EverFocus EMV400S FHD Manual de usuario

EMV400S FHD / EMV400SSD

4 Channels 1080p Full HD Mobile DVR

Quick Installation Guide

EMV400S FHD

EMV400SSD

Release Date: March, 2017

All the images including product pictures or screen shots in this document are for example only.

The images may vary depending on the product and software version. Information contained in

this document is subject to change without notice.

EMV400S FHD / EMV400SSD Mobile DVR

1. Introduction

The latest EverFocus H.264 full HD mobile DVR comes in two models: EMV400S FHD and

EMV400SSD, delivering 1080p full HD resolution on live/recording streams.

Its comprehensive features along with the 3G, 4G and Wi-Fi function, enables its mobility and

functionality to be widely adopted in the vehicle environment. The models provide an external

I/O port for connecting to I/O devices such as CAN bus. Moreover, the User Interface has been

specially designed to fit the mobile small-sized monitor. Both of the models are CE and FCC

certified.

You can use EverFocus Mobile Applications, MobileFocus, to remotely view the camera streams

from the mobile DVR through your handheld devices; or use EverFocus Xfleet system for remote

fleet management. Other than that, users can also use EverFocus EF-Reader to remotely back

up recordings from the SSD/SD card of the mobile DVRs. The full HD mobile DVR is the ideal

solution for your mobile surveillance needs.

EMV400 Series Models

Spec EMV400S FHD EMV400SSD

Channels 4CH 4CH

Alarm I/O External I/O port External I/O port

SD Card Slot 1 (max. 128GB) 1 (max. 128GB)

SSD Storage - 1 (up to 4TB)

WiFi/GPS Supported (Optional) Supported (Optional)

3G/4G Supported (Optional) Supported (Optional)

Certificates CE, FCC CE, FCC

Storage Functionality

Spec EMV400S FHD EMV400SSD

SD Card For general recordings For alarm event backup recordings

SSD - For general recordings

External USB Storage For archiving (backup) recordings

For archiving (backup) recordings

EMV400S FHD / EMV400SSD Mobile DVR

Packing List

•

Mobile DVR x 1 •

D-Sub Cable x 1 (see 2.3.4 D-Sub Cable)

•VGA Cable x 1 •Quick Installation Guide x 1

•Card Lock Key x 2 (for EMV400S FHD only) •CD x 1 (Please see Note 3.)

•

SSD Lock Key x 2 (for EMV400SSD only) •

Mounting Kit x 1 (Screw x 4, Anchor x 4)

•Power Harness Cable x 1

(see 2.3.3 Power Harness Cable)

•IR Remote Control x 1

(with two AAA batteries. See Note 4)

Note:

1. Equipment configurations and supplied accessories vary by country. Please consult your

local EverFocus office or agents for more information. Please also keep the shipping

carton for possible future use.

2. Contact the shipper if any items appear to have been damaged in the shipping process.

3. The CD contains the IP Utility software, User Manual and Quick Installation Guide.

4. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries

according to the instructions.

•Use only two AAA dry cell batteries.

•Do not dispose of the batteries in a fire as it may explode.

Optional Accessories

You can use the optional accessories to expand the capabilities and versatility of the mobile DVR.

Please contact your dealer for more information.

•3G Antenna: For using 3G network function •4G Antenna: For using 4G LTE network (LTE

frequency bands differ among regions)

•GPS Receiver:For using GPS function •Wi-Fi Antenna: For using Wi-Fi function

•External I/O Box: For connecting to the

Alarm I/O and RS-232 devices (see 2.3.7

External I/O Box & LED Indicates Box)

•LED Indicates Box: For monitoring mobile

DVR status (note this device must work in

conjunction with External I/O Box) (see

2.3.7 External I/O Box & LED Indicates Box)

EMV400S FHD / EMV400SSD Mobile DVR

Front Panel

12356

EMV400S FHD

EMV400SSD

12356

No. Name Description

1 IR Receiver Receives data from the infrared remote control.

2 System LEDs

Power: Lights red continuously when power is supplied. Blinks when

power supply is insufficient.

Storage: Lights green continuously when storage is reading or writing

data.

Error: Lights yellow continuously when system error occurs, including

System Clock Error, Storage Failed, Storage Off and Network Loss.

3 Card Lock

Open the card protection lock and then insert a SDHC/SDXC card (up to

128GB, see 2.3.1 SD Card Installation); or insert a SIM card for 3G/4G

function (see 2.3.6 Antenna Connection). To see the SD card info, see

6.5.1 Storage in the User’s Manual. You can also see Tested Card Brands

in 2.3.1 SD Card Installation for tested card brands.

