Fastus CDX Series Manual de usuario
OPTEX FA CO.,
LTD.
*FASTUS is a product brand of Optex FA.
High-Accuracy Laser Displacement Sensor
CDX Series
User’s Manual
Before using this product, please read this manual carefully.
Keep this manual at hand so that it can be used whenever necessary.
Store the manual in a safe location.
Got Application or Technical Questions?
Contact Ramco Innovations today!
Ramco - Optex FA Divsion www.Optex-Ramco.com Got Questions? 1-800-280-6933
Ramco - Optex FA Divsion www.Optex-Ramco.com Got Questions? 1-800-280-6933
i
Introduction
Introduction
Thank you for purchasing the CDX Series High-Accuracy Laser Displacement Sensor. This manual
contains the information necessary for using the CDX Series High-Accuracy Laser Displacement Sensor.
Read this manual thoroughly before using the product to ensure correct product use with full understanding
RIWKHIXQFWLRQVDQGSHUIRUPDQFHRIWKHSURGXFW$OVRDIWHU\RXKDYH¿QLVKHGUHDGLQJWKLVPDQXDOVWRUHLW
safely for future reference.
Trademarks and registered trademarks appearing in this manual are the property of their respective
owners.
The copyright of this user’s manual is owned by Optex FA Co., Ltd. All the contents contained herein are
protected by copyright law. Unauthorized copying of this manual is strictly prohibited.
Ramco - Optex FA Divsion www.Optex-Ramco.com Got Questions? 1-800-280-6933
ii Safety Precautions
Safety Precautions
This manual uses the following symbols to display safety precautions for ensuring safe operation of the CDX
Series high-accuracy laser displacement sensor.
Precautions listed here describe important information about safety. Make sure to follow them accordingly.
Safety Symbols
The safety symbols and their meanings are as follows.
Warning
Indicates that any improper operation or handling may result in moderate or minor injury,
and in rare cases, serious injury or death. Also indicates a risk of serious property
damage.
Caution
Indicates that any improper operation or handling may sometimes result in moderate or
minor injury or property damage.
Notes
Warning
This product cannot be used as protective equipment for the purpose of protecting the human
body.
Do not disassemble, repair, modify, deform under pressure, or attempt to incinerate this product.
'RLQJVRPD\FDXVHLQMXU\RU¿UH
Do not use this product in water or in a location where it may be exposed to water. Do not use
this product if wet.
'RLQJVRPD\FDXVHD¿UHRUGDPDJHWKHSURGXFW
7KLVSURGXFWLVQRWH[SORVLRQSURRIDQGVKRXOGQRWEHXVHGDURXQGÀDPPDEOHRUH[SORVLYHJDVHV
or liquids.
'RLQJVRPD\FDXVHLJQLWLRQUHVXOWLQJLQDQH[SORVLRQRU¿UH
'RQRWXVHDLUGXVWHUVRUDQ\VSUD\WKDWXVHVÀDPPDEOHJDVDURXQGWKHSURGXFWRURQWKHLQVLGH
of the product.
'RLQJVRPD\FDXVHLJQLWLRQUHVXOWLQJLQDQH[SORVLRQRU¿UH
Do not install this product or its cables in any of the following locations.
'RLQJVRPD\FDXVHD¿UHGDPDJHRUDPDOIXQFWLRQ
1. Locations where dust, salt, iron powders, or vapor (steam) is present.
/RFDWLRQVVXEMHFWHGWRFRUURVLYHJDVHVRUÀDPPDEOHJDVHV
3. Locations where water, oil, or chemical splashes may occur.
4. Locations where heavy vibrations or impacts may occur.
5. Locations where the ambient temperature exceeds the rated range.
6. Locations subject to rapid temperature changes (or where condensation occurs).
/RFDWLRQVZLWKVWURQJHOHFWULFRUPDJQHWLF¿HOGV
8. Outdoor locations or locations subject to direct light.
Do not use the product at voltages or with AC power supplies that exceed the rated voltage.
'RLQJVRPD\FDXVHD¿UHRUGDPDJHWKHSURGXFW
Ramco - Optex FA Divsion www.Optex-Ramco.com Got Questions? 1-800-280-6933
iii
Safety Precautions
Warning
What to do in the event of a malfunction such as smoke being emitted from the product
If you detect any malfunction including emission of smoke, abnormal smells or sounds, or the
body becoming very hot, immediately stop operating the product and turn off the power.
'RLQJVRPD\FDXVHD¿UH
Repairing the product is dangerous and should in no way be performed by the customer. Contact
an Optex FA sales representative for repairs.
