Fastfame 3SLAV2 Manual de usuario
Copyright 2000 Publishing. All Rights Reserved.
This manual, software and firmware described in it are copyrighted by their respective owners
and protected under the laws of the Universal Copyright Convention. You may not reproduce,
transmit,transcribe,storeinaretrievalsystem,ortranslateintoanylanguage,inanyformorby
anymeans,electronic,mechanical,magnetic,optical,chemical,biological, molecular, manual,
orotherwise, any part ofthispublication without the expresswrittenpermission of the publisher.
All products and trade names described within are mentioned for identification purpose only.
No affiliation with or endorsement of the manufacturer is made or implied. Product names and
brands appearing in this manual are registered trademarks of their respective companies.
The information published herein has been checked for accuracy as of publishing time. No
representation or warranties regarding the fitness of this document for any use are made or
implied by the publisher. We reserve the right to revise this document or make changes in the
specificationsoftheproduct described therein at any time without notice and without obligation
to notify any person of such revision or change.
Printed in Taiwan.
User Manual V1.0
2
3SLAV2 User’s Manual
Item Checklist
Before you begin installing your motherboard, please make
sure that the following materials have been shipped:
This mainboard comes in a sturdy cardboard shipping
carton, which should contain the following items:
• The main board.
• This user manual.
• One Floppy disk drive cable.
• One Ultra DMA/66 IDE cable.
• One Serial port cable.
• Software utilities.
If you discover damaged or missing items, please contact your
retailer.
User’s manual Version: 1.0
Release Date: Aug. 2000
3
3SLAV2 User’s Manual
CONTENTS
Introduction .......................................................................5
1-1Introduction .......................................................................................5
1-2 Specifications....................................................................................5
1-3 Block Diagram ..................................................................................8
1-4 Main Board Layout with Default Setting .............................................9
1-5 Static Electricity Precautions ..........................................................10
Installation Procedures................................................... 11
2-1 Setting System Jumpers ................................................................ 11
2-2 System Memory (DIMM) .................................................................14
2-3 Central Processing Unit (CPU) ........................................................15
2-4 Expansion Cards.............................................................................15
2-5 External Connectors........................................................................16
2-6 Power Connection Procedures ........................................................23
AWARD BIOS Setup ........................................................24
3-1Introduction .....................................................................................24
3-2 Main Menu ......................................................................................26
3-3 Standard CMOS Setup....................................................................28
3-4 Advanced BIOS Features ................................................................31
3-5 Advanced Chipset Features/Integrated Peripherals ..........................34
3-6IntegraedPeripherals.......................................................................37
3-7 Power Management Setup ..............................................................41
3-8 PnP/PCI Configuration Setup...........................................................44
3-9 PC Health Status ............................................................................46
3-10 Frequency control..........................................................................46
3-11 Defaults Menu ...............................................................................47
4
3SLAV2 User’s Manual
3-12 Password Setting ..........................................................................48
3-13 Exit Selecting................................................................................49
Software Driver Install.....................................................50
4-1UPDATEDPRODUCTINFORMATION .............................................50
4-2 Install Graphics Driver .....................................................................53
4-3 Install Audio Driver...........................................................................56
4-4 ALC100 ALSRACK Application .......................................................59
Anti-Virus software installation ......................................63
5-1 Anti-Virus software installation ........................................................63
5
3SLAV2 User’s Manual
1-1 Introduction
The motherboard is a high-performance, low-cost motherboard which sup-
portstheIntel PIII FC-PGAandSocket370microprocessor. System memory
bank supports 3 DIMM socket. Memory up to 512MB 133MHZ SDRAM.
On-board include 4X AGP, ATX power, Super I/O, 2 Ultra DMA33/66/100
EIDE interfaces, 4 USB ports, 1 4X AGP Expansion Slot,6 PCI Expansion
slots, and 1 CNR Slot.
1-2 Specifications
CPU - Pentium III(r)/CeleronTM Processor.
- Celeron TM Socket 370 PPGA packaged Processor.
- 2 nd level Cache Depend on CPU.
- Coppermine Socket 370 FCPGA packaged Processor.
- Support Up 1GHz Processor Cooling FAN Spec.
- VIA Cyrix III Processor.
Chipset - INTEL FW82815 Graphics and memory controller Hub(GMCH).
- INTEL FW82801BA I/O Controller Hub(ICH2).
Clock Generator
- Supports 66 / 100 / 133 MHz FSB.
Memory - 3 x 168-pin DIMM Sockets.
- Supports 100MHZ & 133MHZ SDRAM 32MB~512MB.
- In- Supports only 3.3V SDRAM DIMM.
Introduction
6
3SLAV2 User’s Manual
VGA - Integrated 2D/3D graphics chip(GMCH).
- Integrated 24-bit 230MHz RAMDAC.
- Support 4MB max Display Cache at AIMM Card.
- 2D graphics Up 1600x1200 in 8-bit Color at 85 Hz Refresh.
-H/W Motion CompensationAssistance for S/W MPEG2Decode.
- Software DVD at 30fps.
Audio - Supports AC97 CODEC (Avance Logic ALC100).
- Supports earphones, two channel speaker mode.
- MPU-401 Game/MIDI port and Sound blaster®16 compatible.
- Avance Logic. Sound Effects Utility Support Four Surround
Mode and KaraOK Mode.
I/O Controller
- ITE I8712F Low Pin Count(LPC) interface.
Expansion Slot
-Six 32-bitPCI slots supportMastermode.PCIRev2.2 Compliant.
- One AGP Slot support 1x 2x 4x Data Rate.
- One CNR Slot.
I/O Interface
- PCI Bus master IDE interface on board with two connectors
support 4 IDE devices in 2 channel, the PCI IDE Controller
supports PIO Mode 0 to Mode 4, Bus master IDE DMA Mode 2
and Ultra DMA 33/66/100.
- On board super Multi-I/O chip that support 2 serial port with
16550 Fast UART compatible, 1 parallel port with EPP and
ECP capabilities, and a floppy disk drive interface.
- On board support PS/2 mouse Connector.
- On board support PS/2 Keyboard Connector.
- On board 4 USB ports.
- On board IrDA connector.
- Floppy port supports 2 FDD with 360K, 720K,1.2M,1.44M and
2.88M bytes ,Supports LS-120 floppy disk device.
Other Function
7
3SLAV2 User’s Manual
- Support Modem Ring Power On.
- Supports Keyboard, and WOL (Wake On LAN).
- CPU Work Clock auto detection by BIOS.
Power Supply
- On board 3V, 5V and 12V 20-pin ATX power connector.
- Use switching regulator to support CPU core voltage.
- CPU Core voltage auto detection.
Hardware Monitor
- CPU/Power Supply/Chassis Fan Revolution detecting.
- CPU Fan Control.
- System Voltage Detect.
- Display Actual Current Voltage.
BIOS - Licensed AWARD BIOS, 4M bit Firmware Hub.
- ACPI ready for PC98/Windows 98.
-SystemBIOS supportsACPIfunctionandGreen featurefunction,
DMI, Plug and Play Flash ROM.
Form factor
- ATX Form Factor.
- Dimensions 305mm x 200mm, 4 layers PCB.
Drivers
- Intel®815 Chipset Graphics Drivers.
- INF Update Utilities.
- AC97 audio sound drivers.
- Virus Protection Applications.
- DirectX 7.0.
8
3SLAV2 User’s Manual
1-3 Block Diagram
9
3SLAV2 User’s Manual
1-4 Main Board Layout with Default Setting
System default support PIII(100/133MHz FSB) and Celeron
CPU
10
3SLAV2 User’s Manual
1-5 Static Electricity Precautions
Static electricity can easily damage your motherboard.
Observing a few basic precautions can help you safeguard against damage
that could result in expensive repairs. Follow the measures below to protect
your equipment from static discharge:
Keep the motherboard and other system components in their antistatic
packaging until you are ready to install them.
Touch a grounded surface before you remove any system component from
its protective antistatic packaging. A grounded surface within easy reach
is the expansion slot covers at the rear of the system case. or any other
unpainted portion of the system chassis.
During configuration and installation, touch a ground surface frequently to
discharge any static electric charge that may build up in your body. An-
other option is to wear a grounding wrist strap.
When handling a motherboard or an adapter card, avoid touching its
components.Handlethemotherboardandadaptercardseitherbythe edges
or by the mounting bracket that attaches to the slot opening in the case.
Tabla de contenidos
Otros manuales de Placa madre de Fastfame
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
