FaVal MERCURY S75 Manual de usuario
Digital Satellite Receiver
MERCURY S75
Operating Instructions
_______________________________________________________________
Version 1.0 18.08.08
Table of Contents
_______________________________________________________________
2
Table of Contents
Table of Contents................................................................................................ 2
Preface ............................................................................................................... 3
Safety Information.............................................................................................. 4
Receiver ront View ............................................................................................ 6
Receiver Back...................................................................................................... 6
Remote control ....................................................................................................7
Remote control buttons ...................................................................................... 8
Connect Receiver ................................................................................................ 9
1. Installation .....................................................................................................10
1.1 Antenna Settings.......................................................................................10
1.2 Edit Satellite..............................................................................................11
1.3 Transponder List .......................................................................................12
2. Edit Program..................................................................................................13
3. Edit avorites .................................................................................................14
4. System settings..............................................................................................14
4.1 Set time ....................................................................................................14
4.2 Set A/V output ..........................................................................................15
4.3 OSD settings.............................................................................................15
4.4 Parental Lock........................................................................................... 16
4.5 actory Settings....................................................................................... 16
5. Games............................................................................................................17
6. Timer .............................................................................................................17
7. Basic Operating Steps ....................................................................................18
Cleaning............................................................................................................ 19
Disposal ............................................................................................................ 19
Eliminating malfunctions .................................................................................. 20
Technical Information ........................................................................................21
Preface
_______________________________________________________________
3
Preface
Dear Customer,
Thank you very much for choosing our Satellite Receiver.
You have selected a receiver of our new generation – the experience of 10 years
of digital transfer technology go into our aVal Receivers.
Please read through the operating instructions carefully to prevent
malfunctioning of the device. Please particularly observe the safety information.
Non-observance can lead not only to damage in the device, but also to personal
injury.
Your receiver is preinstalled in the delivery condition and changes do not
normally need to be made in the satellite settings. This makes the first
installation especially convenient.
Should unexpected problems arise, see the chapter entitled “Eliminating
malfunctions”. Your specialized dealer will also be glad to speak with you and
provide assistance.
Our dedication in the development of high quality entertainment electronics will
certainly ensure your satisfaction in the future with our range of products.
We wish you good reception.
Safet Information
_______________________________________________________________
4
Safet Information
Read the operating instructions thoroughly before connecting the device.
•Operate the device only on mains with a corresponding power connection.
•Operate the device near an outlet and configure it freely accessibly for safety
reasons.
•The digital receiver must be disconnected from the mains before it is
connected to an LNB, Mult iswitch or TV set and video recorder. Otherwise
the device could be damaged.
•Make sure the device stands free. Maintain a distance of at least 20 cm to the
left and right and 50 cm above from other devices and furniture parts where
you operate the device.
•Make sure all ventilation holes are free and adequate air can circulate
through the device. Do not put other electronic devices on the receiver. Do
not place objects such as newspapers, magazines, table cloths on the device.
Make sure the ventilation grids are not covered by net curtains or curtains.
Do not place burning objects, for example burning candles, on the device.
•Make sure the device is not exposed to steam, rain or other splashing or
dripping liquids. Do not put any objects filled with liquids such as vases on
the device.
•Never open the device. Danger of electric shock!
•To make the device completely free of tension, you must unplug the power
cable from the outlet. If you do not use the device for a long time, unplug the
power plug from the outlet.
•Lightning in the antenna is dangerous, so the LNB as well as the satellite
antenna must be bound with lightning protection or a suitable grounder.
•To protect your receiver, switch it off during thunderstorms and unplug the
power plug and antenna cable. This protects your receiver from damage.
•Do not touch the power cable with wet hands!
•Make sure you have made all connections before you connect the device to
the power network.
•Use original parts or parts recommended by a specialized dealer only to
avoid damage to your device or personal injury. By non-observance of this
warning, the device guarantee expires. All repairs must be made by a
certified specialist.
Proper handling of batteries
Safet Information
_______________________________________________________________
5
•Batteries can contain poisonous substances. Keep batteries out of reach of
children, as the batteries could be swallowed.
•Leaking batteries can cause damage in the remote control. Batteries can
contain poisonous substances which are harmful to the environment.
Dispose of the batteries in complete accordance with the legal regulations.
Never throw the batteries away with normal garbage.
Intended use
The digital satellite receiver is for reception of digital television programs or radio
programs in the private domain. It is exclusively designated for the stated
purpose and may only be used for this. This also includes observance of all
information in these operating instructions, particularly the safety information.
Any other use is not in accordance with the requirements and can cause damage
to property and even personal injury.
The manufacturer takes no responsibility for damage or injuries arising from
nonobservance of the safety information or from improper handling of the
device.
Settings in the receiver must only be made by persons who have proper
knowledge in handling entertainment electronics. This also means that every
person who mounts, connects, operates, cleans or disposes of this receiver has
read the complete operating instructions of the device to ensure intended use.
Keep the operating instructions for this purpose.
Product contents
Please check the product contents after purchase of your receiver:
1 Satellite receiver, 1 remote control, 2 batteries (AAA), instructions (1),
Receiver Front View
_______________________________________________________________
6
Receiver Front View
Receiver Back
1. Digital Audio: Digital coaxial audio connection
2. Audio-L: Left analog audio connection
3. Audio-R: Right analog audio connection
4. LNB OUT: Loop-through connection of the receiver
5. TV: SCART connection TV set
6. Power main power switch
Remote control
_______________________________________________________________
7
Remote control
Remote control buttons
_______________________________________________________________
8
Remote control buttons
No. S mbol Explanation
1 Turn on and standby
2
0- 9
Enter program directly, digit input
3
SUBTL
Check if subtitles are available for the broadcast
4
16:9
Switch from 4:3 to 16:9 full-screen mode
5
VOL ◄
– Lower volume
– Left menu option
6
OK
– Confirm menu or menu item
– Show channel list
7
MENU
Call up menu, basic settings
8
OK
– Confirm menu or menu item
– Show channel list
9
TXT
Activate teletext
10
EPG
Electronic Program Guide
11
AUDIO
Open expanded options for audio settings
12
SAT
Open satellite settings
13
AV
Call up favorites lists (if created)
14
ZOOM
Enlargement of a screen
15
(MUTE)
Mute
16
TV/SAT
Source channels for TV channel select
17
SLEEP
Settings for automatic switching off of the
receiver
18
EXIT
Exit menu or menu item
19
IN O
Display data of current program
20
Pg UP
Go one page higher
21
Pg Down
Go one page lower
22
MULTI -
PICTURE
Multi-picture display (nine pictures)
23
TV/RADIO
Switch between TV and radio mode
24
RECALL
Switch to previous program
25
PAUSE
Switch to freeze frame during TV program
Connect Receiver
_______________________________________________________________
9
Connect Receiver
( ig. similar)
1. Installation
_______________________________________________________________
10
1. Installation
Connect the receiver with the antenna cable and plug the receiver into your
TV set. Plug the power plugs of the connected devices in the power socket
and switch on the receiver with the Standby button.
Then press the “MENU” button
Now select the menu item “Installation” (PIN code: 0000). In this menu you can
edit your antenna settings and make additional settings to your satellite
reception.
With the direction buttons “CH ▲” and “CH ▼” (up and down) as well as
„VOL◄“ and “VOL ►” (jump from one level to the next) you can navigate the
menu, and with the “OK”button you can go into a menu item. To return to a
menu item, use the “EXIT” or “MENU” button.
_____________________________________________________________________
The channels are preset. Adjust the settings only if you know the
exact values and are familiar with satellite transmission technology.
1.1 Antenna Settings
In this menu item you can set your receiver to the desired satellite. The following
parameters can be defined: LNB type, frequency, 22 kHz, DiSEqC, LNB power,
Scan mode. With the „VOL◄“ and “VOL ►” buttons you can enter the desired
values, then "Save" and confirm with the “OK” button.
Satellite name
In the right column you can select among pre-programmed satellites the
satellites you receive. (Only the satellites which your satellite dish is aimed at are
receiveable.)
LNB T pe
You can select the LNB type you use here (Standard: Universal).
22 kHz Tone
If your LNB is not universal, the value must be changed accordingly.
Tabla de contenidos
Otros manuales de Receptor de FaVal
