Extron electronics USB HUB4 Series Manual de usuario

IMPORTANT:

Go to www.extron.com for the complete

user guide, installation instructions, and

specifications before connecting the

product to the power source.

USB HUB4 Series • Setup Guide

This guide provides basic instructions for setting up the Extron USB HUB4 Series AAP and MAAP.

HUB4 USB MAAP HUB4 USB AAP

ACTIVITY ACTIVITY

USB HUB4 MAAP USB HUB4 AAP

ACTIVITY ACTIVITY

Installation

Step 1 — (Optional) Install the wall box or mounting bracket

If using an electrical wall box or a mounting bracket, install it in the wall or furniture (see Mounting in the USB HUB4 Series User

Guide available at www.extron.com).

Step 2 — Mount the HUB4 onto a mounting frame

Attach the USB HUB4 AAP or USB HUB4 MAAP to an appropriate AAP or MAAP sized mounting frame, rack space frame, or

other Extron architectural product (see Mounting in the USB HUB4 Series User Guide).

Step 3 — Connect the USB HUB4 to the host computer

For ease of installation, connect the USB HUB4 to the host computer in either of the following ways:

• Using the Type mini-B USB port: Connect a Type A to Type mini-B cable (provided) to the

USB mini-B port on the USB HUB4 rear panel.

• Using the green captive screw USB In port: Remove the Type B or Type mini B terminator

from a Type A to B or Type A to mini-B USB cable and insert the cable wires into the 5-pole

USB In port as shown below and at right. This method may be necessary if space is limited.

(See Connecting to the captive screw USB port in the USB HUB4 Series User Guide.)

NOTE: Choose one of these two methods to connect the HUB4 to the host computer.

Do not connect the host computer to both HUB4 ports at the same time.

Wire color Port

Braided shield

V+ (+5 VDC)

Red

S (Shield)

White D- (Data -)

Green D+ (Data +)

Black –(Ground)

USB IN

RWGB

+V D- D+ S

IN OUT

WIRE COLOR

POWER

12V

1.1A MAX

Braided Shield / S

Red / +V

White / D

Green / D+

Black /

USB Cable (6')

To Host

Computer

USB Port

Type A

USB

Strip 1"to 2"from the outer jacket

of the USB cable to expose the wires.

USB HUB4 AAP

Captive

Screw

USB

Connector

Type mini B

USB Connector

Mounting

Frame

Rear

Step 4 — (Optional) Wire power connector

The USB HUB4 can be powered by the host computer. However, if the USB peripheral devices

connected to the USB HUB4 require more power than the USB HUB4 can provide, wire an

optional Extron PS 1215 1.5 A, 12 VDC power supply to the 12VDC Power In ports 1 and 2 on the

rear panel, as shown at right.

ATTENTION:

• For use only with UL Listed Extron products which accept Architectural Adapter Plates

(AAPs) or Mini Architectural Adapter Plates (MAAPs).

• À utiliser uniquement avec les produits Extron certifiés UL qui acceptent des plaques

d’adaptation architecturale (AAP) ou des mini-plaques d’adaptation architecturale

(MAAP).

USB IN

RWGB

+V D- D+ S

IN OUT

WIRE COLOR

POWER

12V

1.1A MAX

SECTION A–A

Power Supply

Output cord

68-1735-50 Rev. C

08 22

For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the

Extron Safety and Regulatory Compliance Guide on the Extron website.

All trademarks mentioned are the property of their respective owners.

Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876

Connecting additional Extron devices

If using an additional Extron device, such as a WM Series Extender, with the external power supply, connect the device power

cord to the 12 VDC Power Out ports 3 and 4 (see image below).

Maximum: Maximum peaking

and gain

Medium: Mid-level peaking

and gain

Normal: Unity gain

Circuit

board

Faceplate

www.extron.com

33-612-01 D

02 05

9-18 VDC

Power

Audio

EXTENDER WM AAP

AUDIO IN

USB HUB4 AAP

ACTIVITY

USB IN

RWGB

+V D- D+ S

IN OUT

WIRE COLOR

POWER

12V

1.1A MAX

Rear

Front

Extender WM AAP

USB HUB4 AAP Desktop Powe

Supply

Power Loop Out

Step 5 — (Optional) Mount unit in wall box

If using an electrical box, mount the USB HUB4 and the attached mounting frame onto the

box (see the image at right). If using a mounting bracket, this step is not needed.

Step 6 — Connect peripheral devices

Attach the peripheral USB devices to the front panel USB Type A ports.

Step 7 — Power on

Power on the host computer and the desktop power supply (if applicable). Check the front

panel power indicator LED to verify that the HUB4 is receiving power.

Wall opening

flush with

edge of box

Extron

CPM101

Mounting

Frame

Extron

USB HUB4

USB Hub

VTT001MAAP

POWER

USBHUB4 MAAP

ACTIVITY

Otros manuales para USB HUB4 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Extron electronics

Extron electronics

Extron electronics SW2 DVI A Manual de usuario

Extron electronics

Extron electronics DTP2 T 203 Manual de usuario

Extron electronics

Extron electronics VSW 2VGA A Manual de usuario

Extron electronics

Extron electronics MSW 4SV rs Manual de usuario

Extron electronics

Extron electronics Extron SW 2 VGAcc Manual de usuario

Extron electronics

Extron electronics SW12 VGA Ars Manual de usuario

Extron electronics

Extron electronics FOX Matrix 320x Manual de usuario

Extron electronics

Extron electronics FOX 4G SW8 Manual de usuario

Extron electronics

Extron electronics Matrix 12800 Series Manual de usuario

Extron electronics

Extron electronics RGB 320 Manual de usuario

Extron electronics

Extron electronics ISS 612 Manual de usuario

Extron electronics

Extron electronics IN1604 DTP Manual de usuario

Extron electronics

Extron electronics MMX 62 AV RCA Manual de usuario

Extron electronics

Extron electronics USB HUB4 AAP Manual de usuario

Extron electronics

Extron electronics MPS 409 Manual de usuario

Extron electronics

Extron electronics SW HD 4K PLUS Series Manual de usuario

Extron electronics

Extron electronics PVS 407D Manual de usuario

Extron electronics

Extron electronics IP LINK IPL T PCS4 Manual de usuario

Extron electronics

Extron electronics MPS 602 Manual de usuario

Extron electronics

Extron electronics SW2 VGA DA2 AF R Manual de usuario

Extron electronics

Extron electronics XTP T USW 103 Manual de usuario

Extron electronics

Extron electronics MLS 608 D SA Manual de usuario

Extron electronics

Extron electronics VGA MATRIX SWITCHERS MVX PLUS 128 Manual de usuario

Extron electronics

Extron electronics Converter CVC 200 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario