Page 4 of 22
www.ev-hub.com.au
2 Introduction
Thank you for choosing the EVBox Elvi.
This User manual tells you how to use and fault find any potential issues with the EVBox Elvi.
Carefully read the safety information before you start.
These instructions are valid for several models of the charging station. It is possible that some
features and options described may not apply to your charging station.
2.1 Get in touch
If you have any suggestions how we can improve our offer, or if you see an error, we’d love to hear
from you. You can contact us by going to https://ev-hub.com.au/
All EVBox manuals can be downloaded from evbox.com/manuals.
3 Safety precautions
3.1 Warning: Risk of electric shock
• Read the supplied documentation carefully to familiarize yourself with all safety instructions
and regulations before using this product.
• This product is designed and tested in accordance with international standards.
• The use of this product is limited to those applications it is designed for.
• Installation, maintenance and repairs of this product are only to be performed by qualified
personnel.
• Incorrect installation or repairs may cause hazardous situations for the user of this product.
• This product is used in combination with a power source.
• Always switch off power before any maintenance activity.
• This product contains no user-serviceable parts. Consult EV Hub or your distributor for more
information. Do not attempt to service or repair the charging station yourself!
• Make sure that the product is only used under the correct operating conditions.
• Cord extension sets are not allowed to be used.
• Make sure that the power line to the wall dock is installed on a dedicated circuit breaker
(MCB) on your service panel. The installation must incorporate an adequate residual-current
device (RCD) Type A. The MCB must be in line with the capacity of the EVBox Elvi charging
cable used (3.7, 7.4, 11, 22 kW). In case the amperage rating of the charging cable is
different than the amperage rating of the (MCB), the installer/user must change the station
settings in the mobile app for station management and/or backend portal account as
provided by the operator or service provider for this product.
The installing party must always ensure that the charging station is installed according to the
local regulations. The installation settings of the service panel must always be adjusted by a
qualified electrician.
EV Hub and EVBox is not responsible for any damage that occurs if this product is transported in
a different packaging than the packaging in which the product was originally supplied. Store this
product in a dry environment; the storage temperature must be between -25 °C and +60 °C.
