Extech Instruments 461895 Manual de usuario

INSTRUCTION MANUAL

English / Espanola

Model 461895

COMBINATION CONTACT/PHOTO TACHOMETER

1. INTRODUCTION

Congratulations on your purchase of Extech's Combination Contact/Photo Tachometer,

Model 461895. The combination tachometer is a patented design providing contact and

non-contact RPM measurements. In addition, linear surface speeds can be measured in

ft/min. or m/min.

Features

•Use of an exclusive micro-computer LSI-circuit and crystal time base offers high 0.05%

accuracy and fast measuring time

•RPM measurements span wide ranges: 5 to 99,999 RPM for photo tachometer and 0.5

to 20,000 RPM for contact tachometer

•Suppression of insignificant zeroes in large, 5 digit LCD display provides exact RPM

while saving battery power

•Last value and last max/min readings can be automatically stored and recalled

actoolsupply.com

Extech 461895 Combination Contact Photo Tachometer

Extech 461895-NIST Combination Contact Photo Tachometer

461895 V1.8 August 2001

2. SPECIFICATIONS

2-1 General Specifications

Circuit Custom one-chip LSI microprocessor circuit.

Time base Quartz crystal

Display 5 digit, 10 mm (0.4") LCD display with function annunciation

Measurement Photo Tachometer - 5 to 99,999 rpm

Contact Tachometer - 0.5 to 19,999 rpm

Surface Speed - 0.2 to 6,560 ft/min

Surface Speed - 0.05 to 1,999 m/min

Memory Last value, last max. reading, last min. reading

Sampling Time Photo Tachometer - 1 sec. (over 60 rpm)

Contact Tachometer - 1 sec. (over 6 rpm)

Detecting Distance -

Photo Tachometer

50 to 150 mm (2 to 6 inches) depending on ambient light

Operating Temperature 32 °F to 122 °F (0 °C to 50 °C)

Power Supply 4x 1.5 V AA (UM 3) batteries

Weight 0.66 lbs. / 300g (including battery)

Size 8.5 x 2.6 x1.5” (215 x 65 x 38mm)

Accessories Reflective tape (23"), cone and funnel rpm adaptor, surface

speed test wheel, and carrying case

2-2 Electrical Specifications

Measurement Range Resolution Accuracy (% rdg)

Photo

Tachometer

5 to 99,999 rpm 0.1 rpm (0.5 to 999.9 rpm)

1 rpm (over 1000 rpm)

Contact

Tachometer

0.05 to 19,999 rpm 0.1 rpm (0.5 to 999.9 rpm)

1 rpm (over 1000 rpm)

+ (0.05% + 1 digit)

Surface

Speed

0.2 to 6560 ft/min 0.1 ft/min (0.1 to 999.9 ft/min)

1 ft/min (over 1000 ft/min)

Surface

Speed

0.05 to 1999.9

m/min

0.01 m/min (0.05 to 99.99 m/min)

0.1 m/min (over 100 m/min)

± (1% rdg + 1d)

3. FRONT PANEL DESCRIPTION

3-1 Reflective tape

3-2 Signal light beam

3-3 Monitor indicator

3-4 Display

3-5 Measure button

3-6 Memory button

3-7 Function switch

3-8 Rotating ring

3-9 Circumferential speed ring

3-10 Battery compartment

3-1

3-2

3-3

3-4

3-6

3-7

3-8

3-9

3-5

3-10

actoolsupply.com

461895 V1.8 August 2001

4. OPERATION

4.1 Photo Tachometer

a) Slide the Function Switch to the "rpm PHOTO" position.

b) Apply a 0.5” (12mm) square piece of reflective tape to the object being measured.

c) Press the Measure button and align the visible light beam with the object being

measured. Check that the Monitor Indicator lights when the reflective tape

passes through the light beam. Release the Measure button once the display

stabilizes (approx. 2 seconds). For best results, hold the meter's light source 6 -

12" from the object being measured (low ambient light recommended).

d) If the RPM measurement is less than 50, apply additional squares of reflective

tape (equidistant). Divide the reading shown on the display by the number of

reflective squares to get the actual RPM.

NOTE: Bright ambient light may interfere with the reflected light beam. Shading the

target area may be necessary in some cases.

