EtroVISION EV6150A Manual de usuario
Model
• EV6150A
Before Using the EV6150A
Check the PC requirements
Review the OS platform requirements
Read an special and import precautionary information
Having basic knowledge of network setup and conguration will be helpful
Important Announcements
NOTE: This icon represents a tip for operation.
CAUTION: This icon stands for an action that could affect an operation or
mildly impair the system.
WARNING: This icon indicates an action that will likely impair the system.
About This Guide
Disclaimer
© 2007 Etrovision Technology. All rights reserved.
EtroLink™ & AnyUSB™ are trademarks of Etrovision Technology; other product or
service names mentioned herein are the trademarks of their respective owners.
Information contained in this document may be superseded by updates. No
representation or warranty is given and no liability is assumed by Etrovision
Technology with respect to the accuracy or use of the information, or infringement
of patents or other intellectual property rights. No licenses are conveyed, implicitly
or otherwise, under any intellectual property rights.
1 PRODUCT OVERVIEW...........................................................................................................1
1.1 Product Specications.........................................................................................................1
1.2 Dual Streaming Capabilities..............................................................................................2
1.3 Resolution................................................................................................................................2
1.4 Package Checklist..................................................................................................................2
1.5 Product CD...............................................................................................................................3
1.6 Language Support................................................................................................................3
1.7 Front Camera View...............................................................................................................3
1.8 Rear Camera View ................................................................................................................3
1.9 Physical Connections...........................................................................................................4
2 USING THE EV6150A FOR THE FIRST TIME....................................................................5
2.1 Initial Requirements.............................................................................................................5
Software Requirements..................................................................................................................5
Install EtroScan™................................................................................................................................5
2.2 Physical IP Camera Connections......................................................................................6
Connect to the Network..................................................................................................................6
Connect Digital I/O............................................................................................................................6
Connect Audio In...............................................................................................................................6
Power on IP Camera..........................................................................................................................6
2.3 Initial Network Conguration...........................................................................................6
Factory IP Address.............................................................................................................................6
Using EtroScan™.................................................................................................................................7
Change Network Setting via EtroScan™....................................................................................8
2.4 Access the IP Camera Web Interface............................................................................10
3 ETROLINK™ CONFIGURATION PORT.............................................................................13
3.1 OS Requirements................................................................................................................13
3.2 Setup Using the EtroLink™ Cong Port.......................................................................13
Connecting the IP camera to the PC........................................................................................13
Quick Cong Login.........................................................................................................................14
Quick Wizard - Network.................................................................................................................15
Manually Starting the Quick Cong Wizard...........................................................................17
TABLE OF CONTENTS
TABLE OF CONTENTS
3.3 Factory Default....................................................................................................................18
3.4 Missing root Password......................................................................................................19
4 CAMERA LED INDICATORS...............................................................................................21
5 ADDITIONAL INFORMATION...........................................................................................22
1.1 Product Specifications
Model EV6150A-BI EV6150A-CI
Image Sensor 1/3" Superior Image Quality CCD 1/3" SONY CCD
Lens CS Mount Type, Lens Changeable
Minimum Illumination 0.1 Lux at F2.0, 5~10 Lux
B/W Mode Auto Switch 0.012 Lux at F1.2, 0.0014 Lux
at F1.2 B/W Mode
1/60 ~ 1/110,000 sec. (NTSC) 1/60 ~ 1/120,000 sec. (NTSC)
Shutter Time 1/50 ~ 1/110,000 sec. (PAL)1/50 ~ 1/120,000 sec. (PAL)
510 x 492 (NTSC) 811 x 508 (NTSC)
Number of Effective Pixels
(HxV) 512 x 582 (PAL) 795 x 596 (PAL)
Auto Iris DC Drive
Sync System Internal Lock / Line Lock
Resolution 520 TVL 600 TVL
Camera
S/N Ratio More than 50dB
Video Compression M-JPEG, MPEG-4,H.264 Format Selectable
NTSC: D1(720x480), CIF(352x240), QCIF(176x120)
Resolutions PAL: D1 (720x576), CIF(352x288), QCIF(176x144)
Frame Rate Up to 30fps (NTSC) / 25fps (PAL) @ D1 Resolution
Video Streaming Simultaneous Dual Streams Controllable Frame Rate and Bandwidth
Image Settings Compression, Brightness, Contrast,
Mirror Compression, Brightness, Contrast,
White Balance , Mirror
Bit Rate M-JPEG: 5 Video Quality Level Selectable; MPEG-4/H.264 : 64K~4Mbps
Video Output1CH NTSC/PAL, BNC Connector, 1.0Vp-p with 75 ΩLoading
Video / Audio
AudioAudio In/Out ADPCM
Security Password Protection, IP Address Filtering, User Access Privelge
Network Supported Protocols TCP/IP, DHCP, PPPoE, HTTP, DDNS, NTP, FTP, SMTP, UDP, RTP,
RTSP,
3GPP, UPnP
Application Programming
InterfaceEtroSDK™ 3.0
Intelligent Video Video Motion Detection
Alarm Events Intelligent Video, File Upload via FTP and E-mail, Notification via E-mail,
External Output Activation, File Recording to Local SD Card
Video Buffer Pre-and Post Alarm Buffer up to 10-sec
Configuration EtroScan™ Utility
System
Integration &
Maintanance
Web Browser Microsoft Internet Explorer 6.0, or Above
CasingMetal (Aluminium)
Dimension 76(W) X 58(H)X 109(D) mm
Processor and Memory ARM9 Base SoC, 128MB RAM, 16MB Flash
Power 12V DC / 1A, PoE
Connectors RJ-45 for 10BASE-T/100 BASE-TX,DC Jack ,EtroLink™, BNC,
Iris Control Adaptor, Mini Din (DI/DO/RS485), USB A-Type Female ,
SD/SDHC Card Slot, Auido In, Audio Out
CPU Pentinum 4, 2.4GHz and Above
Hard Disk 40 GB or Above
Memory 512 MB or Above
Operating System Windows XP with SP2 or Above / Windows 2000 with SP4 or Above
Video Resolution SVGA or XGA with 1024x768 Resolution
General
Software DirectX 9.0C or Above
The EV6156A Box IP Camera comes equipped with a WDR CCD sensor and
Day/Night mode sensor to overcome challenging lighting conditions. The sensor
has a variety of settings to ne tune the camera to suit your needs. With H.264
compression technology, the EV6156A delivers superior image quality while
minimizing bandwidth requirements.
1 PRODUCT OVERVIEW
1 PRODUCT OVERVIEW
Temperature: 0 ºC ~ 40 ºC (32 ºF ~ 104 ºF)
Operating Conditions Humidity: 20% ~ 80% RH
Power over Ethernet Yes
Approvals CE, FCC, RoHS
Weight 390g
Included AccessoriesPower Adapter, USB Cable, CD-ROM (User Manual, Free Bundle NVR),
Mini Din Cable
1.2 Dual Streaming Capabilities
The EV6150A Series supports dual streams simultaneously.
Combination options include:
Stream 1 Stream 2
H.264 M-JPEG
H.264 MPEG-4
H.264 H.264
M-JPEG MPEG-4
M-JPEG H.264
M-JPEG M-JPEG
MPEG-4 H.264
MPEG-4 M-JPEG
MPEG-4 MPEG-4
If users assign the same stream format for both Stream1 and 2, the image
may be unable to achieve real-time performance. This is a system limitation.
1.3 Resolution Resolution CIF QCIF D1
NTSC 352X240 176X120 720X480
PAL 352X288 176X144 720X576
1.4 Package Checklist
The EV6150A packaging will include the following materials.
• EV6150A IP Camera x 1
• Power Adapter x 1
1 PRODUCT OVERVIEW
• USB Cable x 1
• Mini DIN Cable x 1
• Product CD x 1
1.5 Product CD
The product CD contains
• EtroStation™3.0 NVR management software
• 16CH Live View/Recording/4CH Playback
• User’s Manual
1.6 Language Support
• English
1.7 Front Camera View
1.8 Rear Camera View
1 PRODUCT OVERVIEW
1.9 Physical Connections
1. ICR Control (EV6150A-CI Only)
2. Auto Iris Control Adaptor
3. EtroLink™ USB Cong Port
4. 12V DC Power Input
5. mini DIN I/O Socket
6. SD Card Slot
7. Wi USB Dongle port
8. Audio In/Out
9. BNC Video Out Connector
10. RJ-45 Ethernet Port
11. Power LED
2 USING THE EV6150A FOR THE FIRST TIME
2 USING THE EV6150A FOR THE FIRST TIME
2 USING THE EV6150A FOR THE FIRST TIME
2.1 Initial Requirements
Software Requirements
Installation and conguration require the following:
• Microsoft Windows 2000 or XP Operating System
• Microsoft Internet Explorer version 6 or higher
Other browsers (i.e. Mozilla Firefox) are not currently supported.
Install EtroScan™
EtroScan™ is a utility is used to congure network settings for IP cameras and other
devices (i.e. NVR). EtroScan™ is available via two methods.
Install EtroStation™ 3.0
EtroStation™ 3.0 includes the EtroScan™ utility. EtroStation™ is on the product CD
that accompanies the EV6150A. Please refer to the EtroStation™ documentation for
installation instructions.
Download from Etrovision’s Website
EtroScan™ can also be downloaded from Etrovision’s website. It is available in the
Software Tools section of the Download area, http://www.etrovision.com/
Download_list.aspx?no=5.
After downloading the archived le, extract the contents and run Setup.exe to
install EtroScan.
2 USING THE EV6150A FOR THE FIRST TIME
2 USING THE EV6150A FOR THE FIRST TIME
2.2 Physical IP Camera Connections
Connect to the Network
Connect the EV6150A to network hub/switch via a standard CAT5 Ethernet cable
with an RJ-45 connector. Please note that the PC must be on the same network
domain as the IP camera.
Connect Digital I/O
For digital I/O functionality, connect the corresponding devices with the IP camera
via the digital I/O terminal.
Properly align the wiring and terminals when connecting; an
improper connection can damage the camera.
Connect Audio In
For audio functionality, connect the audio input cable.
Video icker may occur when enabling/disenabling audio.
This situation normally only lasts for a second.
Power on IP Camera
Connect the power adapter to the power connector. The adapter should be
connected to 110v~22OV AC socket. There is no power button on the camera, so
connecting/disconnecting the power adapter will start/shutdown the IP camera.
2.3 Initial Network Conguration
To congure the IP camera’s network settings use the EtroScan™ utility.
Factory IP Address
Below are the initial factory IP address settings for the IP camera:
IP Address 192.168.1.2
Subnet Mask 255.255.255.0
Gateway 192.168.1.1
2 USING THE EV6150A FOR THE FIRST TIME
2 USING THE EV6150A FOR THE FIRST TIME
Using EtroScan™
EtroScan™ allows users to easily nd an IP camera and congure the settings.
Select EtroScan™ from the start menu to start.
Press the Scan button to list the IP and MAC address list for IP cameras on the
network.
A new IP camera will display the factory IP address, 192.168.1.2. However, if
multiple new devices are present on the network, then multiple instances of
192.168.1.2 will be listed.
Otros manuales para EV6150A
1
Tabla de contenidos
Otros manuales de Cámara digital de EtroVISION
