EverFocus IRONGUARD II 16 POE Manual de usuario

IRONGUARD II 16 POE

16CH, H.265, 8MP NVR

Quick Installation Guide

Release Date: February 2023

All the images including product pictures or screen shots in this document are for example only. The

images may vary depending on the product and software version. Information contained in this

document is subject to change without notice.

EverFocus Taiwan:

2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan

TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw [email protected]

1. Overview

1.1 Fron t Panel

No.

Name

Description

1 IR Receiver Receiver for signals from the IR remote control.

2 LED Indicator

Power: When power is on, the LED will continue lighting in green.

HDD: When power is on, the LED will continue lighting in red. When

HDD is reading/writing data, the LED will flashes red.

3 USB2.0 Port USB2.0 port for connecting to a mouse or an external storage device.

1.2 Rear Panel

489

No.

Name

Description

1 Audio Input

Connects to audio input devices, such as microphones. Note that the

microphones with a (built-in) amplifier and external power supply are

required.

2 Terminal Block

The Terminal Block provides alarm inputs, alarm output

3 RS485

RS-485 connection

4 Audio Output

Connects to an audio output device, such as speakers. Note that the

speakers with a (built-in) amplifier and external power supply are

required.

5 VGA Port

Connects to a monitor using a VGA cable.

6 HDMI Port

Connects to a monitor using a HDMI cable.

7 USB 2.0 Port USB ports for connecting to a mouse or external storage device.

8 Video Input

LAN (PoE) ports for connecting to the IP cameras.

9 LAN

Connects to the Network.

10 Power Port

Connects to a 48VDC power source.

11 Power Switch

Press to turn on or off the power.

1.3 Packing List

•NVR x 1

•Power Cord x 1

•Mouse x 1

•HDD Screw x 8

•Quick Installation Guide x 1

Note:

1. Equipment configurations and supplied accessories vary by country. Please consult your

local EverFocus office or agents for more information. Please also keep the shipping carton

for possible future use.

2. Contact the shipper if any items appear to have been damaged in the shipping process.

1.4 Dimensions

Front View Side View

380mm / 14.96"

50mm / 1.97"

340mm / 13.39"

2. Basic Installation

2.1 Hard Disk Installation

You can install two 3.5” HDDs inside the NVR for recording videos. The maximum capacity of

each HDD is 8TB.

1. Make sure the NVR is power-off.

2. Unscrew the eight housing screws (4 on the rear panel, 2 on the left and right side each). To

remove the housing cover from the NVR, push the cover backward and then lift it.

3. Find the SATA cable inside the NVR, and connect the SATA cable to the SATA port on the HDD

(left image). Find the internal power cable, and connect the internal power cable to the HDD

(right image).

4. Place the HDDs inside the NVR, screw the HDDs from the bottom side of the NVR using the

supplied Screws.

5. Screw the housing cover back to the NVR.

2.2 Hard Disk Compatibility List

Please go to the product page (Download) on EverFocus’ Website www.everfocus.com.tw to see

the latest Storage Compatibility List. It’s recommended to use the hard disk models listed on the

Storage Compatibility List to ensure your hard disks are compatible.

Note: If using two hard disks, it’s recommended to choose the hard disks with the same

capacity.

3. Basic Connection

Line Level

Audio Input IP Cameras

Main Monitor

(VGA)

Main Monitor

(HDMI)

Mouse / USB Storage

3.5" HDD 2

344

Web Remote

Client

IP Cameras

Network

EverFocus CMS

Line Level

Audio Out

Power Supply

1. To record videos, install 3.5” HDD(s) to the NVR. Please refer to 2.1 Hard Disk Installation.

2. Connect microphones to the audio input ports to transmit audio from the NVR to the remote

sites (Web browser of NVR, eFVMS App or EverFocus CMS). Note that the microphones with

a (built-in) amplifier and external power supply are required.

3. To listen to the audio from IP cameras or remote sites, connect speakers to the audio output.

Note that the speakers with a (built-in) amplifier and external power supply are required.

4. To view videos at local site, connect a monitor to the HDMI or VGA port using the HDMI or

VGA cable supplied by the monitor manufacturer.

5. Optionally connect a mouse to the NVR to control the system. You can also control the

system using the supplied IR Remote Control.

6. To connect to the IP cameras, connect the cameras to the LAN (PoE) ports.

7. Use a standard RJ-45 CAT5 Ethernet cable to connect the NVR to the network.

8. Use the supplied Power Cord to connect the NVR to the power outlet.

4. Turning On / Off the Power

Before powering on the NVR, please make sure the internal HDD have been installed properly.

Once you have completed the basic cable connections, you are ready to turn on the NVR.

Simply plug in the power source and then press the Power Switch on. The POWER LED will light

up if power is normal and the NVR will enter the System Initialization process.

When the process is done, it’s required to set up a password for the administrator account

immediately in order to protect your privacy.

To turn off the power, click the Shutdown button on the Exit page (OSD menu > Exit >

Shutdown) and then press the Power Switch on the rear panel of the NVR.

Note: If you forget the password when login, you can try the following instructions:

•If you have pre-configured the email settings, you can just click “Forget Password” on the

email address.

•If you have never configured the email settings, please mail the MAC Address, Serial

Number and the Model Name to ts@everfocus.com.tw to get a temporary password.

5. P2P Function

The P2P function allows users to add NVRs to EverFocus’ eFVMS App through QR code.

1. Install EverFocus eFVMS App. For Android users, go to Google Play Store. For iOS users, go to

Apple Store. After the installation process is complete, start eFVMS App.

EverFocus eFVMS eFVMS by EverFocus

2. To add a NVR through P2P, tap Menu > Device List, and then tap the “+” button on the

upper-right corner.

3. Scan the NVR’s QR code on the System Info page of the NVR OSD menu. Input the NVR ID,

password and Media Port.Than tap the Save button.

……

4. The NVR is now added and connected to the App. You can start accessing the NVR.

IRONGUARD 16 POE

P/N:

Tabla de contenidos

Otros manuales de DVR de EverFocus

EverFocus

EverFocus EDVR16D1/250 Manual de usuario

EverFocus

EverFocus PARAGON960 X4 Manual de usuario

EverFocus

EverFocus Paragon 264X4 32CH Manual de usuario

EverFocus

EverFocus EDVR SERIES Manual de usuario

EverFocus

EverFocus PARAGON264x4--32CH Series Manual de usuario

EverFocus

EverFocus ECOR264-4F1 Manual de usuario

EverFocus

EverFocus PowerPlex EDR1600 Manual de servicio

EverFocus

EverFocus ECOR264-4D2 Manual de usuario

EverFocus

EverFocus ECOR 264x1-16 Manual de usuario

EverFocus

EverFocus EDVR16D3 Manual de usuario

EverFocus

EverFocus PARAGON Series Manual de usuario

EverFocus

EverFocus eZ.HD PARAGON FD 16x4 Manual de usuario

EverFocus

EverFocus EMV1200 FHD Manual de usuario

EverFocus

EverFocus Paragon EPARA16D3 Manual

EverFocus

EverFocus eZ.HD ELUX4 Manual de usuario

EverFocus

EverFocus DVR-100H Manual de usuario

EverFocus

EverFocus VANGUARD 16x8 Manual de usuario

EverFocus

EverFocus EDVR SERIES Guía de instalación

EverFocus

EverFocus ECOR264-D2 DVR Series Manual de usuario

EverFocus

EverFocus ECOR 4 Manual de usuario

EverFocus

EverFocus EMV400S FHD Manual de usuario

EverFocus

EverFocus eNVP-JNN-IV-V0008 Manual de usuario

EverFocus

EverFocus NDVR Manual de usuario

EverFocus

EverFocus PARAGON 264x1 Manual de usuario

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

Swann

Swann NVR-7085 models Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario