IMPORTANT SAFETY INSTRUCTIONS
This document contains important instructions and warnings that must be followed when
using the EVECUBE 2C charging station from EV Expert s.r.o.
WARNING
Read this document before using the charging station. Failure to follow some of the instructions or warnings
described in this document may result in fire, electric shock, serious injury, or death.
➢The charging station is only designed for charging electric vehicles that support the IEC 62196-1 and
IEC 61851-1 standards. Do not use it for other purposes or with other vehicles or objects.
➢The charging station is only intended for vehicles that do not require ventilation during charging.
➢Do not use the charging station in combination with sockets that are not rated for the required current
load.
➢Do not use the charging station if it is defective or damaged, or if the LED indicates an internal error.
➢The device may only be opened for connection or disconnection from the mains.
➢A product that is exposed to direct sunlight may overheat and, as a result, may reduce or stop charging
until the internal components have cooled to operating temperature. Do not use the charging station in
very heavy rain.
➢Both the station body and the connecting cable can increase the temperature during the charging
process due to the passage of electric current, especially if they are exposed to direct sunlight or high
ambient temperatures. Watch out for burns.
➢Do not touch the end terminals with sharp metal objects such as wires, needles or other tools.
➢Make sure that the charging cable does not obstruct the movement of pedestrians, other vehicles or
other entities.
Installation may only be performed by persons with appropriate qualifications in the field of electrical
engineering. Contact your dealer to install or service the station.
If a fault occurs, the user is not authorized to open, disassemble, repair or otherwise modify the device.
If repair is required, contact EV Expert s.r.o. or your dealer.
