Ezviz C6P Manual de usuario

Tabla de contenidos

Otros manuales de Cámara digital de Ezviz

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario

1

Setup

Step1: Power on

Use power adapter to power up the camera.

Power Socket

Power Adaptor

Step 2: Camera Setup

1. Create an user account.

- Connect your mobile device to Wi-Fi.

- Search “EZVIZ” in App Store or Google PlayTM to download.

- Launch the App and register an EZVIZ user account.

2. Add Camera to EZVIZ.

- Log in the EZVIZ App.

- At the Home screen, tap “+” on the upper-right corner to go to the scanning QR code

interface.

2

- Scan the QR Code on the bottom of the camera or enter the SN Serial No. on the label.

- Tap “Add” and wait Camera's automatic linkage until LED indicator ﬂashes in Blue.

3. Enable the Image Encryption.

After enabling it, your video and image can be encrypted in transmission.

You can also change the default password.

- Go to the camera settings.

- Tap “Change Password”.

- Tap “Edit”.

- Enter the original veriﬁcation code located on the label of the camera.

- Enter new password (6 to 12 characters and numbers).

3

Mounting Procedure (Optional)

The camera can be mounted on the wall or ceiling.

• Make sure the wall/ceiling is strong enough to withstand three times the weight of the camera

and the mounting.

• Camera should stay away from any reﬂective objects such as mirrors.

1. Place drill template onto the surface you have chosen to mount the camera.

2. (For cement wall/ceiling only) Drill screw holes according to the template and insert three

expansion screws.

3. Use three metal screws to ﬁx the camera base according to the template.

Power cable places here.

UP Logo

Screw Hole

4. Fix the base cover on the base (OPEN right on the UP).

Base Cover

Base

5. Mount the camera to the base with the power interface near the power cable.

4

Appendix

Camera Basics

MIC

LED Indicator

MicroSD

Card Slot

QR Code

RESET

Speaker

Power Input

Name Description

MIC For audio in.

Speaker For audio out.

LED Indicator • Flashing Red and Blue: Camera is ready for the Wi-Fi connection.

• Steady Blue: Video is being viewed or played back in EZVIZ App.

• Slowly Flashing Blue: Camera is running properly.

• Steady Red: Camera is starting up.

• Slowly Flashing Red: Wi-Fi connection has failed.

• Fastly Flashing Red: MicroSD card error.

MicroSD Card Slot MicroSD card not included in the Box Contents. Recommended compatibility:

Class 10, Max.128GB. If a SD card is used, video ﬁles will be stored in the SD card.

RESET Press RESET for 10 seconds while the camera is running, the camera restarts and

all parameters are reset to default.

Power Input 5V±5%

To connect to a different Wi-Fi network, press RESET for 10 seconds to restart the camera and then

reconnect to Wi-Fi when indicator ﬂashes in red and blue.

5

Box Contents

Camera (x1) Base (x1) Power Cable (x1) Quick Start Guide (x1)

Screw Kit (x1) Power Adapter (x1) Base Cover (x1) Drill Template (x1)

SD Card Management

Insert a MicroSD card into the slot before mounting.

1. In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the SD card status.

6

2. If the memory card status displays as Uninitialized, tap to initialize it.

The status will then change to Normal and it can store videos and/or pictures.

Troubleshooting

Q: “The device is ofﬂine.” or “The device is not registered.” prompts appear when adding the camera

using the EZVIZ App.

A: 1. Make sure the network that the camera is connected to is working properly and the router’s

DHCP is enabled.

2. Press RESET for 10s to reset the settings if you change the network parameters.

Q: The mobile phone cannot receive alarm prompts when the camera is online.

A: 1. Make sure the EZVIZ App is running on your mobile phone.

2. For Android OS mobile phone, make sure the App is running in the background; and for iOS mobile

phones, enable the message push function in “Settings > Notiﬁcation”.

Q: Does the camera support power via USB devices or a portable battery?

A: It’s advised to use the EZVIZ standard power adapter to provide the stable voltage supply.

For more information, please visit www.ezvizlife.com.