportion to the concentration of hydrocar ons in air or

water. As hydrocar ons partition into the chemical coating, the change in

the effective index of refraction can e determined y measuring the amount

of light transmitted through the optical fi er. The response depends on the

total num er and type of hydrocar ons present.

A schematic of FOCS® operating principle is shown elow.

LED

Fiber

Optical Coating

Reference

Detector

Sense

Detector

Light Eminating from Fiber

No Hydrocarbons Present

LED Sense

Detector

Optical

Fiber

Coating

More Light Eminating from Fiber

in the Presence of Hydrocarbons

Reference

Detector

992041, Release 1.3

January 12, 2011

FOCS® Operating Principle

PetroSense®

PHA-100Plus Portable Hydrocarbon Analyzer

Process Sequence

1. Raw signal (measures light intensity) →

2. Software converts raw data into a relative ppm measurement →

3. The cali ration process converts the relative ppm measurement to a ppm

measurement ased on a known standard.

The AHP-100 pro e is only sensitive to hydrocar ons containing 6 or more

car ons, hence it has no response to naturally occurring methane (CH

) or

hydrogen sulfide (H

S); and is more sensitive to higher molecular weight

components making it particularly effective in detecting the heavier

petroleum lends (i.e., diesel). The sensor response is reversi le and

maintains an equili rium with its surrounding environment.

The PHA-100Plus is normally cali rated to the aromatic hydrocar on p-

xylene. A quantitative measurement in parts per million (ppm) is o tained

and is displayed in terms of p-xylene equivalents. These measurements can

e converted to actual levels of other hydrocar ons in the sample y

multiplying them with the Relative Response Factor (RRF) for the

hydrocar on that is expected to e present in the sample. This is similar to

using a PID or FID that has een cali rated using iso utylene. The readings

have to e multiplied y the RRF to o tain the concentration of the analyte.

It is also possi le to cali rate the instrument to a specific analyte or gas

lend instead of p-xylene.

992041, Release 1.3

January 12, 2011

FIRST THINGS FIRST

The PHA-100Plus is shipped as a self contained system in a dura le, water

resistant carrying case. Unpack the kit and familiarize yourself with the

contents. A complete packing list may e found elow and in the Users’

Reference Manual, Appendix A.

1 ea PHA-100Plus Instrument Carrying Case

1 ea PetroSense® PHA-100Plus Porta le Analyzer

1 ea PHA-100Plus Pro e with Humidity Tu e

1 ea PHA-100Plus Power/Data Interface Kit

1 ea 0-ppm Cali ration Tu e

2 ea C1 Cali ration Tu e

2 ea C2 Cali ration Tu e

1 ea Wash Bottle (250 mL)

1 ea Aerosol Spray Bottle (Spritzer Bottle)

1 ea Plastic Beaker (400 mL)

1 ea Humidity Tu e, Spare

1 ea Pro e Identification Card

1 ea Operating Instructions

Items Shipped Separately

Pre-mixed C1 Standards (25 ppm)

Pre-mixed C2 Standards (50 ppm)

Training Guide

Turn your PHA-100Plus ON to verify that the unit is working properly.

The PHA-100Plus may need to e charged when you first receive your unit.

This condition will e indicated y a eep and a low attery message in the

display.

992041, Release 1.3

January 12, 2011

To charge the PHA-100Plus

• Remove the interface adapter from the kit.

• Open the cap covering the socket on the ack of the meter.

• Line up the red dots on the connector with the socket and insert

the connector until it latches.

• Plug the charger unit into an AC outlet and attach it to the

interface ca le.

• Twelve to fourteen hours are needed to charge the PHA-100Plus.

The unit may e run on AC power during cali ration or setup.

To prevent “Battery Memory,” fully discharge the PHA-100Plus once a

month before recharging the battery. To discharge the attery, turn ON

the acklight, and leave the PHA-100Plus ON until the display turns OFF.

The attery of an automo ile can also charge the PHA-100Plus. The kit

includes an adapter that plugs into a car’s cigarette lighter. This plugs into

the interface adapter.

As a rule of thum , the operating time of the attery will e approximately

the same as the amount of time which the instrument was charged, provided

the acklighting option on the display is not selected.

992041, Release 1.3

January 12, 2011

BASIC OPERATION/SOFTWARE

The PHA-100Plus is menu driven. The sequence of menus and commands

are viewed in the display window. The instrument is turned ON y a single

depression of the ON/OFF utton. Power can e turned OFF at any time y

pressing the utton.

Always return to the Main Menu before turning the power off. Returning

to the Main Menu avoids incomplete processing. If processing is

incomplete, any new cali ration values may e lost, and the machine returns

to the previous values.

Turn the PHA-100Plus ON. The software opens the Main Menu. The lower

half of the LCD display shows the user which function utton to push in

order to access different su -menus of the PHA-100Plus software.

From the

Main Menu

you can go to

the

• MEASurement Menu <F1>,

• CALi ration Menu <F2>,

• TILities Menu <F3>, or the

• ID Menu <F4>.

MAIN MENU

MEAS CAL UTIL ID

The Measurement Menu

MEASURE MENU

ZERO SNGL CONT MAIN

The user makes all PHA-100Plus measurements in the Measurement Menu

<F1>. This includes zeroing, single point measurements, and continuous

measurements. Single point measurements are timed measurements and

are the most accurate. Continuous measurements work est for sta le

environments ( oth temperature and humidity), screening, or for quick

estimations of concentration.

F1 F2 F3 F4

992041, Release 1.3

January 12, 2011

The Calibration Menu

CALIBRATION MENU

WAT VAP CHECK MAIN

In the Cali ration Menu <F2>, the user can cali rate in water or vapor, or

review the current cali ration parameters and constants.

The tilities Menu

UTILITIES 1

LOGS DATE TIME NEXT

The Utilities Menu <F3> is where logged data, printing functions, acklight

control, averaging, daylight compensation and other accessories for the

PHA-100Plus are located.

The ID Menu

SITE

EDIT PROBE

The ID Menu <F4> is where the site identification and all permanent pro e

parameters are stored. The permanent pro e parameters are

preprogrammed into the unit and are not to e changed y the operator.

F1 F2 F3 F4

Tabla de contenidos

Otros manuales de Instrumento de medición de FCI

FCI

FCI ST100 series Manual de usuario

FCI

FCI DM10-FM Manual de usuario

FCI

FCI ST100 series Instrucciones de montaje

FCI

FCI MT86 Manual de instrucciones

FCI

FCI ST51 Instrucciones de funcionamiento

FCI

FCI ST50 Manual de usuario

FCI

FCI ST50 Instrucciones de funcionamiento

FCI

FCI ST100 series Manual del propietario

FCI

FCI ST80 Series Manual de instrucciones

FCI

FCI ST75 Instrucciones de funcionamiento

FCI

FCI FLT93B Manual de instrucciones

FCI

FCI ST100 series Instrucciones de montaje

FCI

FCI ST100 series Manual de usuario

FCI

FCI ST100A Series Manual de usuario

FCI

FCI MT100 Manual de usuario

FCI

FCI ST51-1 Instrucciones de funcionamiento

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario