Fastrax SD5LCDN Manual de usuario

FASTRAX ll E KEYBOARD CONTROLLER

Please read this manual thoroughly before use and keep it handy for future reference.

Rev.M70601

Instruction Manual

WARNINGS AND CAUTIONS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR

OTHER OPENINGS ON THE EQUIPMENT.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to

alert the user to the presence of uninsulated "dangerous voltage" within the product's

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instruction in the literature

WARNING

CAUTION

accompanying the product.

III

FCC COMPLIANCE STATEMENT

FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO

COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO

PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE

REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN

THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS

EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY

ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE

INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO

COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL

AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE

USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN

EXPENSE.

CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY

THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S

AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME

NMB-003 DU CANADA.

CE COMPLIANCE STATEMENT

WARNING

THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS

PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER

MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.

IMPORTANT SAFEGUARDS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that product heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long

periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

14. CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE BY

QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF

ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN

THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU

ARE QUALIFIED TO DO SO.

15. Use Certified/Listed Class 2 power supply transformer only.

Table of Contents

Chapter 1 — Introduction...........................................................................................................1

1.1 Features...............................................................................................................................................1

Chapter 2 — Installation and Configuration .............................................................................3

2.1 Package Contents...............................................................................................................................3

2.2 Required Installation Tools ..................................................................................................................3

2.3 Basic Configuration of Fastrax II E Dome System..............................................................................4

2.4 RS-485 End of Line Termination .........................................................................................................5

2.5 Dip Switch Setting ...............................................................................................................................6

2.6 Quick Installation Procedure ...............................................................................................................6

2.7 Getting Started ....................................................................................................................................7

2.8 Recommended Installation Examples.................................................................................................8

2.9 Multiplexer Configuration Examples .................................................................................................11

2.10 Keyboard Configuration Menu Setup..............................................................................................15

yMAIN MENU .......................................................................................................................................... 15

yCONFIGURATION MENU ..................................................................................................................... 16

yCHANGE USER PASSWORD............................................................................................................... 16

yCHANGE ADMIN PASSWORD ............................................................................................................. 17

yNETWORK SETUP................................................................................................................................ 17

ySET BAUD RATE................................................................................................................................... 17

yCOMMUNICATIONS PORTS ................................................................................................................ 18

yMULTIPLEXER CONFIGURATION ....................................................................................................... 18

yALIAS PRESET MENU.......................................................................................................................... 19

ySLAVE KEYBOARD SETUP MENU ...................................................................................................... 19

ySLAVE KEYBOARD UNIT ..................................................................................................................... 20

yGRANT ACCESS DOME....................................................................................................................... 20

yDATA BANK........................................................................................................................................... 21

yTIME & DATE ........................................................................................................................................ 21

yALARM MENU ....................................................................................................................................... 22

yALARM BOX .......................................................................................................................................... 22

yALARM SCHEDULE .............................................................................................................................. 23

yALARM HISTORY.................................................................................................................................. 23

ySCHEDULE ........................................................................................................................................... 24

yMACRO SETUP..................................................................................................................................... 24

yWEEKLY SCHEDULE............................................................................................................................ 25

yANNUAL SCHEDULE............................................................................................................................ 25

yNIGHT SHOT SCHEDULE .................................................................................................................... 25

ySEQUENCE SETUP.............................................................................................................................. 26

2.11 Install with standalone DVR Series .................................................................................................27

2.12 Install with PC DVR Series..............................................................................................................30

Chapter 3 — Operation.............................................................................................................33

3.1 Keyboard Lock/Unlock...........................................................................................................................33

3.2 Selecting Camera & Mux Control ..........................................................................................................33

3.3 Camera Control .....................................................................................................................................35

MANUAL FOCUS CONTROL

MANUAL IRIS CONTROL

ZOOM CONTROL

GLBL (GLOBAL) COMMAND

3.4 Summary of Keyboard Controls ............................................................................................................36

KEYS FOR DOME CAMERA

KEYS FOR MULTIPLEXER

KEYS FOR DVR

KEYS FOR KEYBOARD CONTROLLER FUNCTION

Appendix A — Specifications..............................................................................................................39

Appendix B — Short Cut Key..............................................................................................................40

Appendix C — Trouble Shooting .......................................................................................................41

Appendix D — Control the other camera.........................................................................................42

Appendix E — Control the DVR for over version 3.1.0.................................................................45

Chapter 1 — Introduction

1.1 Features

The Fastrax ll E keyboard controller is capable of controlling Fastrax II (E) dome cameras

and providing remote control functions for a variety of external switching devices such as

Multiplexers, Digital Video Recorders etc…

A combination of 4 Keyboard controllers and 5 Multiplexers comprises a small matrix system

(64x4) using its remote control functions and programmable macro functions.

•5 inch (320x240 dot pitch) TFT LCD monitor.

•Variable speed control joystick with zoom controlling handle.

•Program and recall programmed preset positions, auto scan, tour, pattern, from the

selected dome camera.

•8 Sequences switch cameras to the specific spot monitors as programmed in the KBD

controller menu.

•Two levels of password are supported for higher security, administrator and user.

•Up to 254 dome cameras controllable including 64 dome cameras with Alarm mode.

•Multiplexers (Max 255) and DVR system (Max 99) can be controlled remotely at each

KBD controller regardless Master or Slave.

•Using 3~5 multiplexers and 4 Keyboard controllers, 32~64x4 matrix system can be

configured.

•Up to 3 slave (remote) same type keyboard controllers can be connected to Master(main)

keyboard controller.

•Battery backed-up clock displays real time on the LCD screen.

•Weekly and annual schedule of all program functions.

•Up to two dome cameras’ programmed data can be downloaded to nonvolatile memory

space, and later uploaded to the new dome camera.

•Up to 8 sequence group with 64 cameras programming function.

UP TO 254 CAMERA

UP TO 255 MULTIPLEXER UP TO 99 DVR

J-box

Alarm Input

UP TO 8

Alarm

Output

UP TO 4

<Siren>

Master Keyboard

J-box

Figure 1 – Typical System Configuration

Chapter 2 — Installation and Configuration

2.1 Package Contents

The package contains the following.

Description Q’ty

Keyboard controller 1

Junction box (J-box) 1

3m 8pin cable (Shielded cable for video signal) 1

3m 8pin cable (Unshielded cable) 1

M4 x L10 Self tapping screws 4

Instruction manual 1

12VDC Power supply (SMPS) 1

Power Cord 1

2.2 Required Installation Tools

No special tools are required to install the KBD controller. Refer to the installation manuals for

the other items that make up part of your system.

2.3 Basic Configuration of Fastrax ll E Dome System.

FIGURE 2 – BASIC INSTALLATION DIAGRAM

Tabla de contenidos

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario