EUFY T8410X Manual de usuario
Anker Innovations Limited.All rights reserved. eufy Security and eufy Security Logo are
trademarks of Anker Innovations Limited, registered in the United States and other
countries.All other trademarks are the property of their respective owners.
51005002646 V03
QUICK
START GUIDE
Indoor Cam 2K Pan & Tilt
Table of Contents
What’s included 01
Product overview 02
Setting up the system 03
Mounting the indoor cam 05
Powering on the indoor cam 10
HomeKit Statement 10
Notice 11
Customer service 17
English 01
Deutsch 18
Español 33
Français 48
Italiano 63
Nederlands 79
94
Português 105
121
English 0201 English
WHAT’S INCLUDED
Indoor Cam 2K Pan & Tilt
Model:T8410X
Mounting Plate
USB Cable
USB Adapter
Mounting Screw Pack
microSD card (optional)
QSG
PRODUCT OVERVIEW
Indoor Cam 2K Pan & Tilt
1
2
3
45
6
7
1Lens 5Speaker
2Microphone 6Power input
3SD card slot 7SYNC button
4Status LED
English 0403 English
SETTING UP THE SYSTEM
1. Download the eufy Security app from the App Store
(iOS devices) or Google Play (Android devices).
2. Sign up a eufy Security account. Go to the app
homepage.Tap Add Device, and add the IndoorCam
Pan 2K to your system.
3. Follow the on-screen instructions to complete the
setup.
LED Status
LED Status Description
Breathing blue Ready for setup
Solid blue Powered on and working properly
Blinking red Disconnected from the internet
Blinking red once Motion or sound detected
Solid red
Working properly with someone
viewing the live stream or
recording event
Solid bluish violet System is initializing
Flashing blue and red
alternately Firmware upgrade in progress
English 0605 English
MOUNTING THE INDOOR CAM
Select a Location for Mounting
The camera can be placed on a table, shelf, or can be mounted
on a wall or ceiling. Select a location and height where you can
get the desired view, and can reach a power outlet easily.
• Disconnect the Indoor Cam from the power
outlet before mounting.
• Keep the Indoor Cam at least 0.7 ft / 20 cm away
from walls or anything that may obstruct the view.
Do this to avoid infrared reection which can have
a negative impact on the night vision performance.
> 20CM > 20CM
English 0807 English
Mount the Indoor Camera
To mount the Indoor Cam on the ceiling, follow the steps below:
1. Place the positioning
card against the
ceiling and then
mark the points at
which drilling will be
required.
Ceiling
2. Drill holes with a
5/16” (8 mm) drill
bit.
Ceiling
3. Align the holes on the mounting plate with those in the
ceiling. Insert the anchors into the holes; anchors are
necessary for walls that are made out of hard materials such
as concrete, brick, or stucco. Fix the screws with a Phillips-
head screwdriver to fasten the mounting plate to the ceiling.
Ceiling
Ceiling
4. Align the grooves with the mounting plate and rotate the
Indoor Cam clockwise until it clicks into place.
English 1009 English
To mount the Indoor Cam on a wall, we recommend using the
mounting bracket (not provided) as the illustration below. POWERING ON THE INDOOR CAM
Connect the Indoor Cam to a power outlet using the provided
USB cable and USB adapter.After being powered on, the Indoor
Cam will be connected to the system.When it is successfully
connected, the status LED will turn solid blue.
Rotate the Indoor Cam to adjust the view and check it using the
live stream which you can access in the eufy Security app.You
are now all set to use your Indoor Cam.
Tip:
For troubleshooting, check Help on the eufy Security app.
HomeKit Statement
Controlling this HomeKit-enabled accessory automatically and
away from home requires a HomePod,Apple TV, or iPad set up
as a home hub. It is recommended that you update to the latest
software and operating system.
English 1211 English
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Warning: Changes or modications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult
the dealer or an experienced radio/ TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure
requirements. The device can be used in xed/mobile exposure
condition.The min separation distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using
shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue,WA 98004-5541
Telephone:1-800-988-7973
This product complies with the radio interference
requirements of the European Community.
Declaration of Conformity
Hereby,Anker Innovations Limited declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. For the declaration of
conformity, visit the Web site: https://uk.eufylife.com/
English 1413 English
This product can be used across EU member states.
Due to the used enclosure material, the product shall only be
connected to a USB Interface of version 2.0 or higher.
The adapter shall be installed near the equipment and shall be
easily accessible.
Do not use the Device in the environment at too high or too low
temperature, never expose the Device under strong sunshine or
too wet environment.
The suitable temperature forT8410X and accessories is
0°C-40°C.
When charging, please place the device in an environment that has
a normal room temperature and good ventilation.
It is recommended to charge the device in an environment with a
temperature that ranges from 5°C~25°C.
Please ensure to use only the charger offered by the manufacturer.
Using unauthorized charger may cause danger and violate the
authorization of the device and the guarantee article.
This charger is for indoor use only.
The charger type is TEKA012-0502000EU or TEKA-UCA20EU,
output voltage/current is 5Vdc/2A.The plug considered as
disconnect device of adapter.
RF exposure information:The Maximum Permissible Exposure
(MPE) level has been calculated based on a distance of d=20 cm
between the device and the human body.To maintain compliance
with RF exposure requirement, use product that maintain a 20cm
distance between the device and human body.
Wi-Fi Operating Frequency Range: 2412~2472MHz;Wi-Fi Max
Output Power: 14.46 dBm(ERIP)
Bluetooth Operating Frequency Range:2402~2480MHz; Bluetooth
Max Output Power:0.64 dBm(EIRP)
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3,
80807 Munich, Germany
This product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
This symbol means the product must not be discarded
as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper
disposal and recycling helps protect natural resources,
human health and the environment. For more information
on disposal and recycling of this product, contact your
local municipality, disposal service, or the shop where you
bought this product.
IC Statement
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device."
English 1615 English
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement."
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
This product complies with the radio interference
requirements of the United Kingdom.
Declaration of Conformity
Hereby,Anker Innovations Limited declares that the product
type T8410X is in compliance with Radio Equipment Regulations
2017.The full text of the UK declaration of conformity is
available at the following internet address: https://uk.eufylife.com
AnkerTechnology (UK) Ltd I Suite B, Fairgate House, 205 Kings
Road,Tyseley, Birmingham, B11 2AA, United Kingdom
IC RF Statement:
When using the product, maintain a distance of 20cm from the
body to ensure compliance with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20
cm du corps an de vous conformer aux exigences en matière
d'exposition RF.
Tabla de contenidos
Idiomas:
Otros manuales de Cámara digital de EUFY
