Excalibur RF-50-EDP Manual de usuario
RF-50-EDP
Deluxe 2-way OEM Upgrade & Range Extender
October 25, 2012
Operation Guide
Table Of Contents
Controller & Transmitter Overview................................................................ 3
The 2-Way Controller ............................................................................... 3
The 1-Way Transmitter............................................................................. 3
Controller & Transmitter Functions............................................................... 4
Other Remote Start Features ....................................................................... 8
Low Battery/Low Temp Automatic Starting............................................... 8
Pit-Stop Feature ....................................................................................... 8
Security System Features ............................................................................ 9
Last Door Locking/Arming........................................................................ 9
Automatic Re-locking ............................................................................... 9
2-way Trigger Alerts ................................................................................. 9
Using The Valet Switch............................................................................... 10
Emergency Override .............................................................................. 10
The Status Light ......................................................................................... 10
Multi-Car Operation (2-way controller only).................................................11
Selecting CAR #1 or CAR #2 ..................................................................11
Controller Options....................................................................................... 12
LCD Screen Icons .................................................................................. 12
In-Range Indicator.................................................................................. 12
Selecting Melody & Vibrate modes ........................................................ 12
Setting The Clock................................................................................... 13
Changing Remote Start Melodies .......................................................... 13
Button Lock ............................................................................................ 13
Parking Timer & Remote Start Timer ..................................................... 14
Programming Controllers/Transmitters....................................................... 14
Programming Features............................................................................... 15
Programmable Features............................................................................. 15
Programmable Features Matrix.................................................................. 19
3
THE 2-WAY CONTROLLER
Controller & Transmitter Overview
Controller part number: 154-03
1) LCD Display: Displays all controller functions as well as the
status of your system.
2) Control Buttons: Lock, Unlock, Trunk Release, Remote Start
3) Programming Button
Battery Type: CR2032 (two required)
1
“lock”
button
“trunk”
button
“unlock”
button
“start”
button
Transmitter part number: 148-03
Call your dealer or visit www.caralarm.com to order
replacement transmitters.
Transmitter battery replacement:
Remove the small screw from the lower back
case, and separate the transmitter halves. Replace
the two CR2016 batteries and reassemble the
transmitter case.
THE 1-WAY TRANSMITTER
2
3
NOTE: This system will also respond to the lock, unlock, and trunk commands
from your factory keyless entry remote on compatible vehicles.
4
LOCK / ARM: Press and release the “LOCK” button.
THE VEHICLE DOORS WILL LOCK AND THE STATUS LIGHTS WILL
FLASH RED.
UPON RECEIVING CONFIRMATION FROM YOUR SYSTEM, THE CON-
TROLLER WILL SHOW THE LOCK/ARM ICON AND BEEP ONCE
NOTE: PRESSING LOCK TWICE IN 5 SECONDS STARTS THE PARKING
TIMER. THE CLOCK WILL CHANGE TO 0:00 AND START COUNTING IN
MINUTES & HOURS.
(1-WAY TRANSMITTER: PRESS THE LOCK BUTTON)
Controller & Transmitter Functions
UNLOCK / DISARM: Press and release the “UNLOCK” button.
UNLOCK ALL OTHER DOORS.
UPON RECEIVING CONFIRMATION FROM YOUR SYSTEM, THE CON-
TROLLER WILL SHOW THE UNLOCK/DISARM ICON AND BEEP TWICE.
(1-WAY TRANSMITTER: PRESS THE UNLOCK BUTTON)
5
TRUNK RELEASE: Press & hold the “TRUNK” button for 3 seconds.
THE SYSTEM WILL DISARM AND THE TRUNK WILL OPEN (IF
EQUIPPED).
UPON RECEIVING CONFIRMATION FROM YOUR SYSTEM, THE
CONTROLLER WILL PLAY THE TRUNK RELEASE ANIMATION AND BEEP
TWICE
(1-WAY TRANSMITTER: PRESS AND HOLD THE “||” BUTTON FOR 3
SECONDS)
Controller & Transmitter Functions (cont’d)
REMOTE START: Press and release the “ ” button twice within 5 seconds.
(see programmable feature #5 for additional options)
SLOW GREEN.
UPON RECEIVING CONFIRMATION FROM YOUR SYSTEM, THE CONTROLLER
WILL PLAY THE REMOTE MELODY AND THE CLOCK WILL CHANGE TO 0:00 TO
START THE REMOTE START TIMER. IT WILL TIME HOW LONG THE ENGINE RUNS
IN MINUTES & HOURS.
(1-WAY TRANSMITTER: PRESS THE “|||” BUTTON TWICE IN 5 SECONDS)
Each time you park, set the climate controls to give you the desired
interior temperature when you use the remote start.
x2
*
6
Controller & Transmitter Functions (cont’d)
PANIC: Press & hold the “LOCK” or “UNLOCK” button for 3 seconds.
THE HORN WILL SOUND AND THE DOORS WILL LOCK OR UNLOCK
DEPENDING WHICH BUTTON IS PRESSED.