CAUTION: Rotating objects can be dangerous. Use extreme care when holding the

meter near any such object.

4.2 Contact Tachometer

a) Slide the Function Switch to the "rpm CONTACT" position.

b) Press the Measure button while lightly pressing the rotating ring against the

center opening of a rotating shaft. Release the Measure button once the display

has stabilized (approx. 2 seconds).

4.3 Surface Speed Measurement

a) Slide the Function Switch to "SURFACE SPEED ft/min" or "m/min".

b) Affix the Surface Speed Wheel on the meter shaft.

c) Press the Measure button and hold the surface speed wheel against the device

being measured. Release the Measure button once the display has stabilized

(approx. 2 seconds).

4.4 Memory Recall

When measuring, the last reading and last max and min values are automatically

stored before the Measure button is released. Recall the values by pressing the

Memory button the appropriate number of times (see below).

a) Press once and hold - the last value is displayed followed by "LA"

b) Press again and hold - the maximum value is displayed followed by "UP"

c) Press again and hold - the minimum value is displayed followed by "dn"

5. BATTERY REPLACEMENT

5.1 The low battery indication appears as a "LO" on the display.

5.2 To replace the battery:

a) Loosen the screw on the battery cover (3-10, Fig. 1) and remove.

b) Replace with 4 x 1.5V AA batteries and replace cover.

actoolsupply.com

461895 V1.8 August 2001

6. CALIBRATION / REPAIR SERVICES

Extech offers complete repair and calibration services for all of the products we sell.

For periodic calibration, NIST certification or repair of any Extech product, call customer

service for details on services available. Extech recommends that calibration be

performed on an annual basis to insure calibration integrity.

7. WARRANTY

EXTECH INSTRUMENTS CORPORATION warrants this instrument tobe free of defects in parts and

workmanship for one year from date of shipment (a six month limited warranty applies on sensors and

cables). Ifit should become necessary to return the instrument for service during or beyond the warranty

period, contact the Customer Service Department for authorization. A Return Authorization (RA) number

must be issued before any product is returned to Extech. The sender is responsible for shipping charges,

freight, insurance and proper packaging to prevent damage in transit. This warranty does not apply to

defects resulting from action of the user such as misuse, improper wiring, operation outside of

specification, improper maintenance or repair, or unauthorized modification. Extech specifically disclaims

any implied warranties or merchantability or fitness for a specific purpose and will not be liable for any

direct, indirect, incidental or consequential damages. Extech's total liability is limited to repair or

replacement of the product.

The warranty set forth above is inclusive and no other warranty, whether written or oral, is expressed or

implied.

actoolsupply.com

Otros manuales para 461895

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Extech Instruments

Extech Instruments

Extech Instruments PQ34-12 Manual de usuario

Extech Instruments

Extech Instruments MO270 Manual de usuario

Extech Instruments

Extech Instruments EA80 Manual de usuario

Extech Instruments

Extech Instruments AN340 Manual de usuario

Extech Instruments

Extech Instruments MO230 Manual de usuario

Extech Instruments

Extech Instruments EA30 Manual de usuario

Extech Instruments

Extech Instruments CO230 Manual de usuario

Extech Instruments

Extech Instruments 480826 Manual de usuario

Extech Instruments

Extech Instruments 461920 Manual de usuario

Extech Instruments

Extech Instruments 407706 Manual de usuario

Extech Instruments

Extech Instruments TM100 Manual de usuario

Extech Instruments

Extech Instruments SDL300-NIST Manual de usuario

Extech Instruments

Extech Instruments 407735 Manual de usuario

Extech Instruments

Extech Instruments LT250W Manual de usuario

Extech Instruments

Extech Instruments MA150-T Manual de usuario

Extech Instruments

Extech Instruments 380976-K Manual de usuario

Extech Instruments

Extech Instruments AN320 Manual de usuario

Extech Instruments

Extech Instruments 380580 Manual de usuario

Extech Instruments

Extech Instruments CO10 Manual de usuario

Extech Instruments

Extech Instruments AN250W Manual de usuario

Extech Instruments

Extech Instruments PQ3450-30 Manual de usuario

Extech Instruments

Extech Instruments SDL600 Manual de usuario

Extech Instruments

Extech Instruments HD450 Manual de usuario

Extech Instruments

Extech Instruments MA610 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario