Fastfame 9WMV Series Manual de usuario

9WMV/V+Series

This manual, software and firmware described in it are copyrighted by

their respective owners and protected under the laws of the Universal

store in a retrieval system, or translate into any language, in any form or

by any means, electronic, mechanical, magnetic, optical, chemical,

biological, molecular, manual, or otherwise, any part of this publication

without the express written permission of the publisher.

All products and trade names described within are mentioned for

identification purpose only. No affiliation with or endorsement of the

manufacturer is made or implied. Product names and brands appearing

in this manual are registered trademarks of their respective companies.

The information published herein has been checked for accuracy as of

publishing time. No representation or warranties regarding the fitness

of this document for any use are made or implied by the publisher. We

reserve the right to revise this document or make changes in the

specifications of the product described therein at any time without

notice and without obligation to notify any person of such revision or

change.

Print in Taiwan.

User Manual V1.1

9WMV Series including 3 models as follows

1. 9WMV (810)

2. 9WDMV (810DC100)

3. 9WEMV (810E)

You can get anyone of the above from the

regional distributor according to your needs.

User’s manual Version : 1.10

Release Date : Feb. 2000

Item Checklist

Before you begin installing your motherboard, please make

sure that the following materials have been shipped:

If you discover damaged or missing items, please contact

your retailer.

This mainboard comes in a sturdy cardboard shipping

carton, which should contain the following items:

• This Mainboard

• This User’s Manual

• CD Title Driver

• Cable Set

9WMV/V +Series User’s Manual

CONTENTS

1 Introduction .............................................................................................1-1

1.1 Introduction ..........................................….........................................1-1

1.2 Specifications.............................................…………........….............1-1

1.3 Block Diagram ...................................………………………..............1-4

1.4 Main Board Layout with Default Setting...............……………...........1-5

1.5 Static Electricity Precautions……………………………………………1-6

2 Installation Procedures ...........................………......................................2-1

2.1 Setting System Jumpers..................……...........................................2-1

2.2 System Memory (DIMM) ..................………......................................2-4

2.3 Central Processing Unit (CPU)..........…….........................................2-5

2.4 Expansion Cards...............................……………...............................2-6

2.5 External Connectors..........................…………...................................2-7

2.6 Power Connection Procedures............………..................................2-16

3 AWARD BIOS Setup ................................................................................3-1

3.1 introduction .....................................……………………………...........3-1

3.2 Main Menu ………………………………………………………….. …….3-4

3.3 Standard CMOS Setup ………………………………………………..…3-6

3.4 Advanced BIOS Features………………………………………………3-10

3.5 Advanced Chipset Features/Integrated Peripherals……….. ……….3-13

3.6 Integrated Peripherals……………………………………………….….3-16

3.7 Power Management Setup ………………………………………….…..3-21

3.8 PnP/PCI Configuration Setup ……………………………………….…3-25

3.9 PC Health Status ………………………………….…………………..3-27

3.10 Frequency/Voltage Control ……………………………………….. ….3-28

3.11 Defaults Menu …………………………………………………….……3-29

3.12 Supervisor/User Password Setting …………………………………..3-30

3.13 Exit Selecting ……………………………………………………..…….3-31

4 Software Driver Installation.........................................……………....................4-1

4.1 UPDATED PRODUCT INFORMATION …………………………..…….4-1

4.2 Installing Graphics Driver ………………………………………………..…..4-4

4.3 Installing Audio Driver …………………………………………………….….4-7

4.4 Anti-Virus software

installation………………………...………….………….4-10

9WMV/V +Series User’s Manual

1-1

Introduction

1-1 Introduction

The motherboard is a high-performance, low-cost motherboard which supports the

Intel PII;PIII and Socket 370 microprocessor.System memory bank supports 3

DIMM socket. Memory up to 512MB PC-100 SDRAM.

On-board features include 2X AGP, stereo sound, ATX power, super I/O, 2 Ultra

DMA/66 EIDE interfaces, 2 USB ports, 3 PCI expansion slots, and 1 AMR slot.

1-2 Specifications

CPU

-Pentium ® II/III®&Celeron TM Processor.

-Celeron TM Socket 370 PPGA packaged Processor.

-2 nd level Cache Depend on CPU.

-Coppermine Socket 370 FCPGA packaged Processor.

Chipset -Intel®GMCH82810/810DC100/810E,consisting of:

-82810DC100/82810E Graphics and memory controller

Hub(GMCH).

-82801AA(ICH) I/O Controller Hub.

Clock Generator

-Supports 66 / 100 / 133MHz.

Memory

-3 x 168-pin DIMM Sockets.

-Supports PC-100 SDRAM 16MB~512MB.

-Supports only 3.3V SDRAM DIMM.

VGA -Integrated 2D/3D graphics chip(GMCH).

-Integrated 24-bit 230MHz RAMDAC.

-4MB display cache.(9WMV/V+ Without)

-Integrated H/W Motion compensation engine.

9WMV/V +Series User’s Manual

1-2

Audio -Supports AC97 CODEC (AD1881/ALC100).

-Supports earphones, two channel speaker mode.

-MPU-401 game/MIDI port and Sound blaster®16

compatible.

I/O Control -ITE IT8712F.

Expansion Slot -Three 32-bit PCI slots support Master mode.

-One Audio Modem Riser (AMR) slot.

I/O Interface -PCI Bus master IDE interface on board with two

connectors support 4 IDE devices in 2 channel, the PCI

IDE Controller supports PIO Mode 0 to Mode 4, Bus

master IDE DMA Mode 2 and Ultra DMA 33/66.

-On board super Multi-I/O chip that support 2 serial port

with 16550 Fast UART compatible, 1 parallel port with

EPP and ECP capabilities, and a floppy disk drive

interface.

-On board support PS/2 mouse Connector.

-On board support PS/2 Keyboard Connector.

-On board 2 USB ports.

-On board IrDA connector.

-Floppy port supports 2 FDD with 360K, 720K,1.2M,1.44M

and 2.88M bytes ,Supports LS-120 floppy disk device.

Other Function -Support modem Ring Power on.

-Supports Keyboard, PS/2 Mouse power on, and

WOL (Wake On LAN).

Power Supply -On board 3V, 5V and 12V 20-pin ATX power connector.

-Use switching regulator to support CPU core voltage.

Hardware Monitor

-CPU/Power Supply/Chassis Fan Revolution detecting.

-CPU Fan Control.

-System Voltage Detect.

-Display Actual Current Voltage.

9WMV/V +Series User’s Manual

1-3

BIOS -Licensed AWARD BIOS, 4M bit FLASH RAM.

-ACPI ready for PC98/Windows 98.

-System BIOS supports ACPI function and Green feature

function, DMI, Plug and Play Flash ROM.

Form factor -Micro ATX Form Factor.

-Dimension 190mm x 245mm, 4-layer PCB.

TV OUT (9WEMV+/9WDMV+/9WMV+ Serial only)

-On board CHRONTEL CH7007 digital PC to TV encoder.

-Supports NTSC, and PAL TV formats.

-Provides Composite, S-Video outputs.

-Auto-detection of TV presence.

DRIVERS -Intel®810 Chipset Graphics Drivers.

-Intel®INF Installation Utility.

-AC97 audio sound drivers.

-DirectX 6.1.

9WMV/V +Series User’s Manual

1-4

1-3Block Diagram

I/O

IT8712F

9WMV/V +Series User’s Manual

1-5

1-4Main Board Layout with Default Setting

DISPLAY CACHE

CH7007

FWH

9WMV/V +Series User’s Manual

1-6

1-5Static Electricity Precautions

Static electricity can easily damage your motherboard.

Observing a few basic precautions can help you safeguard against damage that

could result in expensive repairs. Follow the measures below to protect your

equipment from static discharge:

Keep the motherboard and other system components in their antistatic

packaging until you are ready to install them.

Touch a grounded surface before you remove any system component from

its protective antistatic packaging. A grounded surface within easy reach is

the expansion slot covers at the rear of the system case. or any other

unpainted portion of the system chassis.

During configuration and installation, touch a ground surface frequently to

discharge any static electric charge that may build up in your body. Another

option is to wear a grounding wrist strap.

When handling a motherboard or an adapter card, avoid touching its

components. Handle the motherboard and adapter cards either by the

edges or by the mounting bracket that attaches to the slot opening in the

case.

9WMV/V +Series User’s Manual

2-1

Installation Procedures

The mainboard has some user-adjustable jumpers on the board that allow you to

configure your system to suit your requirements. This chapter contains information

on the various jumper settings on your mainboard.

To set up your computer, you must complete the following steps:

1. Setting system jumpers.

2. Install RAM modules.

3. Install CPU & FAN.

4. Connect ribbon cables, cabinet wires, and power supply.

5. Set up BIOS.

6. Set up system drivers and utility.

2-1Setting System Jumpers

You may configure your motherboard to match the needs of your applications by

setting jumpers. A jumper is the simplest kind of electrical switch. It consists of two

metal pins and a small metal clip (often protected by a plastic cover) that slides

over the pins to connect them. To “close” a jumper, you connect the pins with the

clip. To ”open” a jumper, you remove the clip. Sometimes a jumper will have three

pins, labeled 1, 2, 3. In this case you would connect either pin 1 and 2 or 2 and 3.

OPEN CLOSED CLOSED 2-3

9WMV/V +Series User’s Manual

2-2

The jumper settings are schematically depicted in this manual as follows:

A pair of needle-nose pliers may be helpful when working with jumpers.

Note: When you open the jumper, attach the plastic jumper cap to one of the pins

so you won’t lose it.

Warning: Always completely disconnect the power cord from your board

whenever you are working on it. Do not make connections while the power is on

because sensitive electronic components can be damaged by the sudden rush of

power.

Always ground yourself to remove any static charge before touching the board.

Modem electronic devices are very sensitive to static electric charges. Use a

grounding wrist strap at all times. Place all electronic components on a

static-dissipative surface or in a static-shielded bag when they are not in the

chassis.

CPU External Frequency Settings:(JP5A,JP5B)

The Motherboard supports Intel Socket 370 CPUs with 66MHz or 100MHz or

133MHz(9WEMV/V+ series only) external frequency. Setting the jumper according

to the external frequency of the CPU you are going to install on the motherboard.

states JP5A JP5B

1BIOS auto-detect CPU

Frequency(66/100MHZ)

2BIOS auto-detect CPU

Frequency(100/133MHz)

*9WMV/V+ & 9WDMV/V+ [JP5A] always close [default].

*JP5B for Pentium® III only.

9WMV/V +Series User’s Manual

2-3

Clear CMOS:(JP6)

To clear the data stored in the CMOS, always turn off the computer first, then

remove this jumper to 2-3 pin to clear the CMOS. The jumper should be set to 1-2

pin (3V battery back up) before turn on the computer.

Keyboard Power On Selection

The keyboard power on selection function. If your ATX power supply can supports

700mA 5V standby current (with keyboard require).you can use this function.

states JP6

1Clear CMOS

2Normal [Default]

* Clear CMOS must be turn off the AC power first.

states JP1

1Enable this function

2Disable [Default]

*If your ATX power supply not support 100~300mA 5V

standby current. Don’t enable this function.

9WMV/V +Series User’s Manual

2-4

2-2System Memory (DIMM)

The motherboard supports up to 512MB PC-100 SDRAM. No hardware or BIOS

setup is required after adding or removing the system memory.

The Intel 810 chipset does not support ECC, However, ECC memory modules

may still be used, but the ECC function will not be available.

Note:

1.The motherboard uses only Dual Inline Memory Modules (DIMMs). Sockets are

available for 3.3Volt (power level) Synchronous Dynamic Random

Access Memory (SDRAM).

2.This motherboard does not support 66MHz SDRAM !. The PC-100 compliant

SDRAM must be used because of the strict timing issues involved under this

speed.

Installing system Memory

Insert the DIMM module(s) as shown. Because the number of pins are different on

each side of the breaks, the module will be fitted only in the orientation shown.

The DIMM must be 3.3V for this motherboard.

System memory blank table

Item Support Support

DIMM 1 Single side Double side

DIMM 2 Single side Double side

DIMM 3 Single side

* DIMM 3 support Single side SDRAM module only.

Ex.

9WMV/V +Series User’s Manual

2-5

ITEM DIMM 1 DIMM 2 DIMM 3 TOTAL SIZE

132MB-Single 32MB-Single 32MB-Single 96MB

232MB-Double 32MB-Single 32MB-Single 96MB

332MB-Double 32MB-Double Don’t use 96MB

464MB-Single 64MB-Single 64MB-Single 192MB

564MB-Double 64MB-Single 64MB-Single 192MB

664MB-Double 64MB-Double Don’t use 128MB

7128MB-Single 128MB-Single 128MB-Single 384MB

8128MB-Double 128MB-Single 128MB-Single 384MB

9128MB-Double 128MB-Double Don’t use 256MB

10 256MB-Single 256MB-Single Don’t use 512MB

11 256MB-Double 256MB-Single Don’t use 512MB

12 256MB-Double 256MB-Double Don’t use 512MB

2-3 Central Processing Unit (CPU)

The Motherboard provides a ZIF Socket 370 and a SLOT 1. The CPU that came

with the motherboard should have a fan attached to it to prevent overheating. If

this in not the case, then purchase a fan before you turn on your system. Be sure

that there is sufficient air circulation across the processor heat sink, or the

processor could overheat and damage both the processor and the motherboard.

To install a CPU, first turn off your system and remove its cover. Locate the ZIF

socket and open it by first pulling the lever sideways away from the socket then

upwards to a 90-degree angle. Insert the CPU with the correct orientation as

shown. The notched corner should point towards the end of the lever. Because

the CPU has a corner pin for two of the four corners, the CPU will only be fitted in

the orientation as shown. The picture is for reference only: you should have a

CPU fan that covers the top side of the CPU. With the added weight of the CPU

fan, no force is required to insert the CPU. Once completely inserted, close the

socket lever while holding down the CPU.

9WMV/V +Series User’s Manual

2-6

2-4Expansion Cards

Always unplug the power supply when adding or removing expansion cards or

other system components. Failure to do so may cause severe damage to both

your motherboard and expansion cards.

Expansion Card Installation Procedure The Motherboard has 3 PCI and 1 AMR

expansion slots. You may install up to 3 PCI cards and 1 AMR card on this

motherboard. To install the PCI cards or AMR card, please follow the following

procedure:

1.Read the documentation for your expansion card and make any necessary

hardware or software settings for you expansion card, such as jumpers or

switches.

2.Remove your computer system cover and the bracket plate with screw on the

slot you intend to use. Keep the bracket for possible future use.

3.Carefully align the card connectors and press firmly.

4.Secure the card on the slot with the screw you removed above.

5.Replace the computer system cover.

6.Setup the BIOS if necessary.

7.Install the necessary software drivers for your expansion card.

Note: To install the AMR Card. You should set the “AC97 Modem” as ”auto” in the

”INTEGRATED PERIPHERALS” of the BIOS Setup.

SLOT Area

AMR

PCI

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Fastfame

Fastfame

Fastfame 3SLAV2 Manual de usuario

Fastfame

Fastfame 9VAAV Manual de usuario

Fastfame

Fastfame 9W AP Series Manual de usuario

Fastfame

Fastfame 8VTAV Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario