5
UNPACKING INSTRUCTIONS
The machine comes packed in a cardboard box. It is provided with a working guide and a complementary kit. To unpack the machine, please
follow the next steps:
A. Cut the machine holding strips.
B. Remove the cover of the cardboard box. C. Unscrew and remove the security parts which fix the structure to the cage.
C. Remove all containing groups and parts. Handle with care
CAUTION: Some containing groups and parts into the cage are heavy. Two people are required to manipulate them.
D. Refer to the list of parts and familiarize yourself with all described groups and parts.
E. Read carefully this working guide and see the section “Assembly Instructions” to set up the machine.
GENERAL INFORMATION
LIST OF PARTS INBLADE
Parts to set up the machine:
A1. Main assembly group with lateral brackets UpperCut Manual
A2. Main assembly group with lateral brackets UpperCut Auto
B. Horizontal support group with measurement stops.
C. Panel supports (8 units).
D. Double handle system group Only for UpperCut Manual
E. Adjusting screw system.
F. Cutting heads support.
G. Working guide.
Cutting heads list:
1. Semi-rigids cutting head -Included-
2. Aluminium composite cutting head -Included-
3. Acrylic cutting head -Optional accessory-
4. Triple Blade cutting head -Optional accessory-
5. V-Groove cutting head Rigids -Optional accessory-
6. Re-Board V-Groove Cutting Head -Optional accessory-
7. Foamboard V-Groove Cutting Head -Optional accessory-
8. Glass Cutting Head -Optional accessory-
SET OF ACCESSORIES PROVIDED
Allen keys set (x5).
13 mm wrench.
17 mm wrench.
Tube wrench.
A
1
3
4
5
6 7
2
DEF
C
B
A1 A2
x8
8
