Explore Scientific RDP1002 Manual de usuario

EN INSTRUCTION MANUAL ...................... 2

IT ISTRUZIONI PER L’USO ..................... 14

DE BEDIENUNGSANLEITUNG .................. 26

FR MODE D‘EMPLOI............................... 38

ES MANUAL DE INSTRUCCIONES............ 50

*Radio-controlled clock function not available in all territories. / Funzione di orologio radiocontrollati non disponibile in ogni territorio. / Funkuhrfunktion nicht in

jedem Gebiet verfügbar. / La fonction d‘horloge radio-piloté n‘est pas disponible dans tous les territoires. / La función de reloj radiocontrolado no está disponible

en todos los territorios.

RADIO-CONTROLLED* ALARM CLOCK

SVEGLIA RADIOCONTROLLATA*

FUNKWECKER*

RÉVEIL RADIO-COMMANDÉ*

DESPERTADOR RADIO-CONTROLADO*

Art.No.: RDP1002

ABOUT THIS INSTRUCTION MANUAL

These operating instructions are to be considered a

component of the device.

Please read the safety instructions and the operating

instructions carefully before use.

Keep these instructions for renewed use at a later date.

When the device is sold or given to someone else, the

instruction manual must be provided to the new owner/

user of the product. The device is intended only for indoor

use.

GENERAL WARNINGS

•Risk of electric shock — This device contains elec-

tronic components that operate via a power source

(power supply and/or batteries). Children should

only use the device under adult supervision. Only

use the device as described in the manual; other-

wise, you run the risk of an electric shock.

• Choking hazard —Children should only use the de-

vice under adult supervision. Keep packaging mate-

rial, like plastic bags and rubber bands, out of the

reach of children, as these materials pose a choking

hazard.

• Risk of chemical burn —Keep batteries out of the

reach of children! Make sure you insert the batteries

correctly. Leaking battery acid can lead to chemical

burns. Avoid contact of battery acid with skin, eyes

and mucous membranes. In the event of contact,

rinse the affected region immediately with a plenty

of water and seek medical attention.

• Risk of re/explosion —Do not expose the device to

high temperatures. Use only the recommended bat-

teries. Do not short-circuit the device or batteries, or

throw them into a re. Excessive heat or improper

handling could trigger a short-circuit, a re, or an

explosion.

• Do not disassemble the device. In the event of a de-

fect, please contact your dealer. The dealer will con-

tact the Service Centre and can send the device in to

be repaired, if necessary.

• Use only the recommended batteries. Always re-

place weak or empty batteries with a new, complete

set of batteries at full capacity. Do not use batteries

from different brands or with different capacities.

The batteries should be removed from the unit if it

has not been used for a long time.

SCOPE OF DELIVERY

Alarm clock, Power adapter, Operating instructions, 2x

AAA batteries.

BEFORE YOU BEGIN

• We recommend using alkaline batteries. If tempera-

tures regularly fall below 0°C (32°F), we recommend

using lithium batteries.

• Avoid using rechargeable batteries. (Rechargeable

batteries cannot maintain correct power require-

ments.)

• Insert batteries before rst use, matching the polar-

ity in the battery compartment. 2x AAA Batteries are

required.

 

PRODUCT OVERVIEW

1. Press [ ] to activate the snooze function,

backlight and projection. Press and hold to

toggle projection on/off.

2. Projection lens.

3. In date mode, press [ ] to turn on/off

zone. In alarm time mode, press to turn on/off

alarm. Press and hold to enter time and date

setting.

4. Press [ ] to show alarm time of Alarm 1-5

and Alarm 6-7. Press and hold to enter alarm

setting.

5. Press [ ] to switch between temperature,

second and weekday display. Press and hold to

start RCC* signal receiving. In setting mode,

press to increase one unit, press and hold to

increase rapidly.

*Radio-controlled clock function not available in every territory







OUTPUT

5V 1A

  



6. Press [ ] to switch between date

mode and the nearest coming alarm time.

In projection, press and hold to flip the

projection display in 180°. In setting mode,

press to decrease one unit, press and hold to

decrease rapidly.

7. Power jack.

8. Battery compartment. Slide down to open.

9. USB charging port.(To charge USB devices).

LCD DISPLAY

1. Time display

2. Date display or Alarm time display

(Press [ ] to switch)

3. Temperature display or weekday display

(Press [ ] to switch)

[ ] RCC signal received

[ ] Alarm ON

[ ] DST ON (Daylight Saving Time)

[ ] Snooze activated

[ ] Low battery indicator

[ ] Temperature mode





GETTING STARTED

INSERT BATTERIES

1. Remove the battery door from the back.

2. Insert 2x AAA (LR03)/1.5V batteries. Please ensure

the polarities (+/-) of the batteries match upon

installation.

3. Reattach the battery door.

NOTE: Replace batteries when [ ] displays, or when

the display is dim.

DC POWER ADAPTER

Only use a compatible DC Power adapter (5V

1000mA). Plug the power cable to the power jack and

the power adapter to a suitable power outlet.

NOTE: We recommend to insert batteries as backup

power source.

CLOCK

CLOCK RECEPTION

1. Replace batteries or press [ ] button will initiate

RCC receiving.

2. RCC receiving can work in both date mode and alarm

mode.

3. The receiving process duration is 10 minutes.

4.During receiving process, the RCC signal symbol

[ ] flashes.

5. If the RCC receiving process is successful, a completed

RCC symbol [ ] will be shown in the display and the

date and time will be set automatically. If it fails within

10 minutes, RCC setting will quit automatically. If that

happens, press [ ] button to re-initiate RCC

receiving.

6. RCC receiving will automatically start at 1:00, 2:00,

3:00, 4:00, 5:00 or 6:00 every night. Auto receiving

function will cease if it is successful.

7.To stop RCC reception, press the [ ] button.

8. If the device is still not receiving the signal, please

proceed to set the time manually.

NOTE: When using a power adapter, please increase the

separation of the main unit and the power adapter to

avoid interference of RCC signal receiving.

SET THE CLOCK MANUALLY

1. Press and hold [ ] button to enter time and

date setting.

2.The setting parameter will flash.

3. Press [ ] button once, the figure will increase

1 unit (when setting minute, second will reset to 0).

Press and hold the [ ] button, the figures will

increase rapidly.

4. Press [ ] button once, the figure will decrease

1 unit (when setting minute, second will reset to 0).

Press and hold the [ ] button, the figures will

decrease rapidly.

5. Press [ ] button to confirm setting and enter

to next parameter.

6.Sequence of setting: Weekday Language 12/24 Hr

Year (2000 – 2099) Date format Month 

Date Hour Minute Zone °C/°F  Exit

7. If there is no action in 20 seconds, the setting will be

saved and will exit the setting mode.

LANGUAGE

Sequence of setting weekday language:

German (GER)  English (ENG)  French (FRE) 

Italian (ITA) Dutch (DUT).

German English French Italian Dutch

Symbol GER ENG FRE ITA DUT

Monday MON MON LUN LUN MAA

Tuesday DIE TUE MAR MAR DIN

Wednesday MIT WED MER MER WOE

Thursday DON THU JEU GIO DON

Friday FRE FRI VEN VEN VRI

Saturday SAM SAT SAM SAB ZAT

Sunday SON SUN DIM DOM ZON

TIME ZONE SETTING

To set a different time zone, proceed as follows:

1.Press and hold [ ] button, enter time and date

setting.

2.Press [ ] button several times until the display

shows the time offset “Zone 00”

3.Press the [ ] button to increase or

[ ] button to decrease the Time zone offset.

°C/°F SETTING

1.Press and hold [ ] button, enter time and date

setting.

2.Press [ ] button several times until the display

shows °C/°F.

3.Press the [ ] or [ ] button to switch

Celsius (°C) / Fahrenheit (°F).

ALARM

SETTING/ADJUSTING DUAL ALARM TIME

You can set one alarm time for weekdays, (Monday

to Friday / 1-5) and one alarm time for the weekend

(Saturday to Sunday / 6-7).

Alarm 1 = Weekday alarm (1-5)

Alarm 2 = Weekend alarm (6-7)

1. Press and hold [ ] button, enter alarm setting.

2. Sequence of setting: Alarm 1 (1-5) weekday hour 

weekday minute Alarm 2 (6-7) weekend hour 

weekend minute exit

3. During setting, the setting parameter will flash.

4. Press [ ] button once to increase by 1 or press

[ ] once to decrease by 1. Alternatively press

and hold the [ ] button to change the figures

rapidly.

5. Press [ ] button to confirm setting and enter to next

parameter.

6. Press [ ] button to turn on/off alarm.

7. The alarm will sound when the alarm setting is finished

and turned on.

8. If there is no action in 20 seconds, the setting will be

saved and will exit the setting mode.

TURN ON/OFF ALARM

1. Press the [ ] button once to turn on/off the

alarm that is nearest in time. (1-5) or (6-7) will flash

to indicate which alarm was activated.

How to activate alarm times individually:

2. Press [ ] button once to switch to alarm mode.

Monday to Friday alarm time will be shown and (1-5)

will flash.

3. Press [ ] button once to turn on/off Monday

to Friday alarm.

4. Press [ ] button again to show Saturday to Sunday

alarm time. (6-7) will flash.

5. Press [ ] once to turn on/off Saturday to

Sunday alarm.

OPERATION

1. At the set time, alarm signal rings.

2. During the alarm, press the [ ] button to delay

the alarm by 8 minutes.

3. If you do not press any button to stop the alarm, it

will automatically turn off after 5 minutes.

4. To stop the alarm, press the [ ] or any other button.

5. The alarm will start again at the next alarm time,

unless you switch off the alarm function by pressing

the [ ] button.

PROJECTION

The projector displays the time on your ceiling or wall

and it can rotate 180°. It is easier to view in a darkened

room. For the optimal projection results, place the unit

within 1.5 - 2 m (5-6.5 ft) from the ceiling or wall.

1. Press [ ] button to activate the backlight and

projection for 5 seconds.

2. Press and hold [ ] button, flip the projection

display 180°.

3. Press and hold [ ] button, toggle continues

projection on in case of using adapter power source

and toggle projection on for 5 minutes in case of

using batteries power only. Press and hold [ ]

button again, turn off projection and toggle continues

projection off.

NOTE: The projection is disabled during the RCC signal

reception.

SPECIFICATIONS

Dimensions (Main unit):

Tabla de contenidos

Idiomas:

Otros manuales de Despertador de Explore Scientific

Explore Scientific

Explore Scientific RDC3006-CM3000 Manual de usuario

Explore Scientific

Explore Scientific RDC1004-CM3000 Manual de usuario

Explore Scientific

Explore Scientific RPW3008 Manual de usuario

Explore Scientific

Explore Scientific RDC3006 Manual de usuario

Explore Scientific

Explore Scientific RDP1001-CM3000 Manual de usuario

Explore Scientific

Explore Scientific NDC1004 Manual de usuario

Explore Scientific

Explore Scientific RDP3007-CM3000 Manual de usuario

Explore Scientific

Explore Scientific RPW3008-CM3000 Manual de usuario

Explore Scientific

Explore Scientific RDP3007 Manual de usuario

Explore Scientific

Explore Scientific RDP1003-CM3000 Manual de usuario

Explore Scientific

Explore Scientific RDC1000 Manual de usuario

Explore Scientific

Explore Scientific RDC1005 Manual de usuario

Explore Scientific

Explore Scientific RDC8001 Manual de usuario

Explore Scientific

Explore Scientific RPW3008 Manual de usuario

Explore Scientific

Explore Scientific RDC1008 Manual de usuario

Explore Scientific

Explore Scientific RDC1005-CM3000 Manual de usuario

Explore Scientific

Explore Scientific BCR2001 Manual de usuario

Explore Scientific

Explore Scientific RDP1001 Manual de usuario

Manuales populares de Despertador de otras marcas

Steren

Steren CLK-210 Manual de usuario

COP-USA

COP-USA ALCDVR32-SL Manual de usuario

Philips

Philips HF3505/70 Manual técnico

Casio

Casio PQ-70 Manual de usuario

iHome

iHome IA63 Manual de usuario

Coopers

Coopers 9765 Manual de usuario

ANJANK

ANJANK AC-190 Guía

TFA

TFA 98.1075 Manual de usuario

Sharper Image

Sharper Image 204050 Manual de usuario

Lumie

Lumie Zest Manual de usuario

Dexford

Dexford RCT200 Manual de usuario

Philips

Philips AJL303/37B Manual de usuario

RST

RST Q754 Manual de usuario

iHome

iHome iKT50 Manual de usuario

Sony

Sony dash HID-B7 Manual de usuario

SVINZ

SVINZ SCC009 Manual de usuario

Clas Ohlson

Clas Ohlson 918863 Manual de usuario

IKEA

IKEA FNURRA Manual de usuario