eWON FLB 3271 Manual de usuario
support.ewon.biz
eWON Flexy
WiFi Extension Card
FLB 3271
This installation guide explains how to install the
eWON Flexy WiFi Extension Card FLB 3271
nstallation Guide
IG 020 / Rev 1 4
Table of Contents
1. Product Summary ............................................................................................................. 3
2. Safety, Environmental & Regulatory nformation ........................................................... 4
2 1 Scope 4
2 2 ESD Damage Prevention 4
2 2 1 Applicable Directives, Standards and Compliance 4
2 2 2 Applicable European Directives 4
2 2 3 Applicable Safety Standards 5
2 2 4 FCC Compliance 5
2 2 5 Certifications 5
2 3 Official Modem Identification 5
3. Hardware Description ...................................................................................................... 6
3 1 Mechanical Layout and Interfaces 6
3 2 Extension Card Label 7
3 2 1 Label Location and Information Included 7
3 2 2 Part Number Structure for Extension Cards 8
3 3 Front Panel LEDs 8
3 4 Specifications of the Wifi Extension Card 9
3 5 eWON Flexy Extension Cards Environmental Conditions 10
3 6 Plugging the Extension Card into the Base Unit 10
3 6 1 eWON Firmware compatibility 10
3 6 2 Base Unit Slot Compatibility 10
3 6 3 Extension Card Insertion 11
3 6 4 Multiple Wifi Extension Cards 12
3 6 5 Power Requirements 13
4. Powering On the Base Unit with its Extension Cards .................................................... 14
5. Check Card Detection on the Embedded Web Page ................................................ 15
5 1 Connecting to the Embedded Web Server 15
5 2 Detected Cards displayed in the System Page 15
6. eWON Configuration to work with a Wifi-card ............................................................. 16
6 1 Wifi Network Selection 16
6 2 Internet Interface Selection 17
6 3 WiFi Connection 17
Revision .............................................................................................................................. 19
Revision History 19
Page 2 / 19 eWON Flexy WiFi Extension Card FLB 3271 | IG 020
Chapter 1
Product Summary
1. Product Summary
This Installation Guide describes the hardware of the Wifi Extension Card FLB 3271 of the
eWON Flexy family
The eWON Flexy family is a range of modular industrial gateway/routers
As the name eWON Flexy suggests, it has been designed to enable numerous different
combinations of Extension Cards and Base Units This Installation Guide focuses on an
extension card which needs to be inserted in one of the Base Units in order to work The Base
Units have their own Installation Guide IG-014-0-EN “eWON Flexy - Base Units” This guide
addresses how the relevant Extension Card integrates with the Base Units and we give some
recommendations for its proper installation (see § 3 6 Plugging the Extension Card into the
Base Unit)
Page 3 / 19 eWON Flexy WiFi Extension Card FLB 3271 | IG 020
Chapter 2
Safety, Environmental & Regulatory Information
2. Safety, Environmental & Regulatory nformation
2.1. Scope
This section addresses Safety, Environmental & Regulatory Information for the Wifi Extension
Card FLB 3271 This Extension Card belongs to the same compliance frame as the Base Units
In the case of a telecommunication Extension Card, additional directives, standards and instructions
apply.
2.2. ESD Damage Prevention
- mportant -
Contains parts and assemblies susceptible to damage by electrostatic discharge (ESD). Always
use ESD precautions when handling Extension Cards and the opened Base Unit.
The Extension Card is a module exposing both sides of an electronic printed circuit board
Therefore, it is packed in antistatic ESD bags In order to avoid ESD damage, the product
must be handled with the necessary precaution including:
•Grounded ESD protective work surface
•Personnel grounding
2.2.1. Applicable Directives, Standards and Compliance
The Extension Card complies with the R&TTE directive 1999/05/EC and the FCC regulations
related to the wireless modems
The Extension Card belongs to class A Information Technology Equipment (ITE) In a
domestic environment this product may cause radio interference in which case the user
may be required to take appropriate measures
2.2.2. Applicable European Directives
The Extension Card is in conformity with the following EC directives:
•RoHS Directive 2011/65/EU
•EMC Directive 2004/108/EC
•R&TTE Directive 1999/5/EC
The product conforms to the corresponding R&TTE articles: RF spectrum efficiency (Art
3 2); EMC (Art 3 1b); Safety (Art 3 1a)
Page 4 / 19 eWON Flexy WiFi Extension Card FLB 3271 | IG 020
Chapter 2
Safety, Environmental & Regulatory Information
2.2.3. Applicable Safety Standards
The Extension Card is in conformity with the following safety standards:
•IEC/EN 60950-1
•UL 60950-1
•CSA-C22 2 No 60950-1-07
2.2.4. FCC Compliance
The Extension Card complies with Part 15 of the FCC Rules Operating is subject to the
following two conditions:
•This device may not cause harmful interference, and
•This device must accept any interference received, including interference that may
cause undesired operation
2.2.5. Certifications
The Extension Card has been certified by authorized bodies:
•Certificate Of Compliance (COC) # E350576
•CB certificate # DK-29479-A1-UL
These certificates can be downloaded as PDF files on the eWON Support web site:
