EverFocus VANGUARD II 16x8H Manual de usuario
VANGUARD II 16x8H
16CH / H.265 / Hybrid DVR
Quick Installation Guide
Copyright © EverFocus Electronics Corp.
Release Date: April 2022
All the images including product pictures or screen shots in this document are for example only. The images may
vary depending on the product and software version. Information contained in this document is subject to
change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw marketing@everfocus.com.tw
1
1. Overview
1.1 Front Panel
PWR HDD
2
13
No.
Name
Description
1
IR Receiver
Receiver for signals from the IR remote control.
2
LED Indicator
Power: When power is on, the LED will continue lighting in green.
HDD: When power is on, the LED will continue lighting in red. When
HDD is reading/writing data, the LED will flashes red.
3
USB2.0 Port
USB2.0 port for connecting to a mouse or an external storage device.
1.2 Rear Panel
1 2 4
3 5
6 7 8
910 11 12 13
No.
Name
Description
1
e-SATA Port
Connects to external HDD.
2
Audio Input
Connects to audio input devices, such as microphones. Note that the
microphones with a (built-in) amplifier and external power supply are
required.
3
Audio Input
(5-16)
Connect the supplied D-Sub Cable Harness to this port for audio input
(CH5-16) connection. Note the microphones with a (built-in) amplifier
and external power supplies are required.
4
CVBS
CVBS video output connection.
5
Audio Output
Connects to an audio output device, such as speakers. Note that the
speakers with a (built-in) amplifier and external power supply are
required.
6
Video Input
Connects the AHD/TVI/SD cameras to the Video Input.
2
7
VGA Port
Connects to a monitor using a VGA cable.
8
Terminal
Block
The Terminal Block provides alarm inputs, alarm output and RS-485
connection (see 3.1 Terminal Block).
9
HDMI Port
Connects to a monitor using a HDMI cable.
10
LAN
Connects to the Network.
11
USB2.0 Port
The USB2.0 port for connecting to a mouse or external storage device.
12
Power Port
Connects to a 12VDC power source.
13
Power Switch
Press to turn on or off the power.
1.3 Packing List
DVR x 1
Power Cord + Adaptor x 1
Mouse x 1
HDD Screw x 8
Quick Installation Guide x 1
IR Remote Control (with 2 AAA batteries) x 1 (see Note 3)
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your
local EverFocus office or agents for more information. Please also keep the shipping carton
for possible future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.
3. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
a. Use only two AAA dry cell batteries.
b. Do not dispose of the batteries in a fire as it may explode.
1.4 Dimensions
3
2. Basic Installation
2.1 Hard Disk Installation
You can install two 3.5”HDDs inside the DVR for recording videos. The maximum capacity of
each HDD is 8TB.
1. Make sure the DVR is power-off.
2. Unscrew the eight housing screws (4 on the rear panel, 2 on the left and right side each). To
remove the housing cover from the DVR, push the cover backward and then lift it.
3. Find the SATA cable and power cable inside the DVR, connect the SATA cable to the SATA
port on the HDD (left image) and then connect the power cable to the HDD (right image).
4. Place the HDDs inside the DVR, screw the HDDs from the bottom side of the DVR using the
supplied Screws.
5. Screw the housing cover back to the DVR.
4
2.2 Hard Disk Compatibility List
Please go to EverFocus’ Website www.everfocus.com.tw, and go to Support > Product Marketing
to search for and download the Storage Compatibility Table. It’s recommended to use the hard
disk models listed on the table to ensure your hard disks will be compatible.
Note: If using two or more hard disks, please choose the hard disks with the same capacity.
3. Basic Connection
The demonstration below shows the basic connections to the DVR.
Line Level
Audio Input
Line Level
Audio Out TVI/AHD/SD Camera
Main Monitor
(VGA)
Main Monitor
(HDMI)
Network
Web Remote Client
IP Cameras
VANGUARD CMS
Mouse / USB Storage
Power Supply
Main Monitor
(CVBS)
External
HDD
3.1 Terminal Block
Alarm Input: 16
Alarm Output: 1
RS-485: 1
5
4. Turning On / Off the Power
Before powering on the DVR, please make sure the internal HDD have been installed properly.
Once you have completed the basic cable connections, you are ready to turn on the DVR.
Simply plug in the power source and then press the Power Switch on the rear panel of the DVR.
The POWER LED will light up if power is normal and the DVR will enter the System Initialization
process.
When the process is done, it’s required to set up a password for the administrator account
immediately in order to protect your privacy.
To turn off the power, click the Shutdown button on the Exit page (OSD menu > Exit >
Shutdown) and then press the Power Switch on the rear panel of the DVR.
6
5. P2P Function
The P2P function allows users to add DVRs to EverFocus’ eFVMS App through QR code.
1. Install EverFocus eFVMS App. For Android users, go to Google Play Store. For iOS users, go to
Apple Store. After the installation process is complete, start eFVMS App.
EverFocus eFVMS eFVMS by EverFocus
2. To add a DVR through P2P, tap Menu > Device List, and then tap the “+” button on the
upper-right corner.
3. Scan the DVR’s QR code on the System Info page of the DVR OSD menu. Input the DVR ID,
password and Media Port 8000. Tap the Save button.
……
7
4. The DVR is now added and connected to the App. You can start accessing the DVR.
VANGUARD II 8x4H
VANGUARD II 8x4H –CH1 [P2P]
VANGUARD II 8x4H
6. IR Remote Control
Key1-8: Channel Select; Numeric Keys
Enter into Main Menu / Exit
Key9, 0: Numeric Keys
Enter into Submenu
Multiple Display Mode
Mute On / Off
1. Volume Increase / Decrease
2. Up / Down
1. Parameter Value Increase / Decrease
2. Left / Right
Select / Edit
ForwardRewind
Pause / Sequence
Record 1. Stop Manual Record
2. Stop Playback
1. Enter into Record Search Menu
2. Start Playback
P/N: 4605VAN1602006A
Tabla de contenidos
Otros manuales de DVR de EverFocus
EverFocus
EverFocus EMV400 FHD Manual de usuario
EverFocus
EverFocus eNVP-JNN-IV-V0008 Manual de usuario
EverFocus
EverFocus PARAGON Series Manual de usuario
EverFocus
EverFocus EDSR-900 Manual de usuario
EverFocus
EverFocus ECOR 4 Manual de usuario
EverFocus
EverFocus EDR410H Manual de usuario
EverFocus
EverFocus Nevio ENVS1600 Manual de usuario
EverFocus
EverFocus PARAGON264x1 Manual de usuario
EverFocus
EverFocus EPHD04+ HDcctv Manual de usuario
EverFocus
EverFocus EPHD08 Manual de usuario
EverFocus
EverFocus VANGUARD 4x2H Manual de usuario
EverFocus
EverFocus EDR410H Manual de usuario
EverFocus
EverFocus EMV401 Manual de usuario
EverFocus
EverFocus DHV-410M Manual de instrucciones
EverFocus
EverFocus ENDEAVOR 264X4 Manual de usuario
EverFocus
EverFocus Paragon264 X4 32CH Manual de usuario
EverFocus
EverFocus Paragon960 Manual de usuario
EverFocus
EverFocus EMV1200 HD Manual de usuario
EverFocus
EverFocus EDVR SERIES Guía de instalación
EverFocus
EverFocus Paragon264 Series Manual de usuario