NOTE: PaNic may NOT bE availablE ON all vEhiclEs
PRESS LOCK OR UNLOCK AGAIN TO CANCEL PANIC MODE
(1-WAY TRANSMITTER: PRESS AND HOLD THE LOCK OR UNLOCK BUT-
TON FOR 3 SECONDS)
OR
LOW VOLTAGE/TEMP AUTO START: Press and release the “ ” button within 5
seconds of locking/arming the system.
THE SYSTEM WILL GIVE ONE CHIRP TO INDICATE THE LOW VOLT/
LOW TEMP(15 DEGREE) AUTO-START IS ACTIVATED. SEE PAGE 8 FOR
MORE INFO.
UPON RECEIVING CONFIRMATION, THE CONTROLLER WILL CHIRP
ONCE AND THE CLOCK WILL READ “RS AUTO” EVERY 5 SECONDS.
(1-WAY TRANSMITTER: PRESS AND RELEASE THE “START” BUTTON
WITHIN 5 SECONDS OF ARMING THE SYSTEM)
2
1
*
7
Controller & Transmitter Functions (cont’d)
AUXILIARY FUNCTIONS 1-4:
The actual operation of these functions will vary from car to car. They are designed to operate extra
vehicle functions like automatic sliding doors or motorized hatches. Aux 1-4 are virtual outputs only
operation with the controller and write each function in the blank spaces provided below.
- Auxiliary 1 Function (___________________): To activate this function, press and release the
“trunk” and “start” buttons simultaneously for 1 second).
- Auxiliary 2 Function (___________________): To activate this function, press and release the
“lock” and “trunk” buttons simultaneously for 1 second).
- Auxiliary 3 Function (___________________): To activate this function, press and release the
“unlock” and “start” buttons simultaneously for 1 second).
- Auxiliary 4 Function (___________________): To activate this function, press and release
the “unlock” and “trunk” buttons simultaneously for 1 second).
8
LOW BATTERY/LOW TEMP AUTOMATIC STARTING
Other Remote Start Features
This feature will automatically start the engine if the vehicle battery drops below 11 volts or the
interior temperature drop to 15 degrees fahrenheit. You must activate these features each time you
park your car to use them. They can be activated one of two ways:
Method 1 - Valet Switch
switch twice. If there is a 2 second delay without additional valet button presses, the antenna will
beep 2 times activating low voltage start mode.
-
na beeps twice, press the valet switch 1 time (15 degrees) or 2 times (32 degrees) within 5 seconds.
Method 2 - With The Controller
-
tenna and the clock on the 2-way controller will read between “RS AUTO” once every 5 seconds.
NOTE: When low temp start mode is activated, low voltage start is also activated. These features will
operate once every two hours until the ignition key is turned “ON”.
PIT-STOP FEATURE
This feature allows you to leave your engine running for making quick errands. To use this feature,
have the engine running normally from the ignition switch and your foot off the brake pedal. Press the
Valet Switch twice; the antenna will beep 5 times. Turn the key off and the engine will remain running
for the programmed run time. You can lock your vehicle with the controller to keep it secure while
away.
9
LAST DOOR LOCKING/ARMING
programmable feature #2). When all of the doors are closed after driving the vehicle, it will start a 30
opened, the countdown will pause until all entry points are closed again. Turning ON the ignition key
will cancel the last door arming sequence until the key is turned off and the doors are all closed once
again.
Security System Features
AUTOMATIC RE-LOCKING
This automatically re-locks the doors if the system is disarmed from the remote. (see program-
mable feature #3). When unlocked by remote, the system will start a 90 second countdown (fast
-
HANCED AUTO RE-LOCK allows you to cancel the countdown by pressing UNLOCK a second time
within 5 seconds.
2-WAY TRIGGER ALERTS
When the system is locked/armed, it will monitor the vehicles entry points (if the vehicle supports
this feature). If the door, trunk, or hood are opened, it will alert you on the 2-way controller and show
the icon of the violated zone.
10
Using The Valet Switch
EMERGENCY OVERRIDE
the system. To do so, use the following steps:
STEP 1 - Enter the vehicle (the alarm may sound)
STEP 2 - Turn the ignition key to the “ON” position
STEP 3 - Press the valet switch (located in the window-mount antenna) once
STEP 4 - Turn the ignition “OFF”.
The valet switch is a push button built into the window mount antenna. It is used to perform emer-
gency override and system programming (see inside of back cover for programming).
The Status Light
status via GREEN (remote start status) and RED (alarm status) lights.
SECURITY SYSTEM STATUS (RED LIGHT):
OFF: The system is unlocked and not performing any automatic functions.
FLASHING SLOW: The system is locked and monitoring all entry points.
FLASHING FAST: One of the automatic arming features is in progress.
AUTOMATIC TRANSMITTER VERIFICATION (RED LIGHT):
-
ber of controllers/transmitters programmed to the system. This unique security feature protects you
from a potential thief (valet attendant, mechanic, installer, etc.) adding their own transmitter without
Otros manuales para RF-50-EDP
2
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Excalibur