4 Reset Button Press and hold the Reset Button to restart system.

5 USB2.0 Port

Connects to a USB storage device or a mouse. You can use the USB

storage device for archiving (backup) recordings. Up to 4TB storage

capacity is supported of the USB storage device.

6 LAN Connects to a 10/100 Ethernet.

7 SSD Key Lock Lock and unlock the SSD tray (see 2.3.2 SSD Installation).

EMV400S FHD / EMV400SSD Mobile DVR

Rear Panel

12 3 4 5

EMV400S FHD

EMV400SSD

123 4 5

No. Name Description

1 DC Power Input Power harness cable for connecting to 8 ~ 35VDC power source. For

details, please refer to 2.3.3 Power Harness Cable.

2 Antenna

Connects the antenna to the mobile DVR. Please refer to 2.3.6

Antenna Connection for more details.

Ant. 1 (3G/4G) Connects to the 3G or 4G antenna.

Ant. 2 (4G)Connects to the 4G antenna. Note that the 4G function is

required to use both Antenna 1 and 2.

Ant. 3 (Wi-Fi) Connects to the Wi-Fi antenna for using Wi-Fi function.

3 D-Sub Port

A D-Sub connector for connecting to the audio and video devices, GPS

device and supply power for the connected cameras. Speakers and

microphones with a (built-in) amplifier and external power supply are

required. For details, please refer to 2.3.4 D-Sub Cable.

4 EXT Box Optionally connects to an external I/O box for alarm I/O function (see

2.3.7 External I/O Box & LED Indicates Box).

5 VGA Connects to a monitor using the supplied VGA Cable. You can display

live view or perform the playback and OSD operations.

EMV400S FHD / EMV400SSD Mobile DVR

2. Getting Started

2.1 Installation

Before installation, choose a location in the vehicle where it can:

•Provide convenient access for installing or removing the hard disk

•Allow air to flow around the fan vents. Inadequate or improper air flow can impede proper

operation of the mobile DVR

Please avoid installing the mobile DVR to the following locations in the vehicle:

•That is subject to high vibration / sunlight levels

•That is subject to be drenched of the rain

•Where passengers can interfere with the mobile DVR

•Next to a heater duct

The following table lists the recommended location options in the vehicle:

Location Convenient

Operation

Easy to

Install

Low

Vibration

Good

Air Flow

Bottom of glove box- horizontal mount

Yes Yes Yes Yes

Bottom of passenger seat next to the driver

No Yes Yes Yes

Underneath bulkhead-horizontal mount

Yes Yes No Yes

Front of bulkhead-horizontal mount Yes Yes Yes Yes

Beside deriver seat-horizontal mount

Yes Yes Yes Yes

Note: Do not install the mobile DVR on the floor or on the transmission access hatch. These

locations have the highest levels of vibration and may be subject to water damage.

EMV400S FHD / EMV400SSD Mobile DVR

2.1.1 Dimensions

2.1.2 Mounting

To mount the mobile DVR onto a surface inside a vehicle:

1. Optionally drill four holes on the mounting surface according to the hole-position on

the mobile DVR and then insert the four supplied Anchors into the holes on the

mounting surface. Place the mobile DVR on the mounting surface against the anchoring

surface so that the holes line up.

2. Screw the mobile DVR to the mounting surface using the supplied four Screws

3. The mounting process is now complete. You can start connecting cables and the desired

devices to the mobile DVR. Please refer to 2.3 Basic Connection for more details.

EMV400S FHD / EMV400SSD Mobile DVR

2.2 Vehicle Connection

The mobile DVR supports input power voltage between 8VDC ~ 35VDC. You can install the

mobile DVR in all kinds of vehicles support the above power voltage. The diagrams below are

examples to illustrate the connection inside a car / truck with 12VDC / 24VDC.

2.2.1 Connecting to a Truck with 24VDC

24V+ GND IGN

Red Black Yellow

24V+ (Red)

Vehicle Battery

Key Start /

Switch

IGN (Yellow)

Relay (24V)

Fuse (7.5A)

GND (Black)

24V

Glove box (inside or underneath)

Driver’s seat (between the seat and the back panel) or underneath the Passenger seat

Note:

1. If the car is without an ignition key, please connect the IGN (yellow) wire directly or

via a switch to the vehicle battery.

2. It is suggested to use a relay in the installation. Otherwise, the mobile DVR will always

draw the power from the vehicle battery.

EMV400S FHD / EMV400SSD Mobile DVR

2.2.2 Connecting to a Car with 12VDC

12V+ GND IGN

Red Black Yellow

12V+ (Red)

Vehicle Battery

Key Start /

Switch

IGN (Yellow)

Relay (12V)

Fuse (7.5A)

GND (Black)

12V

Note:

1. If the car is without an ignition key, please connect the IGN (yellow) wire directly or

via a switch to the vehicle battery.

2. It is suggested to use a relay in the installation. Otherwise, the mobile DVR will always

draw the power from the vehicle battery.

Trunk

Passenger seat (underneath)

Glove box (inside or underneath)

Driver seat (between the seat and side panel)

EMV400S FHD / EMV400SSD Mobile DVR

2.3 Basic Connection

After installing the mobile DVR in the vehicle, you can start connecting the external devices to

the mobile DVR. The instructions below describe the basic connection to the mobile DVRs. For

details on cable connections, please refer to the following sections. The example below is

using EMV400SSD.

Front View Rear View

Monitor

Speaker

Vehicle Power Supply

Power Harness Cable

Camera

D-Sub Cable

Microphone

WAN

CMS (Client PC)

NB / PC

SSD Storage

Mouse

2 65

1. To record videos, install a storage device to the mobile DVR:

For EMV400S FHD: Insert an SD Card to the SD Card Slot (see 2.3.1 SD Card

Installation).

For EMV400SSD: Install an SSD to the SSD tray (see 2.3.2 SSD Installation).

2. To control the system, connect a mouse to the mobile DVR or use the supplied IR Remote

Control.

3. To manage the mobile DVR over network, use a standard RJ-45 cable to connect the mobile

DVR to the network.

Note: The mobile DVRs feature Wi-Fi/3G/4G function. You can optionally connect the

Wi-Fi/3G/4G antenna to the mobile DVR for wireless networking (see 2.3.6 Antenna

Connection).

4. Connect the supplied Power Harness Cable to the power supply in the vehicle for powering

the mobile DVR (see 2.3.3 Power Harness Cable). For details on vehicle connection, please

refer to 2.2 Vehicle Connection.

5. Connect the eZ.HD cameras (HD-TVI / HD-CVI / HD-SDI cameras are not supported) to the

mobile DVR using the supplied D-Sub Cable (see 2.3.4 D-Sub Cable). You can also optionally

connect a speaker or microphone to the mobile DVR using the supplied D-Sub Cable. Note

that the speaker/microphone with a (built-in) amplifier and external power is required.

6. To view videos, connect a monitor to the VGA port using the supplied VGA cable. You can

also connect a call monitor to the BNC port, please refer to 2.3.5 Monitor Connection.

Otros manuales para EMV400S FHD

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de DVR de EverFocus

EverFocus

EverFocus EMV400S FHD Manual de usuario

EverFocus

EverFocus 410M Manual de usuario

EverFocus

EverFocus EPHD08 Manual de usuario

EverFocus

EverFocus ENVR8304E-8CH Manual de usuario

EverFocus

EverFocus NVR8008X Manual de usuario

EverFocus

EverFocus UNIGUARD 4 HDD Series Manual de usuario

EverFocus

EverFocus EMV400 FHD Manual de usuario

EverFocus

EverFocus ENR 400 Manual de usuario

EverFocus

EverFocus PowerPlex EDR1600 Manual de servicio

EverFocus

EverFocus EDSR100 Manual de usuario

EverFocus

EverFocus ECOR264-D2 DVR Series Manual de usuario

EverFocus

EverFocus ECOR Series Manual de usuario

EverFocus

EverFocus EDSR400H Manual de usuario

EverFocus

EverFocus PARAGON Series Manual de usuario

EverFocus

EverFocus EDR1620 Manual de usuario

EverFocus

EverFocus EDSR-900 Manual de usuario

EverFocus

EverFocus EMV400 Manual de usuario

EverFocus

EverFocus EDSR400H Manual de usuario

EverFocus

EverFocus DHV-410M Manual de instrucciones

EverFocus

EverFocus ERS-4 Manual de usuario

EverFocus

EverFocus EDR410H Manual de usuario

EverFocus

EverFocus ECOR960-16X1 Manual de usuario

EverFocus

EverFocus ECOR960 4F2 Manual de usuario

EverFocus

EverFocus ENVR8304D-8CH Manual del propietario

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

Swann

Swann NVR-7085 models Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario