Evolis KC MAX Manual de usuario
1
KC MAX
USER GUIDE
Evolis © 2021. All rights reserved.
User-Guide_KSKC4_ENG_20210702
KC MAX
2
TABLE OF CONTENTS
Copyright 3
Trademarks 3
Warranty 3
Environmental Information 3
Recycling End-of-life Products 3
About Your New Printer 4
Icons in the document 5
1 – Getting Started 6
Description of the Printer Functions 6
Description of the Printer Functions 8
Connecting the printer 9
Ribbons 10
Fitting the ribbon 10
Cards 11
Storing new cards 11
Inserting the cards 11
Removing printed cards 14
2 - Servicing 15
General Warranty Information 15
Printer Cleaning 16
Printer servicing 16
Servicing the Print Head 20
Maintenance of the dust filter 21
Appendix A 22
Declarations of Conformity KC MAX 22
KC MAX
3
COPYRIGHT
Evolis © 2021 All rights reserved.
Users must observe the copyright regulations applicable in their country. This manual must not be photocopied, translated, reproduced,
ortransmitted, in whole or in part, for any reason and by any electronic or mechanical means whatsoever without the express written
consentofEvolis.
All the information contained in this document is subject to change without prior notice.
Evolis cannot be held liable for any errors that may be found in this manual, or for any loss or damage arising accidentally or as a result
ofdissemination or use of this manual.
TRADEMARKS
Evolis Premium Suite®and Evolis High Trust®are trademarks of Evolis. All other trademarks belong to their respective holders.
WARRANTY
Please refer to the warranty notice for the terms and conditions and limitations. It is available on www.evolis.com>Drivers&Support>Manuals
and Documents.
Warranty limit is available on www.evolis.com>Products & Services>Card Printers>Printer>Specifications.
Please register online at www.evolis.com to receive our special offers and general information.
Once on the website, click Drivers and Support then Register your printer and fill out all the fields, specifying in particular the model
andserialnumber of your equipment found on your printer.
ENVIRONMENTAL INFORMATION
Evolis is committed to helping the environment by reducing the energy consumption of its products.
RECYCLING END-OF-LIFE PRODUCTS
Manufacturing the equipment that you have purchased required the extraction and use of natural resources. This equipment may contain
materials that are hazardous to health and the environment.
To prevent the dispersal of such materials into our environment and to reduce pressure on our natural resources, we recommend that you use
existing collection facilities. These systems will re-use or recycle most of the materials in your end-of-life equipment in an appropriate way.
For further information on collection, re-use, or recycling systems, please contact your local or regional waste management organization.
Please do not hesitate to contact us to find out more by visiting our website at www.evolis.com or by emailing the following address: inf[email protected]om.
KC MAX
4
ABOUT YOUR NEW PRINTER
Using your new Evolis printer, you can create a wide variety of high-quality cards and personalized badges that can be printed and laminated
invarious thicknesses, colors, and styles. This printer uses consumables and accessories available from Evolis.
Certifications and declarations of conformity:
CE, UKCA, ICES, VCCI, BIS, CCC, KC, EAC, RoHS
FCC (Evolis contact: Evolis, Rising Sun Mills, 188 Valley St., Suite 421, RI 02909 Providence, evolisnortham@evolis.com)
Icons on the printer
Evaluation for apparatus only based on altitude not exceeding 2000m, therefore it’s the only operating condition applied for the
equipment. There may be some potential safety hazard if the equipment is used at altitude above 2000m.
As evaluation for apparatus is only based on temperate climate condition, it’s the only operating condition applied for the equipment.
There may be some potential safety hazard if the equipment is used in tropical climate region.
Reminder to use existing collection facilities.
Dimensions
• Printer (HxWxD): 314 x 417x 540,5 mm
• Feet height: 18 mm
Weight
21 kg
Connectivity
USB (1.0, 1.1, 2.0, 3.0), Ethernet, Serial (option), Wi-Fi
Environmental conditions
• Standard operating temperature: 15°C / 30 °C (59° / 86 °F)
• Humidity: 20% to 65% non-condensing
• Min / Max operating temperature and humidity rate: 0° / 40° C (32° / 104° F) and 20% to 65% non-condensing
• Min/max storage temperature: –5°C / +70 °C (23° / 158 °F)
• Storage humidity:
• Operating ventilation: free air
Electrical information
• Power supply unit: 100-240 Volts AC, 50-60 Hz, 1.7A
• Printer: 24 Volts DC, 2.71 A
To view all technical specifications, please refer to www.evolis.com>Products & Services>Card Printers>Printer>Specifications.
KC MAX
5
Further details about certain points in the main text.
Failing to take the recommended action is likely to damage your printer.
NOTE
!
ICONS IN THE DOCUMENT
The following icons are used in this manual to highlight information:
A video showing the procedure is available on www.evolis.com website.
KC MAX
6
1 – GETTING STARTED
DESCRIPTION OF THE PRINTER FUNCTIONS
A - Bezel for card exit
B - Power cable socket
C - Control Panel
D - Feeders (100 cards each)
E - Ethernet port
F - USB port
EF
C
A
B
D
KC MAX
7
H
G
G - Ejection Slot
H - Feeder Weights
KC MAX
8
I - Dust Filter
J - Thermal print head
K - Serial number label
L - Cleaning Roller
L
DESCRIPTION OF THE PRINTER FUNCTIONS
K
J
I
KC MAX
9
Connecting the printer
!
The printer must be connected to a properly protected and grounded electrical system.
FI: Laite on liitettävä suojamaadoitus koskettimilla varustettuun pistorasiaan.
NO: Apparatet må tilkoples jordet stikkontakt.
SE: Apparaten skall anslutas till jordat uttag.
DK: Printeren skal tilsluttes til en korrekt beskyttet og jordforbundet el-installtion.
To do so:
• Connect the power cable to the power supply unit, then plug the power cable jack into the printer.
• Next, connect the power cable plug to a grounded power socket outside of the terminal.
• The printer is powered on: the control panel lights up indicating that the printer is working properly.
If the control panel does not light up, then either the installation has not been carried out correctly or the printer
is not working properly. Please check the installation.
KC MAX
10
The printer automatically recognizes the ribbon inserted.
Insert the ribbon as shown.
Ribbons
Evolis original High Trust®ribbons optimize the operation of your printer and avoid causing damage to it. The use of third-party ribbons
maydamage your printer and will void the manufacturer's warranty for the printer.
For optimum print quality, Evolis recommends that the printer is fully cleaned every time the ribbon is changed. See the Servicing chapter
ofthismanual.
Fitting the ribbon
Open the cover. Close the cover and press until
youheara click.
NOTE
Tabla de contenidos
Otros manuales de Impresora de Evolis
Evolis
Evolis The Tattoo Rewrite Manual de usuario
Evolis
Evolis KU10E Manual de usuario
Evolis
Evolis Dualys Manual de usuario
Evolis
Evolis PRIMACY 2 Manual de usuario
Evolis
Evolis BadgePass NXT5000 Manual de usuario
Evolis
Evolis A5405 Manual de usuario
Evolis
Evolis Primacy Manual de usuario
Evolis
Evolis Pebble Manual de usuario
Evolis
Evolis Dualys Manual de usuario
Evolis
Evolis AGILIA Manual de usuario
Evolis
Evolis Avansia Manual de usuario
Evolis
Evolis Tattoo Manual del operador
Evolis
Evolis Avansia Manual de usuario
Evolis
Evolis Pebble Manual de usuario
Evolis
Evolis Zenius Manual de usuario
Evolis
Evolis Pebble Manual del operador
Evolis
Evolis KC ESSENTIAL Manual de usuario
Evolis
Evolis EDIKIO FLEX Manual de usuario
Evolis
Evolis Elypso Manual de usuario
Evolis
Evolis Badgy Manual de usuario
