Eusso 200Mbps Powerline HomePlug Manual de usuario
200Mbps Powerline HomePlug
Ethernet Adapter
User Manual
Copyright 2008 EUSSO Technologies, Inc. All rights reserved.
About This Manual
The 200Mbps Powerline HomePlug Ethernet Adapter User Manual describes how to install,
configure, and troubleshoot the 200Mbps Powerline HomePlug Ethernet Adapter.
Chapter 1
Installing the 200Mbps Powerline HomePlug Ethernet Adapter
This chapter describes how to set up the 200Mbps Powerline HomePlug Ethernet Adapter
on your local area network (LAN) and connect to the Internet.
Package Contents
The product package should contain the following items:
zOne or Two 200Mbps Powerline HomePlug Ethernet Adapter
z200Mbps Powerline HomePlug Ethernet Adapter CD, including:
— This User Manual.
— Management Utility
If any of the parts are incorrect, missing, or damaged, contact your dealer. Keep the carton,
including the original packing materials, in case you need to return the 200Mbps Powerline
HomePlug Ethernet Adapter for repair.
Status Lights and Label Information
The 200Mbps Powerline HomePlug Ethernet Adapter has status indicators and a label with
important information. Familiarize yourself with these features of your product.
Front Panel Status Lights
The front panel of the 200Mbps Powerline HomePlug Ethernet Adapter contains status
lights. You can use them to verify connections. The table below describes the lights on the
front panel.
Status Lights on Front Panel Description
Power 9Off – Power Off
9Solid Blue – Power On
Powerline Link/ACT LED
9Off – No Link
9Solid Blue – Link
9Blinking Blue – Activity
Ethernet Link/ACT LED
9Off – No Link
9Solid Blue – Link
9Blinking Blue – Activity
How the PowerlineAdapter Fits in Your Network
You can use the 200Mbps Powerline HomePlug Ethernet Adapter to implement or extend
an Ethernet local area network (LAN) anywhere in your house using your existing electrical
power line in place of a dedicated LAN wiring infrastructure. An example is illustrated in the
following diagram:
Follow the instructions below to set up your Powerline adapter.
Prepare to Install Your Powerline Adapter
Check that these minimum requirements are met.
zYour Ethernet network is set up and an Ethernet port is available on your router.
zYour Internet connection is working.
zEach computer or device to be used on your network has an Ethernet port.
Connect a 200Mbps Powerline HomePlug Ethernet Adapter to the Router
First, connect a 200Mbps Powerline HomePlug Ethernet Adapter to a LAN port on the
router so that the Powerline network can access the Internet. Do not connect the Powerline
adapter to a power strip, extension cord, or surge protector as this may prevent it from
working properly or degrade the network performance.
a. Plug the Ethernet cable that came in the box into a LAN port on your router or switch in
your network.
b. Plug the Powerline adapter into an electrical outlet near the router.
c. Plug the other end of Ethernet cable that came in the box into the Powerline adapter.
Check the status lights:
— Power: The power LED turns on. If it does not light, see Chapter 2,
“Troubleshooting”.
— Power Link: The Power Link LED blinks to indicate that the device is connected
to the power line, and that no other Powerline devices have been detected at this
stage.
— Ethernet Link: The Ethernet LED blinks to indicate activity. If not, make sure
that the Ethernet cable on the Powerline adapter that you connected in the
previous step is securely attached to the Powerline adapter and the router, that the
router is connected to the modem, and the router and modem are powered on.
d. Make sure that the Internet port of your router is connected to your MODEM and that
your computer is either connected to a LAN port on the router or to a port on the
Powerline adapter.
Connect other Ethernet Powerline Adapters
1. The default password to configure adapter is “paterna”(with small characters) . You will need
this password later if you want to change the Powerline network password. If you are adding
more than one other Powerline adapter, also note the MAC address given on the label, so that
you will know which device the password is for.
2. Plug your other Powerline devices into free power outlet in your home near to the other
computers and peripherals to be included in your Powerline local area network.
3. Use an Ethernet cable to connect an Ethernet port on each of the computers and peripherals to
the nearest Powerline device.
4. When you plug in a second Powerline adapter into a power outlet, check the Powerline Link
LED. It should turn on and then briefly blink at the same time as the Ethernet Link activity
LED.
This completes the Powerline installation.
Install the 200Mpb Powerline HomePlug EthernetAdapter
Encryption Utility (Highly Recommended)
The utility gives you the option of setting a unique encryption Powerline network password.
Important features:
zThe encryption password is case-sensitive.
zEach device must be set to exactly the same encryption password—if they are to
communicate on the same network. Powerline devices on different networks will not be
able to communicate.
zA default button resets the encryption password to the default password.
zThe encryption password can protect your network from unauthorized access through the
Powerline network.
zThe default password to configure adapter is “paterna”. You will be required to enter it if
you are setting the network password with another Powerline HomePlug Ethernet
Adapter device.
To install the Powerline Encryption Utility, follow these steps:
5. Insert the Powerline HomePlug Ethernet Adapter Resource CD into a CD drive on the
computer that is connected to your router. The CD starts automatically.
If the CD does not start automatically:
— Go to My Computer on the Windows Start menu, and double-click the drive that
contains the 200Mbps Powerline HomePlug Ethernet Adapter Resource CD or
— Select the CD drive and click on the Autorun.exe executable file.
All devices on a Powerline network can be managed from one computer. If you add another
200Mbps Powerline HomePlug Ethernet Adapter device to an existing Powerline network,
you can install the Powerline encryption utility on the computer connected locally to the new
Powerline HomePlug Ethernet Adapter device or on the computer originally used to set up the
Powerline network password. You can use any computer to manage the network, but this
procedure assumes that you are working from the computer that is connected to your router.
1. Click Install Software, and select the language you used.
2. Click OK and the Welcome screen shows.
3. Click Next and shows license agreement declaration. Click Next.
4. Specify where the files will be installed on your computer:
zType a new folder name in Destination Folder field or select another location using the
Browse options and then click OK.
zAccept the default location and click Install button to start installation.
5. Below screen shows the installation status.
6. When the installation is complete, click Finish.
Powerline adapter Configuration
After the management utility is installed, it will create a folder and shortcut in your Start
Menu and on your desktop.
1. Use the Start Menu or Desktop Shortcut to execute the management utility.
2. The utility starts searching for connected Powerline Adapters:
3. The found adapters are shown in the selection window.
Note: If no Adapters are found, make sure all adapters are connected to the electric
circuit. Click “Update List” to search again for available adapters.
Note: It is recommended to configure all your 200Mbps Powerline HomePlug
Ethernet Adapters at the same time. You can do this with the steps described in
“
Multiple adapters configuration”. If you want to configure all
Adapters separately, make sure you start with the adapters in the section
“Other Adapters”.
Multiple adapters configuration
1. Press and hold the CTRL key of your keyboard and select all adapters you want to configure.
The button “Select All” will show and please click it.
Tabla de contenidos
Otros manuales de Adaptador de Eusso
Eusso
Eusso 85Mbps Powerline HomePlug Ethernet Adapter Manual de usuario
Eusso
Eusso GL2411-MU Manual de usuario
Eusso
Eusso UGL2430-UHM Manual de usuario
Eusso
Eusso UGL2430-U2H2 Manual de usuario
Eusso
Eusso UPL5500-201 Manual de usuario
Eusso
Eusso Wireless-N PCI Adapter Manual de usuario
Eusso
Eusso Wireless-N PCI Adapter Manual de usuario
