Eureka RIDER 1201 EB Manual de usuario
1
USER’S MANUAL
RIDER 1201 EB
_______________________________________________
EUREKA S.p.a.
Via dell’Artigianato 30/32, 35013 CITTADELLA (PD) ITALY
Tel. ++39 - 049 - 9481800 Fax. ++39 -049 –9481899
INTERNET: www.eurekasweepers.com E-MAIL: info@eurekasweepers.com
2
3
TABLE OF CONTENTS
TOPIC
PAGE
INTRODUCTION
5
MACHINE DESCRIPTION
6
WARNINGS!
7
GENERAL WARNINGS AND RECCOMANDATIONS
8
DISPOSAL
12
TRASPORT - HANDLING
13
MACHINE DESCRIPTION
14
PRIMARY FUNCTIONS AND CONTROLS
16
USING THE MACHINE
20
SETTING
21
RECAHRGING THE BATTERY
22
REPLACING THE FUSES
23
VACUUM CLOSURE CONTROL
25
FILTER SHAKER CONTROL
25
BATTERY CABLE LENGHT
26
SIDE BRUSH CONTROL
27
REPLACING THE SIDE BRUSH
27
EMPTYNG THE DIRT CONTAINER
28
ADJUSTING THE MAIN BRUSH
29
MAIN BRUSH CONTROL
31
REPLACING THE MAIN BRUSH
31
REPLACING THE RIGHT SIDE RUBBER FLAP
32
REPLACING THE REAR RUBBER FLAP
32
REPLACING THE LEFT SIDE RUBBER FLAP
33
REPLACING THE FRONT RUBBER FLAP
33
REPLACING THE FILTER
34
DIMENSIONAL DRAWINGS
35
TECHNICAL CHART
36
PERIODIC SERVICING
38
ORDINARY SERVICING
39
EXTRAORDINARY SERVICING
41
SERVICING AND MAINTENANCE FOR SCHEDULED SERVICING
48
TROUBLE- SHOOTING CHART
50
PRODUCT WARRANTY
51
INSTALLATION FORM FOR WARRANTY APPROVAL
52
DATE OF THE LAST UPDATE 14/01/15
4
5
INTRODUCTION
“EUREKA S.p.a.” , leader manufacturer of sweeping machines,
is pleased to welcome you as an owner of the “RIDER 1201 EB”
sweeper. We are sure that its use will give you great satisfaction
and that while working with the RIDER 1201 EB you will have
the opportunity to appreciate its quality, robustness, and
versatility. The RIDER 1201 EB is suitable for the cleaning of
medium to large areas, for private, industrial and public use. In
this handbook are described and shown various operations of
installation, Check and maintenance, necessary to keep your
RIDER 1201 EB in perfect working condition. These are normal
maintenance operations, which any operator can carry out with
tools normally available. For additional maintenance operations
you should contact your nearest EUREKA service point.
OUR COMPANY AIMS AT THE CONSTANT IMPROVEMENT OF ITS
PRODUCTS AND RESERVES THE RIGHT TO MAKE MODIFICATIONS AND
IMPROVEMENTS WHEN IT CONSIDERS IT ADVISABLE WITHOUT BEING
OBLIGED TO UPGRADE PREVIOUSLY SOLD MACHINES WITH SAID
IMPROVEMENTS AND MODIFICATIONS.
6
MACHINE IDENTIFICATION
The machine and manufacturer are identified through three plates on the rear of the
dirt container
REFER TO THESE DETAILS WHEN ORDERING SPARE PARTS OR MAKING ANY OTHER ENQUIRY
TO THE MANUFACTURER.
EUREKA sweepers conform with the EEC directives and show the CE mark
7
WARNINGS!
THE MACHINE IS NOT APPROVED FOR CIRCULATION ON THE
ROAD.
BEFORE USING THE MACHINE OR CARRYING OUT ANY OPERATION ON IT, ALL
THE PROCEDURES AND WARNINGS DESCRIBED IN THIS MANUAL MUST BE READ
AND UNDERSTOOD.
RIGOROUS COMPLIANCE WITH THE REGULATIONS AND INSTRUCTIONS
CONTAINED IN IT, TOGETHER WITH THE OPERATOR’S ATTENTION AND
PRUDENCE WILL BE THE BEST GUARANTEE AGAINST ACCIDENTS THAT COULD
OCCUR AT WORK.
EUREKA SWEEPERS ARE DESIGNED TO PROVIDE MAXIMUM SAFETY IF USED
ACCORDING TO THE INSTRUCTIONS.
OPERATORS WHO DO NOT KNOW THE REGULATIONS AND PROCEDURES
CONTAINED IN THIS MANUAL MUST BE PREVENTED FROM USING THE
MACHINE.
THE SWEEPER HAS BEEN CONSTRUCTED FOR TOWN AND INDUSTRIAL
CLEANING OPERATIONS WITH THE COLLECTION OF MATERIAL AND ITS
DISPOSAL.
THE USER’S MANUAL IS AN INTEGRAL PART OF THE SWEEPER AND MUST
ACCOMPANY IT UNTIL THE SWEEPER IS DEMOLISHED.
PURSUANT TO DIRECTIVE 89/392 CE, PRESIDENTIAL DECREE 459 DATED
24/07/1996 AND LATER MODIFICATIONS NOTICE IS GIVEN THAT:
OPERATOR IS INTENDED TO MEAN THE PERSON(S) ASSIGNED TO INSTALL,
OPERATE, ADJUST, CARRY OUT ORDINARY SERVICING, CLEAN, REPAIR AND
TRANSPORT THE MACHINE.
EUREKA Srl WILL NOT BE HELD LIABLE FOR ANY PROBLEMS, BREAKAGE,
ACCIDENTS OR OTHER OCCURRENCES DUE TO THE IGNORANCE OF OR THE
NON-APPLICATION OF THE PROCEDURES CONTAINED IN THIS MANUAL OR TO
THE IMPROPER USE OF THE MACHINE.
FURTHERMORE, EUREKA Srl SHALL NOT BE HELD LIABLE FOR THE CARRYING
OUT OF MODIFICATIONS AND/OR THE INSTALLATION OF PARTS OR
ACCESSORIES THEY HAVE NOT BEEN AUTHORISED BEFOREHAND.
8
GENERAL WARNINGS AND RECCOMANDATIONS
DANGER SIGNS - ATTENTION
THIS SYMBOL HIGHLIGHTS ALL THE OPERATIONS THAT REPRESENT A
POTENTIALLY HAZARDOUS SITUATION FOR THE OPERATOR
IT IS THEREFORE NECESSARY TO ADHERE CLOSELY TO THE
CONDITIONS SHOWN BY THIS SYMBOL
DANGER OF BURNING DUE TO VERY HOT SURFACES.
EAR PROTECTORS/PLUGS/MUFFLERS MUST BE WORN.
IN PARTICULAR ENVIRONMENTS OR WORKING CONDITIONS, SOME
MODELS OF THE SWEEPERS COULD PRODUCE AN ACOUSTIC EFFECT
THAT WOULD MAKE THE WEARING OF THESE PROTECTIVE DEVICES
ADVISABLE
GLOVES MUST BE WORN
SAFETY GLASSES OR GOGGLES MUST BE WORN
BE CAREFUL NOT CRUSH YOUR HANDS BETWEEN PARTS IN MOTION
ATTENTION: DO NOT GET IN TOUCH WITH WATER
THE DEVICES MARKED WITH THIS LABEL ARE NOT TO GET WET.
(USUALLY THEY ARE ELECTRICAL COMPONENTS)
9
EMERGENCY SITUATIONS
ONLY FIGHT FIRES WITH POWDER FIRE EXTINGUISHERS
CLEANING AND MAINTENANCE
The machine must be cleaned by persons who have received proper instruction for the purpose,
who know how to cut off the sources of energy and who know the characteristics of the machine
so as not to find themselves in a hazardous situation.
Clean the machine coverings, the panels and commands with cloths soaked in water or a
detergent solution.
Solvents such as petrol, alcohol, etc. must not be used.
Call in specialised personnel to clean the electrical components. Said personnel should use
products that are not corrosive and are anyway suitable for electrical circuits.
Specialised personnel with thorough knowledge of the machine and its components must be
called in to carry out maintenance operations.
Any maintenance and cleaning operation must be carried out with the machine off, with all the
mechanisms still, after the hot sections have cooled down and with the battery disconnected.
When using compressed air guns for cleaning, protect the eyes and hair.
STORAGE THE MACHINE
If the machine is not used for a long period, it is essential:
- to keep the machine in a protected place
- to be sure the dirt container is empty
- to clean the machine inside and outside
- to keep the brushes raised to prevent the bristles getting malfunctioning
- to lock the machine in place with the parking brake
- to remove the key
- to remove the battery
10
- The machine must not be used by non-authorised personnel who have not been
trained to use it properly or by people who are under the influence of substances
that could alter their nervous reflexes (alcohol, psycho pharmaceuticals, drugs etc.)
- Do not use the machine in inflammable areas or where there is the danger of
explosions
- Do not collect material that is alight or anything else that could cause a fire.
(e.g. lit cigarettes).
- Do not remove protections or guards when the machine is in operation.
- Operate the machine from the driving position.
- Do not use the machine to clean objects.
- When maintaining the machine do not wear loose-fitting or unbuttoned clothing.
- Protect eyes and hair when using compressed air or water guns for cleaning the
machine.
- Use devices to raise the machine that are adequate to bear the weight of the
machine itself.
- Do not cause flames or sparks around the machine.
- Disconnect the battery cables before working on the electrical circuit.
-Avoid contact with battery acid, be careful of the hot parts: wait for them to cool
down before starting work.
- Move carefully over uneven or crumbling paving and on slopes.
Do not exceed inclines of 20% in the direction of movement and inclines of
10% crossways to the direction of movement.
- Pay attention when changing direction and or movement direction, slow
down on bends to avoid tipping over.
PRECAUTIONS FOR THE SAFETY OF OPERATORS AND TECHNICIANS
Tabla de contenidos
Otros manuales de Soplador de Eureka