http://support ewon biz/flexy
2.3. Official Modem dentification
This product contains part identified as follows by national authorities:
•FCC ID: QOQWF111
•IC ID: 5123A-BGTWF111
•RRA ID: KCC-CRM-BGT-WF111
•GITEKI (MIC) ID: 209-J00061
Page 5 / 19 eWON Flexy WiFi Extension Card FLB 3271 | IG 020
Chapter 3
Hardware Description
3. Hardware Description
3.1. Mechanical Layout and nterfaces
SMA-F Male antenna connector
Backplane connector
Page 6 / 19 eWON Flexy WiFi Extension Card FLB 3271 | IG 020
Chapter 3
Hardware Description
3.2. Extension Card Label
3.2.1. Label Location and nformation ncluded
The identification label of the extension cards is placed on the solder side of the PCB
The different parts of the label are described below:
PN
Part Number:
identifies the type of the card
Description see 3 2 2 Part Number
Structure for Extension Cards
SN
Serial Number
Structure of the Serial Number
1111-2233-0001-44
1111 = MTID (product related)
2233 = Year Week
0001 = sequential mfg order
44 = product type
MAC MAC Address of the Wifi Card
M N. FW.: Minimum firmware required on the
eWON
Marks CE, UL, certificate number and logos
if applicable
0682 Notified Body Number warrantor of the
CE Mark validation
Page 7 / 19 eWON Flexy WiFi Extension Card FLB 3271 | IG 020
Chapter 3
Hardware Description
3.2.2. Part Number Structure for Extension Cards
FLB3271_00/S
FL FL is the prefix for the extensions of
the eWON Flexy family Only FL (constant)
B
1 alphabetic sign (CAP)
Defines the slots of the base module
in which the extension can be
inserted See also § 3 6 2 Base Unit
Slot Compatibility
A 2 first slots only ●●○○
B 2 last slots only ○○●●
X In any slot ●●●●
3271_00 Wifi Extension Card The suffix _00 is used for software options
/S
The suffix might have an optional “/” character
It might also be blank or include “S” character => Indicates compliance
with the UL/IEC/EN 60950 standard
3.3. Front Panel LEDs
Item Mark Function Picture
STAT Green ON =
Interface is online
▄
Reception Signal level
Yellow ON = level > -80 dBm
Poor signal
█
Reception Signal level
Yellow ON = level > -70 dBm
Signal is OK
▄
█
Reception Signal level
Yellow ON = level >-50 dBm
Good signal
Page 8 / 19 eWON Flexy WiFi Extension Card FLB 3271 | IG 020
Chapter 3
Hardware Description
- Note -
f all signal level LED's are off, it may mean either that:
the W F interface is not activated in the eWON configuration
there is no signal at all (level 0)
there is a reception error (level XX)
3.4. Specifications of the Wifi Extension Card
Item Value(s)
Protocols and Frequencies IEEE802 11b/g/n, 2 4-2 5GHz
Antenna Connector Type SMA-F Male (SMA reverse polarity)
Antenna
(included in the delivery
Charact. Value(s)
Impedance 50 Ohms
Input Power > 17 dBm, IEEE 802 11b
> 15 dBm, IEEE 802 11g/n
Tightening
Torque
0 5 Nm In the absence of a torque wrench, a
soft manual tightening is sufficient
Device conformity has been tested with the reference antenna: Pulse W1030
Absolute maximum antenna gain as per FCC's rules and regulations, 47CFR:
•Part 15C : 2 14dBi
- mportant -
This device is to be used only in fixed applications. The antenna used for this transmitter has to
be installed to provide a distance of at least 20 cm from any person and may not be co-
located or operating in conjunction with any other antenna or transmitter.
Page 9 / 19 eWON Flexy WiFi Extension Card FLB 3271 | IG 020
Chapter 3
Hardware Description
3.5. eWON Flexy Extension Cards Environmental Conditions
Characteristic Value
Operating temperature -25 to +70 °C
Storage temperature -40 to +70 °C
Relative humidity 10 to 95% non-condensing
Operating altitude Up to maximum 2000m
Storage altitude Up to maximum 3000m
3.6. Plugging the Extension Card into the Base Unit
3.6.1. eWON Firmware compatibility
Before inserting the Extension Card into the Base Unit, verify if your eWON Flexy is running the
required firmware supporting the new extension card The required firmware version is
indicated on the label of the extension card For example: Min FW : 8 0 ( see § 3 2 1 Label
Location and Information Included)
3.6. . Base Unit Slot Compatibility
The Wifi Extension Card (FLB 3271) must be inserted in one of the “B” slots of the Base Unit
Explanation:
The Flexy Base Units feature two types of slot The A slots are the two first slots starting from
the left The B slots are the two last slots Some cards fit in A and B slots Some do not Cards
that fit only one type of slot have a mechanical mistake-proof security
Page 10 / 19 eWON Flexy WiFi Extension Card FLB 3271 | IG 020
Tabla de contenidos
Otros manuales de Enrutador de red de eWON
eWON
eWON 2005CD Manual de usuario
eWON
eWON 4005CD Manual de usuario
eWON
eWON COSY 141 Manual de usuario
eWON
eWON Cosy 131 Cellular 3G+ Manual de usuario
eWON
eWON 2101CD Manual de usuario
eWON
eWON 1000 Manual de usuario
eWON
eWON eWON Flexy Manual de usuario
eWON
eWON Cosy 131 Cellular 3G+ Manual de usuario
eWON
eWON Cosy 131 Cellular 3G+ Manual de usuario
Manuales populares de Enrutador de red de otras marcas
NETGEAR
NETGEAR FS526T - Switch Manual de usuario
Korenix
Korenix JetNet 5710G Series Manual de usuario
Automated Logic
Automated Logic ZN551 Manual del propietario
Cisco
Cisco ASR 1000 Series Manual del operador
EnGenius
EnGenius ESR-9710 Manual de usuario
Cisco
Cisco 805 Series Instrucciones de funcionamiento y seguridad