What to do if water enters the product
If water or any other liquid enters the product or the cable, immediately stop operating the
SURGXFWDQGWXUQRIIWKHSRZHU8VLQJWKHSURGXFWLQWKLVFRQGLWLRQPD\FDXVHD¿UH
Caution
Do not touch the product or the cable with wet hands. Doing so may damage the product.
)ROORZWKHLQVWUXFWLRQVLQWKLVPDQXDORUWKHVSHFL¿HGLQVWUXFWLRQPDQXDOZKHQZLULQJWKHSURGXFW
or the dedicated controller for the correct wiring method.
Incorrect wiring can damage the product or the controller, or cause a malfunction.
Use the dedicated cable for connecting the product.
Use of anything other than the dedicated cable may cause a malfunction or damage the product.
Route wiring separately from high-voltage circuits and power circuits.
If the wires are routed together, induction may occur, which can cause a malfunction or damage
the product.
If this is unavoidable, use a conductive object such as a properly grounded conduit as a shield.
Install this product as far away from high-voltage equipment, power equipment, equipment that
generates large switching surges, welders, inverter motors, or any equipment that can be a
source of noise.
Install the product and the dedicated controller securely.
Ensure that any lock mechanisms available have been locked before use.
Failure to ensure secure installation can result in the product falling and becoming damaged.
7LJKWHQPRXQWLQJVFUHZVWRWKHWRUTXHVSHFL¿HGLQWKLVPDQXDO
Do not twist or apply stress to the cable. Doing so may damage the cable or the connector.
In addition, install the cable while ensuring that the minimum bend radius or more is secured.
Do not drop the product or subject the product to strong impacts. Doing so may damage the
product.
During operation, this product becomes very hot. Do not touch it for long periods of time.
Doing so may cause a low-temperature burn.
Use the product and dedicated controller within the rated ranges.
Make sure to turn the power off before connecting or disconnecting the cable.
Connecting or disconnecting while energized may damage the product.
Ramco - Optex FA Divsion www.Optex-Ramco.com Got Questions? 1-800-280-6933
iv Safety Precautions
Caution
When connecting the cable, make sure to hold it by the connector portion, and do not apply
excessive force to the cable.
When disconnecting the connector, be careful not to touch the terminals inside the connector,
and do not allow foreign objects to enter the connector.
Handling Precautions
$IWHUFDUHIXOO\FRQVLGHULQJWKHLQWHQGHGXVHUHTXLUHGVSHFL¿FDWLRQVDQGXVDJHFRQGLWLRQVLQVWDOODQGXVH
WKHSURGXFWZLWKLQWKHVSHFL¿HGUDQJHV
2. Due to advances in technology, published content, including the hardware, software, and system
information published in this user’s manual are subject to change without notice.
3. When using this product, it is the responsibility of the customer to ensure necessary safety designs in
hardware, software, and systems in order to prevent any threat to life, physical health, and property due to
product malfunction or failure.
4. This product is not intended for use with nuclear power, railways, aviation, vehicles, medical equipment,
food-handling equipment, or any application where particular safety measures are required. Absolutely do
QRWXVHWKLVSURGXFWIRUDQ\RIWKHVH¿HOGV
5. This product cannot be used in applications that directly or indirectly detect human bodies for the purpose
of ensuring safety. Do not use this product as a detection device for protecting the human body.
6. Do not use this product for the development of weapons of mass destruction, for military use, or for any
other military application. Moreover, if this product is to be exported, comply with all applicable export laws
and regulations, including the "Foreign Exchange and Foreign Trade Act" and the "Export Administration
Regulations," and carry out the necessary procedures pursuant to the provisions therein.
7. For more details on conformity to the Restriction of Hazardous Substances Directive for this product,
please contact an Optex FA sales representative.
Before using this product, fully examine the applicable environmental laws and regulations, and operate
the product in conformity to such laws and regulations.
Optex FA does not assume any responsibility for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
Precautions for Laser Use
Caution
This product emits a Class 1 visible laser beam that is compliant with JIS C6802 / IEC60825-1 laser safety
standards.
,IWKLVSURGXFWZLOOEHH[SRUWHGWRWKH8QLWHG6WDWHVDSSURYDOPXVW¿UVWEHREWDLQHGIURPWKH)'$)RRG
and Drug Administration), the laser regulating body of the United States.
A report for this product has been submitted to the CDRH (Center for Devices and Radiological Health).
Do not look directly at the laser beam or intentionally shine the laser beam in another person's eyes. Doing
so may have adverse affects on the eyes, including temporary blindness.
If installing this product in your own equipment, ensure that the product is properly handled according to
the laws and regulations of the relevant country or region.
This product does not have a function that stops the emission of light from the laser during disassembly.
Do not disassemble the product.
Ramco - Optex FA Divsion www.Optex-Ramco.com Got Questions? 1-800-280-6933
v
Precautions When Using This Product Outside of Japan
Precautions When Using This Product
Outside of Japan
CDX Series sensor heads are subject to “Export Trade Control Order Appended Table 1 2-(12)
Measurement devices (including machine tools with a measurement function).”
,IXVLQJWKHVHSURGXFWVLQWHUQDWLRQDOO\ZHDVNWKDW\RX¿OORXWWKHVXLWDEOHDSSOLFDWLRQVZKHQH[SRUWLQJWKHVH
products.
Optex FA has prepared products to which limits on resolution have been added to enable their non-
applicability to the Export Trade Control Order.
Model Resolution Repeatability
CDX-L15A
ȝP ȝP
CDX-LW15A
CDX-30A
CDX-W30A
CDX-85A
CDX-W85A
CDX-150A
CDX-W150A
Ramco - Optex FA Divsion www.Optex-Ramco.com Got Questions? 1-800-280-6933
vi Contents
Contents
Introduction .......................................................................................................................... i
Safety Precautions ............................................................................................................. ii
Precautions When Using This Product Outside of Japan .................................................. v
Expressions Used in This Manual ................................................................................... viii
1 Product Overview
6\VWHP&RQ¿JXUDWLRQ ......................................................................................... 1-2
1-2 Included Items .................................................................................................... 1-3
1-3 Cables ................................................................................................................ 1-4
1-4 Names and Functions of Parts ........................................................................... 1-6
1-5 Mounting the Head ............................................................................................. 1-7
2 Web Settings Screen and Function Details
2-1 Checking the IP Address on CDX Series Products ............................................ 2-2
2-2 Connection Using a Web Browser ...................................................................... 2-4
2-3 Screen Flow Chart .............................................................................................. 2-5
2-4 Monitor Screen ................................................................................................... 2-6
2-5 Measurement Screen ......................................................................................... 2-8
2-6 I/O Setting Screen ............................................................................................ 2-18
2-7 Device Screen .................................................................................................. 2-26
2-8 Communication Screen .................................................................................... 2-28
2-9 Storage Screen ................................................................................................. 2-30
2-10 Information Screen ........................................................................................... 2-33
Ramco - Optex FA Divsion www.Optex-Ramco.com Got Questions? 1-800-280-6933
vii
Contents
3
&RQ¿JXUDWLRQRI6HWWLQJV:KHQ8VLQJZLWK&'$6HULHV
3-1 Connecting ......................................................................................................... 3-2
3-2 List of Setting Items ............................................................................................ 3-4
4 Ethernet Communication
&RPPXQLFDWLRQ6SHFL¿FDWLRQV ........................................................................... 4-2
4-2 List of Commands for Reading/Writing Settings/Measured Values .................... 4-3
4-3 Acquiring Measured Values with Time Data ..................................................... 4-11
2EWDLQLQJ5HFHLYHG/LJKW:DYHIRUPVDQG&RQ¿JXULQJ0DVN6HWWLQJV ............ 4-12
4-5 Setting/Reading Individual Sensor Descriptions ............................................... 4-13
4-6 Continuously Transmitting/Receiving Measured Values Automatically ............ 4-14
4-7 Error Messages ................................................................................................ 4-18
5 6SHFL¿FDWLRQV
6SHFL¿FDWLRQV ..................................................................................................... 5-2
5-2 Dimensions ......................................................................................................... 5-4
5-3 Characteristics .................................................................................................... 5-6
Index
Ramco - Optex FA Divsion www.Optex-Ramco.com Got Questions? 1-800-280-6933
viii Expressions Used in This Manual
Expressions Used in This Manual
This section explains the expressions used in this manual.
Caution Indicates an item that requires special attention during operation
MEMO Indicates information that is useful to know during operation
Included Screens
Screens included in this manual are subject to change without prior notice for product improvement
purposes.
We appreciate your understanding.
Ramco - Optex FA Divsion www.Optex-Ramco.com Got Questions? 1-800-280-6933
Este manual sirve para los siguientes modelos
8
Tabla de contenidos
Otros manuales de Sensor de seguridad de Fastus
